Skip to the content
2 layers32 × 20 mmPager panel, the printed circuit board in 3D

Pager panel

awong-dev/pager

Low-powered, gps and messaging capable pager for kids

Size
32 × 20 mm
Copper layers
2
Thickness
1 mm
Parts
27
Nets
30
Pads
96
Tracks, vias
362, 24
Pours
6
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 Sep 2026
Updated
7 Nov 2026

Overview

Pager panel is an open-source printed circuit board by awong-dev, from the awong-dev/pager repository on GitHub. It is a 2-layer board of 32 × 20 mm with 27 parts on 30 nets, routed with 362 tracks and 24 vias.

It is built around the B5819W, SWPA3015S470MT and SM08B-SRSS-TB, with the FH34SRJ-24S-0.5SH(50), FH34SRJ-6S-0.5SH(50) and SM02B-SRSS-TB among its other parts. Its parts include 11 capacitors, 4 resistors, 4 connectors, 3 diodes and 1 transistor.

Main components

7

README

hardware/carrier/README.md

pager-carrier and pager-panel

KiCad 10 projects for the carrier board that replaces the Adafruit breakouts around the Walter module, and for the small panel board that drives the 2.9" SSD1680 e-ink glass. Both started as Python under gen/.

Carrier: hand-edited since 19 Oct 2026 (commit "Manually review and fix carrier board schematic"). The carrier .kicad_sch files are the source of truth; gen/carrier.py / gen/carrier_pcb.py / gen/build.py describe the 17 Oct version and must NOT be re-run (they overwrite the hand edits). The carrier .kicad_pcb still matches the 17 Oct netlist and needs "Update PCB from schematic" after the schematic rework.

Panel: still generated. gen/panel.py + gen/panel_pcb.py are current; regenerate only the panel with a driver that calls build.build_panel(True) (never build.py's main, which rebuilds the carrier too), then panel_pcb.py --route and finish_pcb.py panel with KiCad's python.

Brief: the "Pager Carrier Board — KiCad Handoff" doc (17 Oct 2026). The owner added two changes on 17 Oct: the fuel gauge is populated, and the e-ink ZIF and boost cluster moved to a separate panel board that sits between the glass and the battery, cabled to the carrier over an 8-way JST SH.

Layout of this directory

PathWhat
pager-carrier.kicad_pro/.kicad_sch/.kicad_pcbcarrier project, root schematic, board
power.kicad_sch … peripherals.kicad_schthe five hierarchical sheets from the brief
pager-carrier.kicad_sym, pager-carrier.pretty/project symbols (Walter, BQ25185, TPS62840, LIS2DW12, DRV2605L, MAX17048, rail power symbols) and custom footprints (Walter, BQ25185, TPS62840, USB4235, FH34SRJ 24S/6S)
panel/pager-panel project (display ZIF, front-light ZIF, boost, 10-way SH), shares the symbol library above
out/, panel/out/ERC and DRC reports, schematic PDF, BOM CSV, netlist, Freerouting DSN/SES
gen/generator: build.py (schematics + exports), carrier_pcb.py / panel_pcb.py (boards, run with KiCad's python), finish_pcb.py

Regenerate: python3 gen/build.py (schematics, ERC, PDF, BOM, netlist), then /Applications/KiCad/KiCad.app/Contents/Frameworks/Python.framework/Versions/Current/bin/python3 gen/carrier_pcb.py --route (needs the Freerouting jar path in gen/pcb.py) and the same for panel_pcb.py.

