2 layers68.8 × 53.6 mm
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
46 parts269
2 layers46.2 × 29.5 mm
BLUB USB to TWI
bastli/BLUB1- Size
- 46.2 × 29.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 15
- Pads
- 90
- Tracks, vias
- 228, 16
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 16 Oct 2013
- Updated
- 26 Sep 2014
Overview
BLUB USB to TWI is an open-source printed circuit board by bastli, from the bastli/BLUB repository on GitHub. It is a 2-layer board of 46.2 × 29.5 mm with 20 parts on 15 nets, routed with 228 tracks and 16 vias.
It is built around the FT232RL. Its parts include 7 connectors, 5 resistors, 4 capacitors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdParts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SCREWWHOLE_M3 | SCREWWHOLE_M3 | P2, P3, P4, P5 |
| 3 | 100n | SM0603_Capa | C2, C3, C4 |
| 2 | 270 | SM0603 | R4, R5 |
| 2 | 2k | SM0603 | R2, R3 |
| 1 | 4u7 | c_elec_4x5.7 | C1 |
| 1 | ATTINY2313-S | tmc-SOIC20 | IC1 |
| 1 | AVR-ISP-6 | pin_array_3x2 | CON1 |
| 1 | FT232RL | SSOP28 | U1 |
| 1 | LED_RX | LED-3MM | D2 |
| 1 | LED_TX | LED-3MM | D1 |
| 1 | R | SM0603 | R1 |
| 1 | TWI | PIN_ARRAY_4x1 | P1 |
| 1 | USB | USB_B | J1 |
Questions
How big is the BLUB USB to TWI PCB?
It measures 46.2 × 29.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BLUB USB to TWI use?
20 parts, built around the FT232RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BLUB USB to TWI KiCad files?
From the bastli/BLUB repository on GitHub, at the commit this page was made from: the board is firmware/BLUB USB to TWI firmware/BLUB USB to TWI.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BLUB USB to TWI design in my own project?
Its repository states no licence, so its author keeps all rights: ask bastli before reusing the design.
Similar boards
- 2 layers80.1 × 56.9 mm
- 2 layers45 × 69 mm
- 2 layers100 × 71.8 mm
- 2 layers132.5 × 38 mm
Emfi
Ledger-Donjon/silicon-toaster
SiliconToaster is an open-source hardware electromagnetic fault injection device, designed for hardware security research. It has the following features:
81 parts60LGPL-3.0 - 2 layers22 × 66.5 mm
- 2 layers104.7 × 55.6 mm
Lab1
jsjolund/dmx512-controller-board
Controller board for DMX512 compatible devices, built around the STM32F4 processor
96 parts26 - 2 layers95 × 85 mm
