4 layers87 × 59.8 mm
4 layers53 × 63 mm
Mintest right
azonenberg/integralstick12STM32F7 + Artix-7 SoM
- Size
- 53 × 63 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 51
- Pads
- 224
- Tracks, vias
- 757, 79
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Aug 2018
- Updated
- 28 Nov 2019
Overview
Mintest right is an open-source printed circuit board by azonenberg, from the azonenberg/integralstick repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 53 × 63 mm with 22 parts on 51 nets, routed with 757 tracks and 79 vias.
Its parts include 7 resistors, 6 connectors, 4 capacitors and 1 diode.
README
README.mdintegralstick
STM32F7 + Artix-7 SoM
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C1, C2, C3, C4 |
| 4 | 1K | azonenberg_pcb:EIA_0402_RES_NOSILK | R1, R2, R4, R7 |
| 3 | PMOD_HOST | azonenberg_pcb:CONN_HEADER_2.54MM_2x6_RA_PMOD_HOST | J4, J5, J6 |
| 2 | 270 | azonenberg_pcb:EIA_0402_RES_NOSILK | R5, R6 |
| 1 | 470 | azonenberg_pcb:EIA_0402_RES_NOSILK | R3 |
| 1 | BEL_FUSE_0826-1G1T-23-F | azonenberg_pcb:CONN_BELFUSE_0826_1G1T_23_F | J3 |
| 1 | CONN_INTEGRALSTICK_MCU_HOST | azonenberg_pcb:CONN_SAMTEC_QSH-060-01-L-D-A | J1 |
| 1 | GREEN | azonenberg_pcb:EIA_0603_LED | D1 |
| 1 | LOGO | w_logo:Logo_silk_OSHW_6x6mm | G*** |
| 1 | LOGO | w_logo:Logo_silk_WEEE_3.4x5mm | G*** |
| 1 | LOGO | azonenberg_pcb:LONGTHING-1200DPI | G*** |
| 1 | LOGO | w_logo:Logo_silk_ROHS_5x2.8mm | G*** |
| 1 | XILINX_JTAG | azonenberg_pcb:XILINX_JTAG_PTH_MOLEX_0878311420 | J2 |
Questions
How big is the Mintest right PCB?
It measures 53 × 63 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Mintest right use?
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mintest right KiCad files?
From the azonenberg/integralstick repository on GitHub, at the commit this page was made from: the board is mintest-right/mintest-right.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mintest right design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from azonenberg/integralstick
3- 4 layers117 × 129.5 mm
- 4 layers45 × 63 mm
Similar boards
- 4 layers62.8 × 53.3 mm
- 4 layers91.5 × 65 mm
Spotmicro
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
22 parts915 - 4 layers113.3 × 64 mm
- 4 layers78.1 × 77.5 mm
- 4 layers65 × 51.5 mm
- 4 layers41.5 × 41.6 mm
RAM Module
ahmadexp/Open-Source-PC110
Figuring out the missing technical documentation of the beloved PC110
22 parts98 - 4 layers29 × 61 mm
Cfxsx
neggles/cfxsx
CFexpress to M.2 NVMe drive adapter. Intended for Xbox Series X and S, but untested.
22 parts69CC-BY-SA-4.0 - 4 layers
Tiav3 s14160
OpenSiPM/sipm-bias-control
Single channel silicon photomultipliers for high-speed fluorescence imaging
22 parts44