Lora tracker V3
diy asset tracker
- Size
- 116.3 × 114.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 223
- Pads
- 426
- Tracks, vias
- 377, 61
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210824)
- Created
- 21 Apr 2021
- Updated
- 27 May 2022
Overview
Lora tracker V3 is an open-source printed circuit board by bendelathouwer, from the bendelathouwer/asset-tracker repository on GitHub. It is a 2-layer board of 116.3 × 114.5 mm with 76 parts on 223 nets, routed with 377 tracks and 61 vias.
It is built around the ESP32-WROOM-32, DS28CM00R-A00+T and MAX5035AUSA+T, with the G3VM-61HR2(TR05), LIS3DH and BSS138 among its other parts. Its parts include 23 capacitors, 16 resistors, 8 ICs, 4 connectors and 2 transistors. It belongs with the radio and wireless boards and the ESP32 and STM32 boards of this library.
Main components
7ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesDS28CM00R-A00+T
SOT-23-5-40℃~+85℃ 1.62V~5.25V 400Kbps I2C、SMBus SOT-23-5 Interface - Specialized ROHSMaxim Integrated (Analog Devices)Interface - SpecializedMAX5035AUSA+T
SOIC-80℃~+85℃@(TA) 1 125kHz 1A 3.3V 7.5V~76V Buck Buck Built-in Fixed No SOIC-8 DC-DC Converters ROHSMaxim Integrated (Analog Devices)DC-DC ConvertersG3VM-61HR2(TR05)
SOP-61.8V 150us 4A 600us 60V 7mΩ SOP-6 Solid State Relays (MOS Output) ROHSOmronSolid State Relays (MOS Output)LIS3DH
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 500nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsRFM98W-433S2
LCC-16_16X16mmLCC-16_16X16mm New Arrivals ROHSHopeRF Micro-electronicsUncategorised
README
README.mdLoRa asset tracker
a Lora asset tracker loosly based on a arduino mkr wan 1310. This asset tracker is going to be used on the quadVelo. And is made with the eurocircuits tool and for eurocircuits
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10uF | vanalles:0603 | C8, C11, C13, C14, C17, C20, C22 |
| 5 | 100nF | vanalles:0603 | C9, C10, C12, C18, C23 |
| 4 | 10K | vanalles:0603 | R6, R10, R12, R13 |
| 3 | 0.1uF | vanalles:0603 | C5, C6, C16 |
| 3 | 10K | vanalles:0603RL | R14, R15, R16 |
| 2 | BSS138 | halfgeleiders:sot-23, | Q1, Q2 |
| 2 | G*** | kibuzzard-61389C09 | kibuzzard-61389C09, kibuzzard-61389C09 |
| 2 | NM | vanalles:0603 | C1, C2 |
| 1 | 0 | vanalles:0603RL | R1 |
| 1 | 0.22uF/100V | vanalles:CAPAE1030X1050D1200L350X90N | C4 |
| 1 | 100K | vanalles:3314G-1-201E bourns trimmer | RV1 |
| 1 | 100uH | vanalles:DO5022p | L1 |
| 1 | 10nF | vanalles:0603 | C21 |
| 1 | 120nF | vanalles:0603 | C19 |
| 1 | 130Kohm/1% | vanalles:0603 | R9 |
| 1 | 1Mohm | vanalles:0603 | R2 |
| 1 | 1uF | vanalles:0603 | C15 |
| 1 | 220 | vanalles:0603 | R11 |
| 1 | 43.5Kohm/1% | vanalles:0603 | R8 |
| 1 | 58K | vanalles:0603 | R5 |
| 1 | 58Kohm | vanalles:0603 | R3 |
| 1 | 5n6 | vanalles:0603 | L2 |
| 1 | 68uF/100V | vanalles:CAPAE1030X1050D1200L350X90N | C3 |
| 1 | 68uF/10V | vanalles:CAPAE1030X1050D1200L350X90N | C7 |
| 1 | 900K | vanalles:0603 | R4 |
| 1 | ATECC608B | halfgeleiders:soic p1.27 lengt 5.40 | U7 |
| 1 | Antenna_Shield | connectors_user:ufl connector | AE1 |
| 1 | Battery_Cell | vanalles:3012TR | BT1 |
| 1 | ConnectEVE | connectors_user:10pin header | DISP1 |
| 1 | DS28CM00R-A00+T | halfgeleiders:SOT-25 | U6 |
| 1 | ESP32-WROOM | Module:ESP32-WROOM-32 | U8 |
| 1 | G*** | kibuzzard-613B6735 | kibuzzard-613B6735 |
| 1 | G*** | kibuzzard-61389CC5 | kibuzzard-61389CC5 |
| 1 | G*** | kibuzzard-613B6746 | kibuzzard-613B6746 |
| 1 | G*** | kibuzzard-613F18F5 | kibuzzard-613F18F5 |
| 1 | G*** | kibuzzard-613B6752 | kibuzzard-613B6752 |
| 1 | G*** | kibuzzard-613F1907 | kibuzzard-613F1907 |
| 1 | G*** | kibuzzard-613B3465 | kibuzzard-613B3465 |
| 1 | G*** | kibuzzard-613B3452 | kibuzzard-613B3452 |
| 1 | G3VM-61HR2(TR05) | halfgeleiders:sop4 P=2.54 | U5 |
| 1 | Jumper_2_Open | vanalles:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | LIS3DH | halfgeleiders:QFN-16_0.5MM | U4 |
| 1 | MAX5035AUSA | halfgeleiders:soic HV clearance | U3 |
| 1 | MBRM5100 | halfgeleiders:DPAK | D1 |
| 1 | MLX91221 | halfgeleiders:SOIC-8 | U9 |
| 1 | NM | vanalles:0603RL | R17 |
| 1 | RFM98W-433S2 | Module:XCVR_RFM98W-433S2 | MOD1 |
| 1 | Relais | vanalles:G5V-1 | RL1 |
| 1 | STM32F407ZGTx | halfgeleiders:STM32F407ZGT6 | U1 |
| 1 | Screw_Terminal_01x02 | connectors_user:2pin_screw | J1 |
| 1 | TAGconnect_ESP | connectors_user:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | CON1 |
| 1 | buzzer | vanalles:PROSIGNAL_ABI-017-RC | PZ1 |
| 1 | screw terminal | connectors_user:2pin_screw | con1 |
| 1 | sma | connectors_user:ufl connector | AE2 |
| 1 | teseo-LIV | Module:SON_STM_TESEO-LIV3R | MOD2 |
| 1 | xt60 | connectors_user:AMASS_XT60PW-F | con2 |
More from bendelathouwer/asset-tracker
4- 2 layers116.3 × 114.5 mm

