

- Size
- 40 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 12
- Pads
- 42
- Tracks, vias
- 82, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
Xnet is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 40 × 30 mm with 12 parts on 12 nets, routed with 82 tracks and 4 vias.
It is built around the MAX485ED. Its parts include 4 resistors, 3 connectors, 1 capacitor and 1 IC.
Main components
1Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R401, R402, R403 |
| 2 | RJ12 | Connector_RJ:RJ12_Amphenol_54601 | J401, J402 |
| 1 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C401 |
| 1 | 120R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R404 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J403 |
| 1 | LOGO | kicad_images:Train-Science logo small | G*** |
| 1 | MAX485E | Package_DIP:DIP-8_W7.62mm | U401 |
The 10 most common of 12 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 2 layers63 × 46 mm

Pi485
bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino
31 parts41MIT - 2 layers150 × 50 mm

- 4 layers96 × 172 mm

- 2 layers60 × 30 mm

Scoring table hardware
GrappleRobotics/JMS
Another alternative field management system for the FIRST Robotics Competition.
30 parts18 - 2 layers68.6 × 53.3 mm

XyloShield
StefanKrupop/XyloShield
Shield for Arduino that hosts a RFM26W radio module and allows DMX-512 connectivity
19 parts17 - 2 layers257.1 × 166.2 mm

PiccoloBlack2021 14juillet v8sansMasse
SylvainVanIniitu/Piccolo-4C-Black
Piccolo MIDI stochastic sequencer
102 parts16 - 2 layers65 × 56.5 mm

Pool pi v1.1
ChaseDurand/Pool-Pi
Hardware+software solution for controlling a Goldline/Hayward Aqualogic pool control board over WiFi via a Raspberry Pi.
28 parts14 - 2 layers53 × 68.7 mm

EEC IV Reader
flxkrmr/eec-iv-reader-arduino
Arduino based diagnostics-tool for Fords EEC IV ECUs
39 parts14GPL-3.0
Questions
How big is the Xnet PCB?
It measures 40 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Xnet use?
12 parts, built around the MAX485ED. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xnet KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/Arduino_Interfaces_Lnet_Xnet_DCC/Xnet/Xnet.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xnet design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.