2 layers74 × 40.5 mm
2 layers90 × 108 mm
MotorCtrl3
Kreyl/nuteAutomatically exported from code.google.com/p/nute
- Size
- 90 × 108 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 279
- Nets
- 172
- Pads
- 966
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 3
- Created
- 5 Jul 2015
- Updated
- 5 Jul 2015
Overview
MotorCtrl3 is an open-source printed circuit board by Kreyl, from the Kreyl/nute repository on GitHub. It is a 2-layer board of 90 × 108 mm with 279 parts on 172 nets.
It is built around the LMV358, BC817 and MMBT2222, with the IRLML9303, IRF7425 and NCP583SQ28 among its other parts. Its parts include 98 capacitors, 64 resistors, 20 diodes, 14 transistors and 4 ICs. It belongs with the STM32 boards of this library.
Main components
8
LMV358
SOP-8-40℃~+125℃ 10pA 10pA 1MHz 2 2.5V~5.5V 20mA 20nV/√Hz@10kHz 2uV/℃ 40uA 5mV 600V/ms 65dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSTECH PUBLICOperational Amplifier
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)MMBT2222
SOT-231 NPN 1uA 300mV 300mW 400 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSYONGYUTAIBipolar (BJT)IRLML9303
SOT-23MOSFETsLeiditechIRF7425
SOP-8MOSFETsTECH PUBLIC
NCP583SQ28
SC-82AB-40℃~+85℃@(Ta) 1 150mA 1uA 2.8V 250mV@(150mA) 6V Enable Fixed Positive SC-82AB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLD1117
UncategorisedSTMicroelectronics
M24C04-BN6
PDIP-8PDIP-8 EEPROM ROHSSTMicroelectronicsEEPROM
Parts
279| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 0.1u | CAP_0603 | C2, C3, C4, C10, C11, C14, C17, C21, C25, C26, C27, C28, C31, C32, C44, C45 +10 |
| 25 | TESTPOINT | TESTPOINT_1MM | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +9 |
| 16 | 0.1u/50v | CAP_0603 | C59, C60, C61, C62, C70, C71, C72, C73, C74, C75, C76, C77, C78, C79, C80, C81 |
| 14 | HOLE_METALLED | Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4, HOLE5, HOLE6, HOLE7, HOLE8, HOLE9, HOLE10, HOLE11, HOLE12, HOLE13, HOLE14 |
| 12 | 100p | CAP_0603 | C29, C30, C33, C38, C39, C40, C41, C42, C43, C50, C51, C52 |
| 12 | 1N4148 | DIODE_SOD80C | D7, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 |
| 12 | 39K | RES_0603 | R16, R17, R18, R25, R26, R27, R28, R29, R30, R31, R32, R33 |
| 11 | 1k | RES_0603 | R9, R10, R13, R15, R43, R47, R48, R51, R52, R60, R62 |
| 9 | 510R | RES_0603 | R6, R11, R12, R19, R20, R21, R22, R23, R24 |
| 8 | 10k | RES_0603 | R4, R8, R14, R42, R45, R46, R57, R58 |
| 8 | LED | LED0603 | D1, D2, D3, D4, D5, D6, D8, D9 |
| 7 | 10n | CAP_0603 | C1, C91, C92, C94, C95, C96, C97 |
| 7 | CONN_2 | CONN_PLS-2 | XL6, XL7, XL8, XL9, XL14, XL17, XL19 |
| 6 | 4k7 | RES_0603 | R35, R37, R39, R41, R49, R50 |
| 5 | 4u7 | CAP_0603 | C6, C7, C20, C85, C87 |
| 5 | CONN_4 | MINIFIT_4 | XL21, XL23, XL24, XL25, XL26 |
