Skip to the content
2 layers73.7 × 63.5 mmTraffic light, the printed circuit board in 3D

This repository documents my hands-on journey into Embedded Systems and Firmware Engineering

Size
73.7 × 63.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
39
Pads
54
Tracks, vias
12, 0
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
20 Jun 2026
Updated
1 Jul 2026

Overview

Traffic light is an open-source printed circuit board by BDeuDev, from the BDeuDev/esp32-practice-c repository on GitHub. It is a 2-layer board of 73.7 × 63.5 mm with 9 parts on 39 nets, routed with 12 tracks and 0 vias.

Its parts include 3 resistors, 3 diodes and 2 connectors.

README

README.md

ESP32 Learning Journey

This repository documents my hands-on journey into Embedded Systems and Firmware Engineering using the ESP32 and ESP-IDF with The C Programming Language.

The goal is to learn by building. Each project focuses on a specific concept, peripheral, or embedded programming technique while improving my understanding of electronics, real-time systems, hardware debugging, and firmware development.

Rather than creating production-ready applications, this repository serves as a collection of experiments, exercises, and practical projects that help me develop embedded engineering skills.

What I'm Learning

  • GPIO and Digital Electronics
  • FreeRTOS
  • Timers and Scheduling
  • Interrupts
  • UART, SPI, and I2C
  • PWM, ADC, and DAC
  • Sensors and Actuators
  • Wi-Fi and Bluetooth
  • Hardware Debugging
  • PCB Design with KiCad
  • ESP-IDF Development

Repository Structure

mermaid
graph TD
    ROOT[ESP32 Learning Journey]

    ROOT --> BLINK[01_blink]
    ROOT --> TRAFFIC[02_traffic_light]
    ROOT --> BUTTON[03_button]
    ROOT --> PWM[04_pwm_led]
    ROOT --> ADC[05_adc_potentiometer]

    BLINK --> BLINK_README[README.md]
    BLINK --> BLINK_FW[firmware]
    BLINK --> BLINK_HW[hardware]

    TRAFFIC --> TRAFFIC_README[README.md]
    TRAFFIC --> TRAFFIC_FW[firmware]
    TRAFFIC --> TRAFFIC_HW[hardware]

    BUTTON --> BUTTON_README[README.md]
    BUTTON --> BUTTON_FW[firmware]
    BUTTON --> BUTTON_HW[hardware]

    PWM --> PWM_README[README.md]
    PWM --> PWM_FW[firmware]
    PWM --> PWM_HW[hardware]

Projects

ProjectConcept
01 - BlinkBasic GPIO output and ESP-IDF project structure
02 - Traffic LightMultiple GPIO outputs and timing control
03 - ButtonGPIO input, ISR and IRAM attr
04 - PWM LEDPWM (Pulse Width Modulation)
05 - ADC PotentiometerADC (Analog-to-Digital Conversion)

Why This Repository Exists

I created this repository to:

  • Track my progress in embedded development.
  • Document what I learn while working with ESP32 devices.
  • Practice firmware engineering concepts through real projects.
  • Build a portfolio that reflects my growth as an embedded developer.
  • Create a reference for future projects.

Parts

9
QtyValueFootprintReferences
3220Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2, R3
2Conn_01x19_SocketConnector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_VerticalJ1, J2
1BatteryBattery:BatteryHolder_Keystone_2462_2xAABT1
1LED_GREENLED_THT:LED_D3.0mmD3
1LED_REDLED_THT:LED_D3.0mmD1
1LED_YELLOWLED_THT:LED_D3.0mmD2

More from BDeuDev/esp32-practice-c

3
  • 2 layers74.9 × 53.3 mmAdc potentiometer, the printed circuit board in 3D

    Adc potentiometer

    BDeuDev/esp32-practice-c

    This repository documents my hands-on journey into Embedded Systems and Firmware Engineering

    12 parts
  • 2 layers71.1 × 62.2 mmBlink, the printed circuit board in 3D

    Blink

    BDeuDev/esp32-practice-c

    This repository documents my hands-on journey into Embedded Systems and Firmware Engineering

    5 parts
  • 2 layers67.3 × 62.2 mmButton, the printed circuit board in 3D

    Button

    BDeuDev/esp32-practice-c

    This repository documents my hands-on journey into Embedded Systems and Firmware Engineering

    5 parts

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the Traffic light PCB?

It measures 73.7 × 63.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Traffic light use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Traffic light KiCad files?

From the BDeuDev/esp32-practice-c repository on GitHub, at the commit this page was made from: the board is 02_traffic_light/hardware/traffic-light.kicad_pcb and its schematic 01_blink/hardware/blink.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Traffic light design in my own project?

Its repository states no licence, so its author keeps all rights: ask BDeuDev before reusing the design.