

Main board schematic
Truely custom keyboard - a keyboard made entirely from scratch
- Size
- 434.6 × 125.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 262
- Nets
- 160
- Pads
- 952
- Tracks, vias
- 1,493, 93
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Nov 2022
- Updated
- 14 Dec 2023
Overview
Main board schematic is an open-source printed circuit board by bartlomiej-stefanski, from the bartlomiej-stefanski/The-Keyboard-Project repository on GitHub, published under the MIT licence. It is a 2-layer board of 434.6 × 125.1 mm with 262 parts on 160 nets, routed with 1,493 tracks and 93 vias.
It is built around the RP2040, W25Q128JVSIQ and 1N4448WT. Its parts include 109 diodes, 16 capacitors, 9 resistors, 8 switches and 6 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH1N4448WT
SOD-523(SC-79)-55℃~+150℃@(Tj) 1.25V@150mA 100V 150mW 2.5uA@75V 250mA 4ns Independent SOD-523(SC-79) Switching Diodes ROHSYangzhou Yangjie Electronic TechnologySwitching Diodes
README
README.mdThe Keyboard Project
Documentation can be found here:
Notion - The Keyboard Project
Parts
262| Qty | Value | Footprint | References |
|---|---|---|---|
| 108 | 1N4448WT | Diode_SMD:D_SOD-523 | D1, D10, D11, D12, D13, D14, D15, D100, D101, D102, D103, D104, D105, D106, D107, D108 +92 |
| 98 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1u | MX1, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX100, MX104, MX105, MX106, MX107, MX108 +82 |
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C5, C6, C7, C8, C9, C10, C17 |
| 7 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1.25u | MX50, MX51, MX52, MX54, MX101, MX102, MX103 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J5 |
| 4 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2u | S3, S4, S7, S8 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R8 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R7 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 27.4 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 27p | Capacitor_SMD:C_0603_1608Metric | C11, C14 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | LOGO | 7-Dnie-spoznienia:logo | G***, G*** |
| 2 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1.5u | MX20, MX80 |
| 2 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2.25u | S2, S5 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 12MHZ | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D109 |
| 1 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1.75u | MX30 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_6.25u | S1 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2.75u | S6 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | P1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
Similar boards
- 4 layers60 × 60 mm

- 4 layers100 × 100 mm

- 4 layers115 × 140 mm

- 4 layers53.5 × 65.5 mm

ChipigniteExplain
efabless/chipignite_discover
This FPGA experimentation and development board was developped for efabless chipignite workshops and labs to serve as an easy to use experimentation board and stepping stone towards ASIC digital design, allowing for…
251 parts2Apache-2.0 - 4 layers50 × 100 mm

Trek Box
tuanthanhhh/trek-safety-system
The system continuously monitors user status and environment, detects abnormal conditions (e.g., fall or unconsciousness), and transmits alerts to a central monitoring station via LoRa communication.
131 parts - 4 layers134 × 140 mm

- 4 layers45 × 52.5 mm

- 2 layers42 × 67 mm

Questions
How big is the Main board schematic PCB?
It measures 434.6 × 125.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Main board schematic use?
262 parts, built around the RP2040, W25Q128JVSIQ and 1N4448WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main board schematic KiCad files?
From the bartlomiej-stefanski/The-Keyboard-Project repository on GitHub, at the commit this page was made from: the board is PCB/main_board/main_board_schematic/main_board_schematic.kicad_pcb and its schematic PCB/Switch_matrix/switch_matrix_schematic/switch_matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main board schematic design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).