4 layers87 × 59.8 mm
4 layers117 × 129.5 mm
Host full
azonenberg/integralstick12STM32F7 + Artix-7 SoM
- Size
- 117 × 129.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 214
- Nets
- 251
- Pads
- 1,041
- Tracks, vias
- 4,154, 554
- Pours
- 22
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Aug 2018
- Updated
- 28 Nov 2019
Overview
Host full is an open-source printed circuit board by azonenberg, from the azonenberg/integralstick repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 117 × 129.5 mm with 214 parts on 251 nets, routed with 4,154 tracks and 554 vias.
It is built around the KSZ9031RNXCA, SC185EULTRT and ECS-1612MV-250-CN-TR, with the 0826-1G1T-23-F and NRS5030T1R0NMGJ among its other parts. Its parts include 89 capacitors, 54 resistors, 31 connectors, 11 inductors and 7 ICs.
Main components
5
KSZ9031RNXCA
QFN-48-EP(7x7)0℃~+70℃ 1.2V、1.8V、2.5V、3.3V 10BASE-T、100BASE-TX、1000BASE-T 10Mbit/s、100Mbit/s、1Gbit/s 4 PHY Transceiver RGMII QFN-48-EP(7x7) Ethernet Transceivers ROHSMicrochip TechnologyEthernet Transceivers
SC185EULTRT
MLPQ-16-UT(3x3)-40℃~+85℃@(TA) 1 1.2V 1.5MHz 2.9V~5.5V 4A Buck Buck Built-in Fixed Yes MLPQ-16-UT(3x3) DC-DC Converters ROHSSEMTECHDC-DC Converters
ECS-1612MV-250-CN-TR
SMD1612-4P-40℃~+85℃ 1.6V~3.63V 25MHz 5mA CMOS ±25ppm SMD1612-4P Crystal Oscillators ROHSECSCrystal Oscillators0826-1G1T-23-F
插件Ethernet Connectors / Modular Connectors (RJ45 RJ11)Bel Fuse
NRS5030T1R0NMGJ
SMD,4.9x4.9mm15mΩ 1uH 4A 6.6A ±30% SMD,4.9x4.9mm Power Inductors ROHSTaiyo YudenPower Inductors
README
README.mdintegralstick
STM32F7 + Artix-7 SoM
Parts
214| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C10, C12, C14, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28 +27 |
| 21 | 0.1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C55, C56, C57, C58, C59, C60, C61, C62, C63, C64, C65, C66, C67, C68, C69, C70 +5 |
| 21 | 33 | azonenberg_pcb:EIA_0402_RES_NOSILK | R2, R3, R11, R12, R13, R14, R15, R16, R21, R22, R26, R27, R28, R29, R30, R31 +5 |
| 21 | 4.7 uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C1, C2, C3, C4, C5, C6, C7, C11, C13, C15, C37, C38, C39, C40, C41, C43 +5 |
| 9 | 1K | azonenberg_pcb:EIA_0402_RES_NOSILK | R1, R10, R19, R20, R23, R24, R25, R34, R36 |
| 9 | 270 | azonenberg_pcb:EIA_0402_RES_NOSILK | R37, R38, R39, R40, R41, R42, R43, R44, R52 |
| 9 | 600R @ 100 MHz | azonenberg_pcb:EIA_0402_CAP_NOSILK | L1, L2, L3, L4, L5, L6, L8, L9, L10 |
| 9 | PMOD_HOST | azonenberg_pcb:CONN_HEADER_2.54MM_2x6_RA_PMOD_HOST | J7, J8, J9, J10, J11, J12, J13, J14, J23 |
| 6 | SMA | azonenberg_pcb:CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | J16, J17, J18, J19, J20, J21 |
| 6 | TESTPAD | azonenberg_pcb:TESTPOINT_SMT_0.5MM | J22, J24, J25, J26, J27, J28 |
| 6 | VAL** | azonenberg_pcb:FIDUCIAL_1MM | FIDUCIAL_1MM, FIDUCIAL_1MM, FIDUCIAL_1MM, FIDUCIAL_1MM, FIDUCIAL_1MM, FIDUCIAL_1MM |
| 4 | 0826-1G1T-23-F | azonenberg_pcb:CONN_BELFUSE_0826_1G1T_23_F | J3, J4, J5, J6 |
| 4 | 10K | azonenberg_pcb:EIA_0402_RES_NOSILK | R8, R17, R32, R53 |
| 4 | 1M | azonenberg_pcb:EIA_0402_RES_NOSILK | R45, R46, R47, R48 |
| 3 | 12.1K 1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R9, R18, R33 |
| 3 | DNP | azonenberg_pcb:EIA_0402_RES_NOSILK | R49, R50, R51 |
