Skip to the content
2 layers129.8 × 67.5 mmSchem, the printed circuit board in 3D
Size
129.8 × 67.5 mm
Copper layers
2
Thickness
2.5 mm
Parts
180
Nets
119
Pads
619
Tracks, vias
2,131, 95
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Feb 2020
Updated
3 Dec 2022

Parts

180
QtyValueFootprintReferences
180.1uCapacitor_SMD:C_1206_3216MetricC1, C2, C3, C4, C5, C12, C13, C16, C19, C20, C21, C22, C23, C24, C25, C26 +2
1820kResistor_SMD:R_1206_3216MetricR1, R2, R3, R4, R6, R21, R23, R26, R27, R34, R75, R76, R77, R78, R79, R80 +2
1510kResistor_SMD:R_1206_3216MetricR15, R28, R29, R30, R31, R32, R33, R38, R69, R70, R71, R72, R83, R84, R85
154.7kResistor_SMD:R_1206_3216MetricR17, R18, R19, R36, R37, R39, R41, R42, R43, R44, R50, R51, R52, R54, R66
13BC817Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q6, Q7, Q9, Q10, Q11, Q12, Q13, Q16, Q18
101kResistor_SMD:R_1206_3216MetricR11, R12, R13, R14, R16, R40, R45, R46, R47, R48
72kResistor_SMD:R_1206_3216MetricR5, R7, R10, R25, R53, R57, R61
65kResistor_SMD:R_1206_3216MetricR9, R24, R49, R60, R63, R65
6BYC10Package_TO_SOT_SMD:TO-263-2D1, D2, D3, D4, D12, D13
34.8kResistor_SMD:R_1206_3216MetricR8, R20, R58
390kResistor_SMD:R_1206_3216MetricR35, R62, R64
3BC807Package_TO_SOT_SMD:SOT-23Q14, Q15, Q17
3CDZ44-CDIPackage_TO_SOT_THT:TO-220-3_VerticalT1, T3, T5
3IRF4905Package_TO_SOT_THT:TO-220-3_VerticalT2, T4, T6
210uCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC14, C15
21uCapacitor_SMD:C_1206_3216MetricC6, C7
2220uCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC11, C17
2640Resistor_SMD:R_1206_3216MetricR67, R73
2IS25LQPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU4, U6
2SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW1, SW2
2adc_red1Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ6, J18
2motor_tmpConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ4, J5
10.01uCapacitor_SMD:C_1206_3216MetricC10
10.22uCapacitor_SMD:C_1206_3216MetricC18
11Resistor_SMD:R_1206_3216MetricR22
11.2V_ledLED_SMD:LED_1206_3216MetricD15
110.5kResistor_SMD:R_1206_3216MetricR56
1120Resistor_SMD:R_1206_3216MetricR68
12.5V_ledLED_SMD:LED_1206_3216MetricD14
13.3V_ledLED_SMD:LED_1206_3216MetricD10
13AFuse:Fuse_2512_6332MetricF2
150Amy:fuse_20mmF1
150kResistor_SMD:R_1206_3216MetricR74
15V_ledLED_SMD:LED_1206_3216MetricD9
163.4kResistor_SMD:R_1206_3216MetricR55
168uInductor_SMD:L_12x12mm_H4.5mmU12
1A8498Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU8
1AP2138Package_TO_SOT_SMD:SOT-23U10
1B350BDiode_SMD:D_SMBU9
1CFPS-39-12MOscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mmU1
1EP4CE6Package_QFP:LQFP-144_20x20mm_P0.5mmU2
1JTAGConnector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_VerticalU3
1LD1117Package_TO_SOT_SMD:SOT-223U11
1LF33CDTPackage_TO_SOT_SMD:TO-252-2U5
1MPC3008Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU7
1ON/OFFConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_VerticalJ20
1POWER_INConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_VerticalJ8
1break1Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ9
1break2Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ11
1break_trigLED_SMD:LED_1206_3216MetricD6
1diag_ledLED_SMD:LED_1206_3216MetricD8
1doneLED_SMD:LED_1206_3216MetricD11
1halConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ13
1hal_errLED_SMD:LED_1206_3216MetricD5
1impulseConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ12
1lampConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ21
1motor_outConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_3-G-5,08_1x03_P5.08mm_VerticalJ2
1no_breakConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ1
1no_halConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ10
1no_tempConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ14
1speedConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ15
1testConnector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_VerticalJ3
1tmp_excdLED_SMD:LED_1206_3216MetricD7

Similar boards

  • 2 layers50 × 50 mmHuhnix, the printed circuit board in 3D

    Huhnix

    Jeija/huhnix

    Automatic chicken door system with AVR, DCF77 time signal receiver and ESP8266 WiFi module

    32 parts4
  • 2 layers127 × 110 mmUNICON board, the printed circuit board in 3D

    UNICON board

    dodotronix/RobotClaire

    This project is focused on a design of an autonomous robot including its electronics and basic software to present robot's features

    132 parts
  • 4 layers100 × 114 mmInkube ephys v4 3, the printed circuit board in 3D

    Inkube ephys v4 3

    maurer-lbb/inkube_hardware

    Open-source hardware (CAD + PCB) for inkudock, a modular incubator and closed-loop electrophysiology, and a water compartment lid preventing evaporation from cell cultures.

    63 parts
  • 2 layers90 × 108 mmMotorCtrl3, the printed circuit board in 3D

    MotorCtrl3

    Kreyl/nute

    Automatically exported from code.google.com/p/nute

    279 parts
  • 4 layers129 × 104.6 mmPC-1100X, the printed circuit board in 3D

    PC-1100X

    zscircuits/zs1100a

    All files hardware and software related to the zs1100a

    528 parts76
  • 2 layers89.6 × 79 mmTDR 5351 core, the printed circuit board in 3D

    TDR 5351 core

    MR-DOS/TDR_diploma_thesis

    Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.

    199 parts33GPL-3.0

Questions

How big is the Schem PCB?

It measures 129.8 × 67.5 mm and has 2 copper layers, 2.5 mm thick.

What parts does the Schem use?

180 parts, built around the B350B, LD1117, LF33CDT-TR and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Schem KiCad files?

From the SullivanAtl/cpld_bike_driver repository on GitHub, at the commit this page was made from: the board is board/schem/schem.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Schem design in my own project?

Its repository states no licence, so its author keeps all rights: ask SullivanAtl before reusing the design.