Custom footprints and where their numbers came from

  • Walter_Module_2x14_THT: datasheet rev 1.1 (hw 1.6) section 6 plus the vendor walter-solder.kicad_mod in ~/src/walter-hardware. Rows 17.78 mm apart, 2.54 pitch, pin 1 at 9.72 mm from the USB-C end, 1.02 drill / 1.7 pad. The carrier sits above a header-side-up Walter, so the pattern is the mirror of the vendor's: pin 1 is on the +X row as seen from the carrier top. SIM holder, u.FL jacks and USB-C are marked on User.Comments.
  • BQ25185_WSON-10_DLH0010A_2.2x2mm_P0.4mm_EP0.9x1.5mm: TI drawing 4226298/A (datasheet SLUSF65B): pads 0.5 x 0.2 on 0.4 pitch, columns 2.1 mm apart, thermal pad 0.9 x 1.5 with two 0.2 mm vias. Matches the SnapEDA footprint in ~/Documents/KiCad/KidPager/BQ25185DLHR/ and KiCad's stock Texas_DLH0010A_WSON-10-1EP_2.2x2mm_P0.4mm_EP0.9x1.5mm pad for pad.
  • USB_C_Receptacle_GCT_USB4235_Vertical: GCT drawing rev A (21 Aug 2024). 16 pads 0.30 x 0.87 on 0.5 pitch at x = ±0.25/0.75/1.25/2.75, rows at y = ±0.87; plated shell slots 0.6 x 0.85 (1.1 x 1.35 copper) at x = ±5.0; NPTH pegs 0.6 mm at x = ±3.75. Height 6.5 mm. Only ordering code: USB4235-03-C.
  • TPS62840_VSON-HR-8_DLC0008B_1.5x2mm_P0.5mm: TI DLC0008B land pattern, pads 0.6 x 0.25 at x = ±0.65 (the stock SOT-583-8 is 0.09 mm wider per side).
  • Hirose_FH34SRJ-24S-0.5SH and -6S-: Hirose FH34SRJ catalog (Nov 2018) page 4 land pattern: contact pads 0.3 x 0.8 on 0.5 pitch, fitting pads 0.4 x 0.8 at the E/F spans 3.3 mm behind the contacts; body D wide, 3.8 deep, 1.0 mm high, top and bottom contact, back-flip actuator. Pin 1 at -X with the contacts (FPC entry) at -Y, the same convention as KiCad's FH12 footprints. KiCad 10 ships no FH34SRJ footprints.

Mechanical placement (carrier, 85 x 52 mm, 1.0 mm FR4)

  • Walter crosswise under the left 26 mm (its 55 mm axis runs across the 52 mm board width); header centre at (13.5, 24.73). USB-C end of the Walter at the top edge, antenna/SIM end at the bottom edge.
  • Antenna notch 12 x 6 mm at the top-left edge (x 2.5–14.5): the u.FL jacks are at the Walter's USB-C end, not the antenna end as the brief assumed. 3 mm all-layer keep-outs around both jacks.
  • Top strip (y 0–8): vertical USB-C J1, slide switch SW1, 10-way panel cable J3, battery J2 (cables exit toward the tin wall).
  • Glass region (y 8–44.7, x 0.5–79.5): parts ≤ 2 mm only. Right end (x 62–79.5) left empty for the panel board.
  • Bottom strip (y 44.7–52): keyboard J4 (cable up to the CardKB in the lid), LED J6 and haptic J7 (DNP), the 14 test pads (1.5 mm pitch), and the front-light button SW2 at the right end (80, 48.4), marked LIGHT.
  • Walter region, top side only, between the header rows: CP2102N cluster, SN74LVC2G126 + UMH3N auto-reset, BQ25185 cluster, P-FET switch parts.
  • Mounting holes H1–H4 at (17, 2.5), (82.8, 2.2), (82.8, 43.5), (2.5, 49.5).

Part heights (owner: low profile is critical; CardKB lives in the lid)

PartHeight above its board
J1 USB4235 vertical USB-C6.5 mm (owner's choice; the horizontal fallback is 3.2)
J2, J4 JST PH side-entry (S2B/S4B-PH-SM4-TB)5.5 mm (6.0 deep; JST ePH catalog p.4)
SW1 slide switch JS102011SAQN3.5 mm
J3 JST SH side-entry SM10B-SRSS-TB2.9 mm
SW2 tactile SKQGAFE0101.5 mm (sits beside the glass, below the glass top)
everything under the glass≤ 1.3 mm: 0805 caps 1.25, SOT-23 1.1, QFN 0.9, L2 1.0 (the 1210 100 µF at 2.5 mm is gone)
glass GDEY029T94-FL032.01 mm incl. the front-light plate
panel board1.0 mm FR4 + 1.5 mm (L1) ; FH34SRJ ZIFs 1.0, SOD-123 1.1 — a 0.8 mm board is fine

So above the carrier: glass stack ≈ 1.3 + 2.0 (or panel 1.0 + 1.5 + 2.0 at the tail end), and the USB-C at 6.5 is the only thing taller than 3.5 mm.

