

USB Telegraph
- Size
- 50 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 57
- Pads
- 150
- Tracks, vias
- 341, 214
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Feb 2024
- Updated
- 6 May 2024
Overview
USB Telegraph is an open-source printed circuit board by benmalenfant, from the benmalenfant/USB_Telegraph repository on GitHub. It is a 2-layer board of 50 × 25 mm with 34 parts on 57 nets, routed with 341 tracks and 214 vias.
It is built around the USBLC6-2SC6, FR107 and NP2302FVR-J-G. Its parts include 13 resistors, 9 capacitors, 5 connectors, 3 ICs and 1 diode. It belongs with the STM32 boards of this library.
Main components
3USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)FR107
SOD-123-65℃~+150℃ 1.3V@1A 1A 1kV 25A 500ns 5uA@1kV SOD-123 Fast Recovery / High Efficiency Diodes ROHSJSMSEMIFast Recovery / High Efficiency DiodesNP2302FVR-J-G
SOT-23-55℃~+150℃ 1 N-channel 1.25W 1.2V 150pF 20V 21pF 24pF 2A 3.5nC 88mΩ@2.5V N-Channel SOT-23 MOSFETs ROHSNATLINEARMOSFETs
README
README.mdUSB_Telegraph
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C10 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R8, R9, R12, R13 |
| 2 | 1.5k | Resistor_SMD:R_0402_1005Metric | R7, R11 |
| 2 | 20pf | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | Screw_Terminal_01x01 | Mounting_holes:M4 plated | J3, J4 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 22 | Resistor_SMD:R_2010_5025Metric | R10 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J5 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | FR107 | Diode_SMD:D_SOD-123F | D1 |
| 1 | NP2302FVR | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | R_Potentiometer | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | RV1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_C_Receptacle_USB2.0 | Connectors:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U2 |
Similar boards
- 2 layers130 × 180 mm

- 2 layers110.5 × 90.8 mm

TeslaSMPS
devfabiosilva/TeslaSMPS
DIY: High Voltage Range Switching Mode Power Supply for Embedded and Solar systems
112 parts7Unlicense - 4 layers70 × 45 mm

Emanresu G431
EmanresuEmanreztuneb/SimpleFOC_G431_Motordriver
A motordriver based in STM's G431 Drone ESC.
112 parts3 - 2 layers98.8 × 85.2 mm

Hub
maxime-leblan/Projet-VigiZone-E3-2026-ESIEE-Paris
VigiZone est un système de prévention anti-collision entre engins et piétons dans le BTP. Réalisé dans le cadre de notre projet de fin d'année en 1ère année du cycle ingénieur à ESIEE Paris.
34 parts2BSD-2-Clause - 4 layers89.8 × 41.5 mm

- 2 layers

Power driver
MakerMylo/Embroiderino
Forked from an old gitlab repo to hold on to forever.
24 parts1GPL-3.0 - 2 layers99.7 × 48.8 mm

AC DC Wandler
MoElashmawi/Flyback-AC-DC-Converter
Flyback AC-DC Converter (230V AC to 12V DC) — Full SMPS design using VIPer22A PWM Controller. Schematic, PCB layout & 3D render in KiCad.
34 parts1MIT - 4 layers100 × 175 mm

Questions
How big is the USB Telegraph PCB?
It measures 50 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USB Telegraph use?
34 parts, built around the USBLC6-2SC6, FR107 and NP2302FVR-J-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB Telegraph KiCad files?
From the benmalenfant/USB_Telegraph repository on GitHub, at the commit this page was made from: the board is HW/USB_Telegraph.kicad_pcb and its schematic HW/USB_Telegraph.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB Telegraph design in my own project?
Its repository states no licence, so its author keeps all rights: ask benmalenfant before reusing the design.