| 3 | ECS-1612MV-250-CN-TR | azonenberg_pcb:OSCILLATOR_1.6x1.2 | U3, U4, U6 |
| 3 | KSZ9031RNX | azonenberg_pcb:QFN_48_0.5MM_7x7MM | U1, U2, U5 |
| 3 | SW_SPST | azonenberg_pcb:SWITCH_RAFI_MICON_5 | SW1, SW2, SW3 |
| 3 | TESTCLIP | azonenberg_pcb:TESTPOINT_SMT_KEYSTONE_5016 | J29, J30, J31 |
| 2 | 47 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C75, C88 |
| 1 | 1 | azonenberg_pcb:EIA_0402_RES_NOSILK | R54 |
| 1 | 22 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C87 |
| 1 | 2A | azonenberg_pcb:EIA_0603_RES_NOSILK | F1 |
| 1 | 4.7 nF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C86 |
| 1 | BLM31KN271SH1L | azonenberg_pcb:EIA_1206_CAP_NOSILK | L7 |
| 1 | CONN_3_PWROUT | azonenberg_pcb:CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | K1 |
| 1 | CONN_INTEGRALSTICK_FPGA_HOST | azonenberg_pcb:CONN_SAMTEC_QSH-060-01-L-D-A | J2 |
| 1 | CONN_INTEGRALSTICK_MCU_HOST | azonenberg_pcb:CONN_SAMTEC_QSH-060-01-L-D-A | J1 |
| 1 | GREEN | azonenberg_pcb:EIA_0603_LED | D1 |
| 1 | LOGO | w_logo:Logo_silk_polarity_center_5x1.4mm | G*** |
| 1 | LOGO | w_logo:Logo_silk_WEEE_3.4x5mm | G*** |
| 1 | LOGO | w_logo:Logo_silk_OSHW_6x6mm | G*** |
| 1 | LOGO | w_logo:Logo_silk_ROHS_5x2.8mm | G*** |
| 1 | LOGO | azonenberg_pcb:LONGTHING-600DPI | G*** |
| 1 | NRS5030T1R0NMGJ | azonenberg_pcb:INDUCTOR_YUDEN_NRS5030 | L11 |
| 1 | SC185EUL | azonenberg_pcb:QFN_16_0.5MM_3x3MM | U7 |
| 1 | XILINX_JTAG | azonenberg_pcb:XILINX_JTAG_PTH_MOLEX_0878311420 | J15 |
The 209 most common of 214 parts.
More from azonenberg/integralstick
3- 4 layers53 × 63 mm
- 4 layers45 × 63 mm
Similar boards
- 10 layers130 × 90 mm
- 10 layers151 × 111 mm
Switch engine
azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
369 parts36BSD-3-Clause - 4 layers100.5 × 62.5 mm
Baset1-media converter
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
180 parts17BSD-3-Clause - 4 layers47.5 × 57 mm
Rgmii expansion
azonenberg/efinix-tests
Miscellaneous experiments with Efinix FPGAs
64 parts1BSD-3-Clause - 8 layers145 × 139 mm
Latentpink
azonenberg/latentpacket
The LATENTPACKET network infrastructure platform
841 parts30BSD-3-Clause - 10 layers165 × 121 mm
Triggercrossbar
azonenberg/triggercrossbar
Rack mountable crossbar matrix for T&M trigger in/out signals, allowing dynamic reconfiguration of an experiment without recabling
633 parts8BSD-3-Clause - 2 layers31.8 × 19 mm
Adafruit adafruit verter pcb adafruit verter tps63060 2a boostbuck
oomlout/oomlout_oomp_project_bot_v_2
37 parts - 2 layers114 × 102 mm
Rpi cm4-switch board
sequoia-hope/rpi-cm4-switch-board
A Raspberry Pi (RPi) Compute Module 4 (CM4) Carrier Board with integrated gigabit switch
94 parts45
Questions
How big is the Host full PCB?
It measures 117 × 129.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Host full use?
214 parts, built around the KSZ9031RNXCA, SC185EULTRT, ECS-1612MV-250-CN-TR and 0826-1G1T-23-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Host full KiCad files?
From the azonenberg/integralstick repository on GitHub, at the commit this page was made from: the board is host-full/host-full.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Host full design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).