Deviations from the brief and interpretations

  1. CP2102N package: the GQFN20 has no DTR pin, so auto-reset is impossible with it. U5 is CP2102N-A02-GQFN24 (DTR pin 23, RTS 19, VIO tied to VDD, RSTb pull-up 1 k per datasheet, VBUS sense via 22.1 k / 47.5 k, 4.7 µF + 100 nF per supply pin).
  2. TPS62840DLCR is not a fixed 3.3 V part: VSET takes a 267 k resistor to GND for 3.3 V; pin 8 is VOS (output sense), wired to 3V3.
  3. PWR_FLAG: SYS is driven by the charger's SYS power-output pin, so a flag there is an ERC error and was dropped; the other rails keep theirs.
  4. TPS22917 QOD left open (open-collector to power-output is an ERC error); tie to VOUT in layout if quick discharge of the panel rail is wanted.
  5. Panel reference circuit follows the GDEY029T94 spec sheet (24.10.22), not the brief's placeholders: RESE 2.2 Ω, L1 47 µH ≥ 0.43 A (cjiang FNR3015S470MT, 3 x 3 x 1.5 mm), 1 MΩ GDR pull-down, FPC pin 5 = VSH2 and pin 20 = VSH1 (both 1 µF/25 V), VPP open. Diode orientation as the brief described (D2 anode on the pump node, D1 anode on VGL).
  6. ISET is 604 Ω (600 Ω is not an E96 value): 497 mA. ILIM/VSET 18 k gives the 500 mA limit (475 mA typ) with 4.20 V; the DNP alternate is 13 k (1.1 A), not 1 A.
  7. TS/MR: a single 10 k to GND, per the datasheet "TS not used" text.
  8. Front light = GDEY029T94-FL03 (owner, 17 Oct): the light has its own 6-pin 0.5 mm flex (pins 1-2 anode, 3-4 NC, 5-6 cathode; 4 LEDs in parallel, Vf 2.75/2.8/3.3 V, 60 mA max; 3.5 mm wide, ~30 mm long, leaves the glass at the corner next to the display tail). Its ZIF (panel J3, FH34SRJ-6S) is on the panel board and the anode/cathode ride the panel cable (pins 9/10), so the carrier's J5 is gone and the cable is a 10-way SH. The brief's NSI45020 CCR is dropped (needs 1.8 V headroom, and was a 20 mA part): R-FL is a 33 Ω 1206 from SYS_SW (18 mA at a 3.4 V cell, 42 mA at 4.2 V, 50 mA on USB); dim or compensate with FL_PWM. 27 Ω is the brightest safe value (60 mA on USB). 19 Oct (owner): the ballast is 0 Ω and Q4 (now AO3400A) carries a 15 Ω source resistor with an MMBT3904 base-emitter across it, a ~45 mA clamp that is independent of SYS and of firmware; the 1 k gate resistor lets the BJT pull the gate down. Fits both the FL03 (60 mA max) and the Orient AEZ122250A00 light (3 LEDs, 45 mA at Vf 3.3 V). 8b. Two front-light ZIF positions on the panel board (19 Oct). The 6-pin light flex pinout (1-2 anode, 3-4 NC, 5-6 cathode) is the same on every panel seen, but where the tail leaves the glass is not. J3 "FL-A" (fitted) is for the FL03 corner tail; J4 "FL-B" (DNP, x = 9.2 mm, 10.8 mm from J1 on its pin-24 side) is for the Orient AEZ122250A00-2.13ENRWS tail that runs beside the display tail. The Orient light's pin numbers run opposite to its display tail's, so J4 is wired 1-2 cathode / 5-6 anode. The cable's FL_P / FL_N reach FL_A / FL_K through four 0 Ω links: R1/R2 straight (fitted), R3/R5 crossover (DNP), so a tail whose polarity turns out mirrored is a resistor swap. The display ZIF J1 and its reference circuit (47 µH, 2.2 Ω, MBR0530, 1 µF/25 V, BS1 low) are identical in the Good Display and Orient sheets, so the same panel board takes either glass. 