
Beacon
- Size
- 43.5 × 61.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 50
- Pads
- 194
- Tracks, vias
- 184, 31
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Feb 2024
- Updated
- 2 Apr 2024
Overview
Beacon is an open-source printed circuit board by ben-olaivar, from the ben-olaivar/ECE445_PCB repository on GitHub. It is a 2-layer board of 43.5 × 61.5 mm with 20 parts on 50 nets, routed with 184 tracks and 31 vias.
It is built around the ATMEGA328PB-AU, LM3670MF-1.8 and RFM96W-433S2, with the SAM-M8Q-0 among its other parts. Its parts include 5 capacitors, 4 ICs, 4 connectors, 3 resistors and 1 inductor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328PB-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 27 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM3670MF-1.8
SOT-23-5-40℃~+85℃@(TA) 1 1.8V 15uA 1MHz 2.5V~5.5V 350mA Buck Buck Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersRFM96W-433S2
LCC-16_16X16mmLCC-16_16X16mm New Arrivals ROHSHOPE MICROELECTRONICSUncategorisedSAM-M8Q-0
SMD-20P,15x15mmUncategorisedu-blox
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 1 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 2.2 uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | ATmega328PB-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | Antenna | Connector_Coaxial:SMA_Amphenol_901-143_Horizontal | AE1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Crystal | footprints:XTAL_ABLS-16_ABR | Y1 |
| 1 | LM3670MF | Package_TO_SOT_SMD:TSOT-23-5 | U4 |
| 1 | RFM96W-433S2 | RF_Module:HOPERF_RFM9XW_THT | U2 |
| 1 | SAM-M8Q | RF_GPS:ublox_SAM-M8Q | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645 | SW_RESET1 |
More from ben-olaivar/ECE445_PCB
1- 2 layers64 × 100 mm

Similar boards
- 4 layers39 × 80 mm

Flight computer
rice-eclipse/flight-computer
Custom STM32-Based flight computer to gather data from IMUs, altimeters, and GPS, and control in-flight pyrotechnic events.
153 parts2 - 2 layers43 × 43 mm

- 2 layers88.4 × 80 mm

LHS Controller PCB
dmcke5/ZenDeck
This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.
76 parts133CERN-OHL-S-2.0 - 2 layers101.5 × 25.5 mm

- 4 layers60 × 15 mm

Ring
KawaharaLab/ISWC2026_picoRingdual
This repository contains the hardware design files, firmware, and evaluation applications for the dual-wearable system (Finger Ring and Wristband) presented in our ISWC 2026 paper.
54 parts1 - 4 layers50 × 50 mm

- 2 layers20.1 × 78 mm

BluetoothReciever
A-ry-A/Bluetooth-to-headphonejack
a pcb design for a bluetooth headphone where you plug in your wired headphones
39 parts - 2 layers61.9 × 36.8 mm

TheXeric
nikolasbtks/TheXeric-PCB
An open-source hardware design, built using KiCad, based on ATmega-4809 microcontroller.
54 parts
Questions
How big is the Beacon PCB?
It measures 43.5 × 61.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Beacon use?
20 parts, built around the ATMEGA328PB-AU, LM3670MF-1.8, RFM96W-433S2 and SAM-M8Q-0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Beacon KiCad files?
From the ben-olaivar/ECE445_PCB repository on GitHub, at the commit this page was made from: the board is boards/beacon/beacon.kicad_pcb and its schematic boards/beacon/beacon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Beacon design in my own project?
Its repository states no licence, so its author keeps all rights: ask ben-olaivar before reusing the design.