2 layers84.5 × 43.3 mm
2 layers150 × 137.2 mm
WICCON-2024-SAO Nametag
badgeteam/WICCON2024-hardware1Badge for WICCON 2024
- Size
- 150 × 137.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 39
- Pads
- 160
- Tracks, vias
- 278, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Aug 2024
- Updated
- 2 Oct 2024
Overview
WICCON-2024-SAO Nametag is an open-source printed circuit board by badgeteam, from the badgeteam/WICCON2024-hardware repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 150 × 137.2 mm with 49 parts on 39 nets, routed with 278 tracks and 16 vias.
It is built around the QX2303L33E. Its parts include 17 resistors, 16 connectors, 4 capacitors, 2 diodes and 1 IC.
Main components
1README
README.mdBadge for WICCON 2024
Consists of two boards: one is a cat that keeps your addons safe, miauw.
The other board is a SAO showing your "Social battery".
License
These hardware designs may be used under the terms of the CERN-OHL-P license.
The Badge.Team mascots logo is all rights reserved and may not be reproduced.
Authors
- Wietse Boonstra
- Renze Nicolai
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 4.7k | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 8 | SAO | Library:PinSocket_2x03_P2.54mm_Vertical_nosilk | J1, J2, J3, J4, J5, J6, J7, J8 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C2, C4 |
| 2 | ~ | MountingHole:MountingHole_6mm | H1, H2 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 47u | Library:IND-SMD_L5.0-W5.0 | L1 |
| 1 | Battery | Library:BAT-TH_BH-BH-AAA-A1AJ020 | BT1 |
| 1 | MOD1 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J9 |
| 1 | MOD2 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J10 |
| 1 | MOD3 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J11 |
| 1 | MOD4 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J12 |
| 1 | MOD5 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J13 |
| 1 | MOD6 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J14 |
| 1 | MOD7 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J15 |
| 1 | MOD8 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J16 |
| 1 | NameTag | Library:sao_nametag_holder | N1 |
| 1 | ON/OFF | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | QX2303L33E | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | RED LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Sjaan | Library:Chantal | N3 |
| 1 | badgeteam | Library:stamp | N2 |
| 1 | wicca | Library:full_wicca_logo | N4 |
More from badgeteam/WICCON2024-hardware
1Similar boards
- 4 layers79.7 × 139.5 mm
- 2 layers173 × 122.5 mm
- 2 layers85.1 × 49.8 mm
- 2 layers50 × 90 mm
- 2 layers126.4 × 15.2 mm
- 2 layers43 × 92.3 mm
DSKY driver
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
49 parts261MIT - 2 layers58 × 110 mm
- 2 layers61 × 42.5 mm
Questions
How big is the WICCON-2024-SAO Nametag PCB?
It measures 150 × 137.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WICCON-2024-SAO Nametag use?
49 parts, built around the QX2303L33E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WICCON-2024-SAO Nametag KiCad files?
From the badgeteam/WICCON2024-hardware repository on GitHub, at the commit this page was made from: the board is nametag_sao_holder/WICCON-2024-SAO-Nametag.kicad_pcb and its schematic nametag_sao_holder/WICCON-2024-SAO-Nametag.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WICCON-2024-SAO Nametag design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).