Skip to the content
2 layers93.2 × 64.1 mmGd protoboard pcb, the printed circuit board in 3D

Gd protoboard pcb

baldengineer/Mega-IIe33

Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

Size
93.2 × 64.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
121
Nets
49
Pads
603
Tracks, vias
269, 12
Pours
25
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
15 May 2021
Updated
8 Aug 2024

Overview

Gd protoboard pcb is an open-source printed circuit board by baldengineer, from the baldengineer/Mega-IIe repository on GitHub, published under the MIT licence. It is a 2-layer board of 93.2 × 64.1 mm with 121 parts on 49 nets, routed with 269 tracks and 12 vias.

It is built around the L7905. Its parts include 105 connectors, 6 capacitors, 4 resistors, 4 diodes and 1 IC.

Main components

1

README

kicad files/gd power supply board pcb/README.md

3d render of rev2 power supply board

Four-rail SMPS for the Mega IIe.

  • Always-on 5V supply for the RP2040s and USB
  • Switchable 5V for MEGA and other 5V Logic
  • Switchable +12/-12V for disk drive and slot

Each 5V supply is designed for >1 Amp. The 12V supply was intended to provide at least 1 Amp. In rev1 testing it could provide 1 amp, but only for about 2 minutes. It's steady state max was around 750 mA.

The -12V supply can only provide a few hundred milliamps. However, in my testing other the analog video circuit used it. At most, it would draw 50 mA but usually sat around 10 mA.

The rev1 design suffered from severe conducted ripple from the 5V switchers. So the rev2 re-design is a 4-layer board with significant ground shielding of input and output rails.

Parts

121
QtyValueFootprintReferences
64Conn_01x04My Libraries:HoleField_1x05_P2.54mmJ13, J13, J13, J13, J13, J13, J13, J13, J13, J13, J13, J13, J13, J13, J13, J13 +48
32Conn_01x04My Libraries:HoleField_1x04_P2.54mmJ8, J8, J8, J8, J8, J8, J8, J8, J8, J8, J8, J8, J8, J8, J8, J8 +16
410uCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4
41kResistor_SMD:R_0805_2012MetricR1, R2, R3, R4
21uCapacitor_SMD:C_0805_2012MetricC5, C6
1+12vLED_SMD:LED_1206_3216MetricD3
1+5vLED_SMD:LED_1206_3216MetricD2
1-12vLED_SMD:LED_1206_3216MetricD1
1-5V InConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ5
1-5vLED_SMD:LED_1206_3216MetricD4
1Addr_Main_DataConnector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_HorizontalJ3
1Addr_Main_DataConnector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_VerticalJ8
1CTRL1Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ9
1CTRL1Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_HorizontalJ4
1CTRL2Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ7
1CTRL2Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_HorizontalJ2
1G***My Libraries:BE5v2svg2mod
1L7905Package_TO_SOT_THT:TO-220-3_VerticalU1
1PWRConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_HorizontalJ1
1PWRConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ6

More from baldengineer/Mega-IIe

12
  • 4 layers163 × 174.4 mmGd rev3b, the printed circuit board in 3D

    Gd rev3b

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    440 parts33MIT
  • 4 layers135.2 × 46.8 mmGd power supply board pcb, the printed circuit board in 3D

    Gd power supply board pcb

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    161 parts33MIT
  • 2 layers86.9 × 40.1 mmGd power supply board pcb, the printed circuit board in 3D

    Gd power supply board pcb

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    129 parts33MIT
  • 4 layers114.3 × 73.7 mmGd VGC proto pcb, the printed circuit board in 3D

    Gd VGC proto pcb

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    121 parts33MIT
  • 4 layers88.1 × 34.5 mmServid rp2040-hdmi proto rev1, the printed circuit board in 3D

    Servid rp2040-hdmi proto rev1

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    105 parts33MIT
  • 2 layers79.2 × 49.5 mmGd rp2040 keyboard proto pcb, the printed circuit board in 3D

    Gd rp2040 keyboard proto pcb

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    90 parts33MIT
  • 2 layers37.1 × 63.8 mmGd vga pico proto pcb, the printed circuit board in 3D

    Gd vga pico proto pcb

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    74 parts33MIT
  • 2 layers106.9 × 65.4 mmGd IWM proto pcb old design, the printed circuit board in 3D

    Gd IWM proto pcb old design

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    66 parts33MIT
  • 4 layers98.8 × 115.3 mmGd MegaII proto pcb, the printed circuit board in 3D

    Gd MegaII proto pcb

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    63 parts33MIT
  • 2 layers93.2 × 54.7 mmGd IWM proto pcb, the printed circuit board in 3D

    Gd IWM proto pcb

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    60 parts33MIT
  • 4 layers98.8 × 99.9 mmGd MEGA-65c02 proto pcb, the printed circuit board in 3D

    Gd MEGA-65c02 proto pcb

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    60 parts33MIT
  • 4 layers90.4 × 52.2 mmGd 6502 proto pcb, the printed circuit board in 3D

    Gd 6502 proto pcb

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    44 parts33MIT

Similar boards

  • 2 layers164.7 × 58.4 mmDISAppointment, the printed circuit board in 3D

    DISAppointment

    rasteri/dISAppointment

    Adding ISA slots to modern motherboards

    71 parts241CC-BY-SA-4.0
  • 2 layers285 × 222.5 mmPolykit x mainboard, the printed circuit board in 3D

    Polykit x mainboard

    polykit/polykit-x-mainboard

    Schematics and PCB layout for a mainboard for an 8 voice polyphonic synthesizer

    220 parts22
  • 2 layers80 × 60 mmSgikbd, the printed circuit board in 3D

    Sgikbd

    jtsiomb/sgikbd

    PS/2 keyboard/mouse converter for old Silicon Graphics computers.

    35 parts20GPL-3.0
  • 2 layers140 × 75 mmAWG, the printed circuit board in 3D

    AWG

    F6ITU/AWG

    poor man's function generator

    81 parts14
  • 4 layers54.4 × 34.8 mmPICO AT, the printed circuit board in 3D

    PICO AT

    wiretap-retro/PICO-AT-Power-Adapter-softpower

    A version of the regular PICO-AT adapter, but with momentary power switch support.

    16 parts7
  • 2 layers99.1 × 66 mmAgatSpeechBoard, the printed circuit board in 3D

    AgatSpeechBoard

    sintech/AgatSpeechBoard

    КР1803ВЖ1 (TMS5100) based speech synthesizer for Agat computer

    31 parts5MIT
  • 2 layers98 × 98 mmVCDO, the printed circuit board in 3D

    VCDO

    Sonosus/VCDO

    A Kosmo oscillator module that uses the Electric Druid VCDO chip.

    93 parts4CC-BY-SA-4.0

Questions

How big is the Gd protoboard pcb PCB?

It measures 93.2 × 64.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Gd protoboard pcb use?

121 parts, built around the L7905. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gd protoboard pcb KiCad files?

From the baldengineer/Mega-IIe repository on GitHub, at the commit this page was made from: the board is kicad files/gd protoboard pcb/gd protoboard pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gd protoboard pcb design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).