4 layers91 × 53.1 mm
Nff pcb
o7-machinehum/flipper-blackhat
Linux based WiFi pentesting device for the Flipper Zero.
184 parts300
2 layers35 × 18 mm
Esp8266-usb programmer
bauertronix/esp01-usb-programmer4small compact usb programmer for ESP8266-01
- Size
- 35 × 18 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 23
- Pads
- 59
- Tracks, vias
- 99, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Oct 2018
- Updated
- 14 Oct 2018
Overview
Esp8266-usb programmer is an open-source printed circuit board by bauertronix, from the bauertronix/esp01-usb-programmer repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 35 × 18 mm with 17 parts on 23 nets, routed with 99 tracks and 6 vias.
It is built around the CH340C. Its parts include 5 capacitors, 3 resistors, 3 ICs, 2 transistors and 1 diode. It belongs with the interfaces and adapters boards and the ESP8266 boards of this library.
Main components
1README
README.mdUSB Programmer for ESP8266-01
Small, compact usb programmer for ESP8266-01. Open hardware project designed with KiCAD, assembled in Brazil.
Schematics
See it in action!
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 2.2uF | Capacitors_SMD:C_0805 | C1, C2, C5 |
| 2 | 12K | Resistors_SMD:R_0805 | R3, R4 |
| 2 | S8050-SOT23 | TO_SOT_Packages_SMD:TSOT-23 | Q1, Q2 |
| 1 | 100nF | Capacitors_SMD:C_0805 | C3 |
| 1 | 10nF | Capacitors_SMD:C_0805 | C4 |
| 1 | 1K | Resistors_SMD:R_0805 | R1 |
| 1 | 662K LDO SOT23 | TO_SOT_Packages_SMD:SOT-23 | U3 |
| 1 | CH340C | SMD_Packages:SO-16-N | U2 |
| 1 | D1 | LEDs:LED_1206 | D1 |
| 1 | ESP-01v090 | ESP-01 | U1 |
| 1 | LOGO | logos:bauerslogo5x5 | G*** |
| 1 | LOGO | logos:bauerslogo12x12 | G*** |
| 1 | USB_A | usb-conn:USB_A_PCB | J1 |
Questions
How big is the Esp8266-usb programmer PCB?
It measures 35 × 18 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp8266-usb programmer use?
17 parts, built around the CH340C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp8266-usb programmer KiCad files?
From the bauertronix/esp01-usb-programmer repository on GitHub, at the commit this page was made from: the board is esp8266-usb-programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp8266-usb programmer design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers66.8 × 34 mm
- 2 layers13.7 × 21.4 mm
- 2 layers192.4 × 50 mm
- 2 layers84.2 × 52 mm
- 4 layers43 × 49 mm
- 2 layers36 × 58 mm
Ups adaptor
aronreid/ups-to-esp32
Put a USB-only UPS on the network: an ESP32-S3 board and firmware that serves NUT on TCP 3493, with a web UI. No host computer, no Raspberry Pi.
38 parts130GPL-3.0 - 2 layers85 × 56 mm
