
YM2151 STM32 VGM
AidanHockey5/YM2151_VGM_STM32
A hardware arcade video game music player based on the STM32 platform driving a YM2151

Implementation of an IoT solution for growing plants. Development of the Bill of Materials (BOM), Specification Document, and PCB Fabrication. Electrical schematics, circuit design, and component soldering. Firmware development in C for Atmega328p and ESP328p microcontrollers
Le kube is an open-source printed circuit board by bebosson, from the bebosson/kube_elec repository on GitHub. It is a 2-layer board of 51.6 × 133.4 mm with 55 parts on 54 nets, routed with 481 tracks and 62 vias.
It is built around the ATMEGA328PB-AU, IRLB8721PBF and LD1117. Its parts include 20 capacitors, 15 resistors, 5 ICs, 5 switches and 3 connectors. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Implementation of an IoT solution for growing plants.
Development of the Bill of Materials (BOM), Specification Document, and PCB Fabrication.
Electrical schematics, circuit design, and component soldering.
Firmware development in C for Atmega328p and ESP328p microcontrollers, along with an Adafruit screen.
Implementation of UART, SPI, and I2C protocols, AT command usage, EEPROM memory handling, timers, and interrupts.
LAMP stack setup on Raspberry Pi with JavaScript and MySQL solutions.

The data collected by the sensors are sent via wifi and accessible online, as well as on the Oled screen.
Variables monitored by the captors:


| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10K | Le_kube:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R13, R15 |
| 6 | 100nF | Le_kube:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C6, C7, C14, C18 |
| 5 | 1µF | Le_kube:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9, C12, C13, C17 |
| 3 | SW_Push | Le_kube:KEY-SMD_4P-L12.0-W12.0-P5.00-LS15.2 | SW3, SW4, SW5 |
| 2 | 10µF | Le_kube:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, CP0 |
| 2 | 30pF | Le_kube:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 2 | 4.7K | Le_kube:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | LOGO | Le_kube:logo | G***, G*** |
| 1 | 1.6K | Le_kube:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 10nF | Le_kube:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 1 | 128x64_OLED | Le_kube:OLED-0.96-12864 | U2 |
| 1 | 1M | Le_kube:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 2.2µF | Le_kube:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11 |
| 1 | 330R | Le_kube:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 4.7µF | Le_kube:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 470pF | Le_kube:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 1 | 910K | Le_kube:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | ATmega328PB-AU | Le_kube:ATMEGA328PB-AU(TQFP-32_L7.0-W7.0-P0.80-LS9.0-BL) | U0 |
| 1 | Barrel_Jack_Switch | Le_kube:PORT-JACK(DC-IN-TH_DC-003-2A-1.3) | J3 |
| 1 | Conn_01x06_Male | Le_kube:AVR-ISP(IDC-TH_6P-P2.54_C11214) | J1 |
| 1 | Crystal | Le_kube:Crystal(HC-49S_L11.4-W4.8) | Y1 |
| 1 | D | Le_kube:SOD-323_L1.8-W1.3-LS2.5-RD | D1 |
| 1 | ESP8266-01_ESP-01 | Le_kube:ESP-01S(WIFIM-TH_8P-L24.7-W14.4-P2.54) | U4 |
| 1 | I/O | Le_kube:SW-TH_L8.0-W5.11-P5.08_TP11SH8CQE | SW1 |
| 1 | IRLB8721PBF | Le_kube:MOSFET(DPAK_L6.5-W6.0-P2.29-LS9.9-BR) | Q1 |
| 1 | LD1117 | Le_kube:LD1117(SOT-223_L6.7-W3.5-P2.30-BR) | VR1 |
| 1 | LDR | Le_kube:LDR(RES-TH_L5.1-W4.3-P3.40-D0.5) | LDR1 |
| 1 | LM75A | Le_kube:TEMP_SENSOR(SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL) | U1 |
| 1 | PROBE | Le_kube:PROBE | C19 |
| 1 | RST | Le_kube:KEY-SMD_4P-L12.0-W12.0-P5.00-LS15.2 | SW2 |
| 1 | TLC555CDR | Le_kube:TLC555(SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL) | U3 |
| 1 | USB_A | Le_kube:USB-A-TH_USB-302-T | J2 |

AidanHockey5/YM2151_VGM_STM32
A hardware arcade video game music player based on the STM32 platform driving a YM2151




kevinkrieger/CAN
CAN repository containing my CAN project, kicad files, firmware, datasheets, references, etc.

loldavid6/Theia
An easy, cheap and open source way to add IoT to a light switch.

CrashBangProto/Toadstool-Mega328
The Toadstool family is made up of breadboard-friendly prototyping boards that house a microcontroller, and modules called Caps that connect using a standard header.

It measures 51.6 × 133.4 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the ATMEGA328PB-AU, IRLB8721PBF and LD1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bebosson/kube_elec repository on GitHub, at the commit this page was made from: the board is CAO/Le_kube.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bebosson before reusing the design.