24 Oct (measured from the drawings, GDEY029T94-FL03-CAD.pdf 2023-05-04 and AEZ122250A00-2.13ENRWS rev 1.0 p.5): both front-light tails leave on the pin-24 side of the display tail (front view), not the pin-1 side as placed on 19 Oct. FL03: tail centre 15.5 mm from the display tail centre (display tail left edge 10.42 from the LGP edge + 0.80 LGP inset, 12.50 wide; FL tail 3.50 wide, 2.00 from the glass corner), 11.5 mm long with the contacts at 9.5-11.5, so J3 sits in the edge row. Orient 2.13": 10.8 mm, FL tail 20.0 mm long (contacts 17.8-20.0), display tail 14.3 mm; its FL pins run 6->1 away from the display tail. Both ZIFs therefore sit left of J1 on the board (J1 pad 24 is on the left): J3 at J1.x-15.5 in the edge row, J4 at J1.x-10.8 one row inboard, since 5.5 mm wide ZIFs 4.7 mm apart cannot share a row. The 0R links R1/R2/R3/R5 are now two bridged solder jumpers JP1/JP2 (1-2 bridged = R1/R2; cut and bridge 2-3 = R3/R5).
  9. Front-light button SW2 (owner, 17 Oct): FL_BTN on IO4 (header pin 15, RTC GPIO so it can be an ext1 wake), 100 k pull-up to 3V3, 100 nF, switch to GND. IO4 was a spare test-pad pin; TP13 still touches it. Firmware needs a pins.h entry for it.
  10. Fuel gauge U10 is populated (owner, 17 Oct). CELL and VDD both on VBAT, QSTRT and CTG to GND, EP to GND.
  11. MAX17048 footprint: stock TDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm (matches the Maxim 21-0168 drawing); DRV2605L uses TSSOP-10_3x3mm_P0.5mm (TI DGS land within 0.05 mm).
  12. Walter mounting: the datasheet has no header-side-up guidance; the nano-SIM then faces the carrier and loads from the antenna end, which is within ~1 mm of the tin wall. Fit the SIM before mounting.
  13. References: Q3 of the brief is the second half of Q2 (one UMH3N); the carrier's 10-way display connector is J3 (the brief's J3b); the panel board owns the brief's J3 ZIF (as J1), L1, Q5, D1–D3, R4, C3–C5, plus the front-light ZIF as J3.
  14. BOM: SN74LVC2G126DCUR (VSSOP-8) and USB4235 are not stocked by LCSC/JLCPCB (hand-place; DCTR is MSOP-8 0.65 mm, a different footprint). LCSC numbers in the BOM were verified on jlcpcb.com/lcsc.com on 16–17 Oct 2026; basic parts preferred.
  15. Routing is Freerouting's output (GND routed as tracks, then pours on both layers). After the 17 Oct morning changes both boards route completely: carrier and panel DRC show 0 unconnected, 0 clearance and 0 courtyard errors; what remains is silkscreen-over-pad/overlap notes and a starved-thermal warning on the USB-C shell and one panel pad. The boost loop on the panel and the USB D+/D− pair still deserve a manual look.

