Skip to the content
2 layers304.8 × 115.9 mmMy keyboard, the printed circuit board in 3D

Custom mechanical keyboard PCB

Size
304.8 × 115.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
171
Nets
117
Pads
620
Tracks, vias
775, 49
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20200819)
Created
6 Apr 2020
Updated
13 Dec 2020

Overview

My keyboard is an open-source printed circuit board by bagnaram, from the bagnaram/my-keyboard repository on GitHub. It is a 2-layer board of 304.8 × 115.9 mm with 171 parts on 117 nets, routed with 775 tracks and 49 vias.

It is built around the ATMEGA32U4-AU. Its parts include 69 diodes, 7 capacitors, 7 resistors, 1 IC and 1 switch. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

171
QtyValueFootprintReferences
67D_SmallDiode_SMD:D_SOD-123D1, D2, D10, D11, D13, D14, D15, D16, D17, D19, D20, D21, D22, D24, D25, D26 +51
541MX_Alps_Hybrid:MX-1U-NoLEDMX0, MX1, MX2, MX10, MX11, MX12, MX14, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX24 +38
51MX_Alps_Hybrid:MX-1.25U-NoLEDMX58, MX59, MX60, MX62, MX63
30.1uCapacitor_SMD:C_0805_2012MetricC1, C2, C3
21MX_Alps_Hybrid:MX-2.25U-NoLEDMX42, MX44
21MX_Alps_Hybrid:MX-1.5U-NoLEDMX15, MX28
210kResistor_SMD:R_0805_2012MetricR3, R4
222Resistor_SMD:R_0805_2012MetricR1, R2
222pCapacitor_SMD:C_0805_2012MetricC5, C6
23.6VDiode_SMD:D_SOD-123D86, D87
25.1kResistor_SMD:R_0805_2012MetricR5, R6
11MX_Alps_Hybrid:MX-6.25U-ReversedStabilizers-NoLEDMX61
11MX_Alps_Hybrid:MX-1.75U-NoLEDMX55
11MX_Alps_Hybrid:MX-1.75UMX30
11MX_Alps_Hybrid:MX-2U-NoLEDMX13
11.5kResistor_SMD:R_0805_2012MetricR7
110uCapacitor_SMD:C_0805_2012MetricC4
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11uCapacitor_SMD:C_0805_2012MetricC7
1500mAcftkb:polyfuse_5.1mmF1
1ATmega32U4-AUPackage_QFP:TQFP-44_10x10mm_P0.8mmU1
1AVR-ISP-6cftkb:AVR_ICSP_3x2ISP1
1KiCad-Logo_5mm_SilkScreenSymbol:KiCad-Logo_5mm_SilkScreenSYM5
1LOGOcftkb:DISCIPLINE_SMALL_MASKG***
1OSHW-Logo2_14.6x12mm_SilkScreenSymbol:OSHW-Logo2_14.6x12mm_SilkScreenSYM4
1SW_PushRandom Keyboard Parts:SKQG-1155865SW1
1Symbol_CC-Attribution_CopperTop_SmallSymbol:Symbol_CC-Attribution_CopperTop_SmallSYM2
1Symbol_CC-ShareAlike_CopperTop_SmallSymbol:Symbol_CC-ShareAlike_CopperTop_SmallSYM3
1Symbol_CreativeCommons_CopperTop_Type2_SmallSymbol:Symbol_CreativeCommons_CopperTop_Type2_SmallSYM1
1Wurth-632723300011Type-C:Wurth-632723300011USB1

The 162 most common of 171 parts.

Similar boards

  • 2 layers243.2 × 106 mm3W6, the printed circuit board in 3D

    3W6

    weteor/3W6

    a small compact 3x5+3 split ortho keyboard

    113 parts488
  • 2 layers228.4 × 85 mmLeChiffre, the printed circuit board in 3D

    LeChiffre

    tominabox1/Le-Chiffre-Keyboard

    Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com

    105 parts183GPL-3.0
  • 2 layers228.6 × 76.8 mmSchwann Rev0.5b, the printed circuit board in 3D

    Schwann Rev0.5b

    The-Royal/The_Royal_Open-Source-Projects

    A Master Repository For All things Royal Made

    127 parts159MIT
  • 2 layers30 × 65 mmKeyboard mcu, the printed circuit board in 3D

    Keyboard mcu

    dpapavas/lagrange-keyboard

    A configurable, handwired, ergonomic keyboard

    26 parts137AGPL-3.0
  • 2 layers88.4 × 80 mmLHS Controller PCB, the printed circuit board in 3D

    LHS Controller PCB

    dmcke5/ZenDeck

    This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.

    76 parts133CERN-OHL-S-2.0
  • 2 layers259.5 × 89.1 mmSteno, the printed circuit board in 3D

    Steno

    crides/steno

    Embedded steno firmware + custom steno PCBs

    61 parts75MIT
  • 2 layers99.1 × 99.1 mmPower supply panelized, the printed circuit board in 3D

    Power supply panelized

    thebiguno/microcontroller-projects

    A home for a bunch of microcontroller projects which don't warrant their own repos.

    223 parts75
  • 2 layers323.9 × 95.1 mmUnSplit, the printed circuit board in 3D

    UnSplit

    swiftrax/UnSplit

    Ergo 40% mechanical keyboard with all components on the top with diodes arranged in an array

    110 parts68GPL-2.0

Questions

How big is the My keyboard PCB?

It measures 304.8 × 115.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the My keyboard use?

171 parts, built around the ATMEGA32U4-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the My keyboard KiCad files?

From the bagnaram/my-keyboard repository on GitHub, at the commit this page was made from: the board is my-keyboard.kicad_pcb and its schematic my-keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the My keyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask bagnaram before reusing the design.