| 4 | 100u/63v | CAP_06xxR | C69, C82, C83, C84 |
| 4 | 10n/50v | CAP_1206 | C37, C64, C66, C68 |
| 4 | 10u | CAP_0805 | C34, C53, C55, C57 |
| 4 | 1u | CAP_0603 | C15, C19, C22, C89 |
| 4 | 220n/16v | CAP_0603 | C36, C63, C65, C67 |
| 4 | 33k | RES_0603 | R34, R36, R38, R40 |
| 4 | 4u7/63v | CAP_05xxR | C35, C54, C56, C58 |
| 4 | BC817 | SOT23 | Q9, Q10, Q11, Q12 |
| 4 | CONN_4X2 | CONN_DIL2X4 | XL10, XL11, XL12, XL13 |
| 4 | L6470 | HTSSOP28 | U1, U2, U3, U4 |
| 4 | MMBT2222 | SOT23 | Q2, Q4, Q6, Q8 |
| 3 | 1n | CAP_0603 | C12, C16, C88 |
| 3 | IRLML9303 | SOT23 | Q3, Q5, Q7 |
| 2 | 100k | RES_0603 | R55, R56 |
| 2 | 2.2u | CAP_0603 | C23, C24 |
| 2 | 22R | RES_0603 | R2, R5 |
| 2 | 27pF | CAP_0603 | C13, C18 |
| 2 | 2k7 | RES_0603 | R63, R64 |
| 2 | 47k | RES_0603 | R59, R61 |
| 2 | 5R1 | RES_0603 | R53, R54 |
| 2 | CONN_8 | CONN_DIL2X4 | XL16, XL18 |
| 2 | IRF7425 | SO8HEATSINK | Q13, Q14 |
| 2 | NCP583SQ | SC82AB | DA3, DA4 |
| 2 | TLV700XX | SOT23-5 | DA1, DA5 |
| 1 | 10K | RES_0603 | R7 |
| 1 | 10uH | IND_0805 | L1 |
| 1 | 2k | RES_0603 | R44 |
| 1 | 4u7 | CAP_0805 | C8 |
| 1 | 510 | RES_0603 | R3 |
| 1 | 512K | RES_0603 | R1 |
| 1 | 8MHz | CRYSTAL_0503x4-4 | XTAL1 |
| 1 | BUTTON | BUTTON_6x6SMD | SW1 |
| 1 | BUZZER | BUZZER_HC0903 | BZ1 |
| 1 | CONN_3 | CONN_PLS-3 | XL4 |
| 1 | CONN_4X2 | MINIFIT_8 | XL2 |
| 1 | CONN_5 | CONN_PLS-5 | XL15 |
| 1 | CONN_6 | MINIFIT_6 | XL20 |
| 1 | CONN_MICROSD | MICROSD_CAP_FIX05A | XL22 |
| 1 | CONN_NOKIA_LCD24 | CONN_NOKIA_24_04 | XL3 |
| 1 | FUSE0R | SMD0603_FUSE | F1 |
| 1 | LD1117 | SOT223 | DA2 |
| 1 | LM4041 | SOT23 | DA6 |
| 1 | LMV358 | SO8E | DA7 |
| 1 | M24C04 | SO8E | DD2 |
| 1 | STM32F407VX-100 | LQFP100 | DD1 |
| 1 | ST_SWD | CONN_PLS-4 | XL5 |
| 1 | USBLC6_2XX | SOT23-6 | Q1 |
| 1 | USB_B | CONN_USB_B | XL1 |
More from Kreyl/nute
12- 2 layers110 × 23 mm
- 2 layers49 × 66 mm
- 2 layers45 × 45 mm
- 2 layers194.4 × 13.6 mm
- 2 layers50 × 57 mm
- 2 layers230 × 33 mm
- 2 layers133.6 × 13.8 mm
- 2 layers99.9 × 24 mm
- 2 layers52.2 × 25 mm
- 2 layers39 × 72 mm
- 2 layers42 × 42 mm
Similar boards
- 2 layers109 × 64 mm
- 2 layers87.5 × 42.4 mm
- 2 layers
- 2 layers41.6 × 38.4 mm
- 2 layers46 × 103 mm
- 2 layers30 × 103 mm
- 2 layers42 × 24 mm
- 2 layers24.6 × 10.4 mm
Questions
How big is the MotorCtrl3 PCB?
It measures 90 × 108 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MotorCtrl3 use?
279 parts, built around the LMV358, BC817, MMBT2222 and IRLML9303. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MotorCtrl3 KiCad files?
From the Kreyl/nute repository on GitHub, at the commit this page was made from: the board is HandyDevices/MotorControl/MotorControl3_hw/MotorCtrl3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MotorCtrl3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.