Skip to the content
2 layersAirquality pcb, the printed circuit board in 3D

Airquality pcb

bendecaf/iot-pcbs
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
67
Pads
86
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
10 Jun 2022
Updated
31 Mar 2023

Overview

Airquality pcb is an open-source printed circuit board by bendecaf, from the bendecaf/iot-pcbs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 7 parts on 67 nets.

It is built around the SCD30, SPS30 and USB4105-GF-A. Its parts include 3 connectors, 2 ICs, 1 resistor and 1 diode. It belongs with the sensors and measurement boards and the ESP32 boards of this library.

Main components

3

README

README.md

iot-pcbs

Parts

7
QtyValueFootprintReferences
1ESP32-WROOM-EEspressif:ESP32-WROOM-32EU1
1Power LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1SCD30Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalU2
1SGP40Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ2
1SPS30Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ1
1USB4105-GF-Agct:GCT_USB4105-GF-AJ3

More from bendecaf/iot-pcbs

1
  • 2 layers93.8 × 97.5 mmDewpoint pcb, the printed circuit board in 3D

    Dewpoint pcb

    bendecaf/iot-pcbs

    23 partsGPL-3.0

Similar boards

  • 2 layers100 × 100 mmAir Quality Sensor, the printed circuit board in 3D

    Air Quality Sensor

    willem-pennings/Air-Quality-Sensor

    Design files for a Home Assistant-compatible air quality sensor/monitor

    17 parts12
  • 4 layers43.4 × 69 mmRespira fiware, the printed circuit board in 3D

    Respira fiware

    panStamp/respira_fiware

    Open FIWARE air monitoring device for urban applications

    12 parts7GPL-3.0
  • 2 layers80 × 60 mmKNX2HovalGateway, the printed circuit board in 3D

    KNX2HovalGateway

    Blizzard26/OAM-KNX2HovalGateway

    OpenKNX Application to connect KNX Bus to Hoval TopTronic Bus

    41 parts1
  • 2 layers99.8 × 65 mmHandheldAerosolSensor, the printed circuit board in 3D

    HandheldAerosolSensor

    mrWheel/handheldAerosolSensor

    This project describes a battery-powered, low-power air quality monitor

    35 parts
  • 2 layers152.4 × 63.5 mmHitteStress2023 pcb, the printed circuit board in 3D

    HitteStress2023 pcb

    TTNApeldoorn/aid-hittestress-2023

    Hittestres sensor for project Homerusstraat

    11 partsCC0-1.0
  • 2 layers92.5 × 86.5 mmSecondcansat, the printed circuit board in 3D

    Secondcansat

    UAH-Cansat2020-Valkyrie/PCB

    61 parts
  • 2 layers114.2 × 36.8 mmAirbox, the printed circuit board in 3D

    Airbox

    Alacrity-Education/AirBoxV2

    The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.

    68 parts6GPL-3.0

Questions

What parts does the Airquality pcb use?

7 parts, built around the SCD30, SPS30 and USB4105-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Airquality pcb KiCad files?

From the bendecaf/iot-pcbs repository on GitHub, at the commit this page was made from: the board is airquality-pcb/airquality-pcb.kicad_pcb and its schematic airquality-pcb/airquality-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Airquality pcb design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).