- 2 layers100 × 100 mm

- 2 layers39.5 × 53.6 mm

- 2 layers42.1 × 72.6 mm

Similar boards
- 2 layers24 × 38 mm

- 2 layers55.6 × 55.5 mm

- 4 layers35.1 × 77 mm

- 4 layers94.5 × 98.5 mm

Kraky
thesh4dows/Kraky
its a diy project of a device that emulates the flipper zero but using well available and cheap parts
42 parts1GPL-3.0 - 2 layers69 × 34.5 mm

Lora ch1
0x000f1/lora-ch1
This project is based on the ESP32 microcontroller that behaves like a bridge between mobile devices and the modules.
37 parts - 2 layers

- 2 layers46 × 76 mm

- 2 layers33 × 27.9 mm

Rfm69 breakout
jd-boyd/bts_ref_dev_adapter
Example/test circuit of ams1117 chip meant to plug into space of 7505.
5 parts
Questions
How big is the Lora tracker V3 PCB?
It measures 116.3 × 114.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lora tracker V3 use?
76 parts, built around the ESP32-WROOM-32, DS28CM00R-A00+T, MAX5035AUSA+T and G3VM-61HR2(TR05). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lora tracker V3 KiCad files?
From the bendelathouwer/asset-tracker repository on GitHub, at the commit this page was made from: the board is pcb/asset tracker LoRa/lora tracker V3/Lora_tracker_V3/Lora_tracker_V3.kicad_pcb and its schematic pcb/asset tracker LoRa/LoRa tracker/IO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lora tracker V3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask bendelathouwer before reusing the design.