Sleep-current audit (owner, 17 Oct: "very low powered during sleep")

Battery only, SW1 on, Walter asleep. Carrier parts, from the datasheets:

ConsumerSleep currentNote
BQ25185 battery quiescent (IQ_BAT)4 µA typ, 5 maxunavoidable while the cell is connected
MAX170483 µA hibernate (23 µA active)firmware must leave HIBRT at its default so it auto-hibernates, or force hibernate
TPS62840 3V3 buck~0.1 µA (36 nA VIN + 56 nA VOS)
TPS22917 (3V3_EPD off)10 nA0.5 µA when on
LIS2DW12 low-power mode 1~1 µAshake wake; 50 nA if powered down
Q1 gate network1.9 µA (was 38 µA)100 k pull-up changed to 2.2 M; the ON switch pulls the gate low through 10 k + pull-up
SN74LVC2G126 U60 (was up to ~10 µA)VCC moved from 3V3 to BRG_VDD (CP2102N regulator), so it is unpowered without USB; Ioff outputs, ESP_RX0 held by its 10 k
CP2102N0bus powered
STAT/ACC/RX0/FL_BTN pull-ups, VBUS dividers0all idle high or on VBUS
front light, Q4, keyboard rail, panel rail0switched off

Carrier total ≈ 10 µA on top of the Walter's own deep-sleep draw. Nothing else on the carrier is worth a part swap; the fuel gauge is the biggest remaining item and it is the one the owner asked to keep.

TPS62840 fixed-voltage question

No. Every TPS6284x orderable (TPS62840 1.8–3.3 V, TPS62841 0.8–1.55 V, TPS62842 1.8–3.6 V; DLC, YBG and DGR packages) sets its output with the VSET resistor; there is no fixed-3.3 V code. The 267 k 0603 stays.

Open questions (still open after this pass)

  • Tin interior height with the lid closed versus 8.5 + 1 + 6.5 (USB4235) mm.
  • GDEY029T94 tail pin-1 side after the 180° fold. The FH34SRJ has contacts on both faces, so the fold cannot leave the tail unconnected, but a wrong face mirrors the pin order (1↔24). The footprint keeps the FH12 bottom-contact convention from the first pass; confirm on a physical panel before ordering. Same for the 6-pin front-light tail (a mirror there only swaps anode and cathode: no light, no damage; fix = move the 0 Ω links R1/R2 to R3/R5 on the panel board).
  • UC8151 / IL0373 panels (Good Display GDEW series, Waveshare non-V2) use a different RESE value; if those must fit, give R4 a second parallel 0603 footprint and confirm the value from a specific sheet.
  • Walter header geometry against a physical module before ordering.
  • Battery lead polarity (Adafruit 328) versus J2 pin 1.
  • LTE peak current at VIN on the bench, to confirm 100 µF + 10 µF and the P-FET drop at a 3.4 V cell.
  • Where exactly the panel board sits relative to the glass tail (the carrier keeps x 62–79.5 under the glass clear for it).

Parts

27
QtyValueFootprintReferences
61uF/25VCapacitor_SMD:C_0603_1608MetricC3, C4, C7, C8, C9, C10
3B5819WDiode_SMD:D_SOD-123D1, D2, D3
210kResistor_SMD:R_0402_1005MetricR6, R7
21uFCapacitor_SMD:C_0402_1005MetricC2, C6
2FL polarityJumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP1, JP2
110uFCapacitor_SMD:C_0402_1005MetricC1
11MResistor_SMD:R_0402_1005MetricR8
12.2RResistor_SMD:R_0603_1608MetricR4
14.7uFCapacitor_SMD:C_0603_1608MetricC11
14.7uF/25VCapacitor_SMD:C_0805_2012MetricC5
147uHInductor_SMD:L_Sunlord_SWPA3015SL1
1CARRIERConnector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_HorizontalJ2
1FH34SRJ-24S-0.5SH_50_h24:HRS_FH34SRJ-24S-0.5SH_50_J1
1FH34SRJ-6S-0.5SH_50_h6:HRS_FH34SRJ-6S-0.5SH_50_J3
1FRONTLIGHTConnector_JST:JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_HorizontalJ5
1GNDTestPoint:TestPoint_Pad_D1.0mmTP1
1SI1308EDLPackage_TO_SOT_SMD:SOT-323_SC-70Q5

More from awong-dev/pager

1
  • 2 layers38.9 × 48.9 mmPager carrier, the printed circuit board in 3D

    Pager carrier

    awong-dev/pager

    Low-powered, gps and messaging capable pager for kids

    79 parts

Similar boards

  • 2 layers60 × 111.3 mmSilkscreen pcb, the printed circuit board in 3D

    Silkscreen pcb

    iandchasse/silkscreen-pcb

    Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

    189 parts589CERN-OHL-S-2.0
  • 2 layers67.9 × 131 mmFW16 EPD, the printed circuit board in 3D

    FW16 EPD

    arthomnix/FW16_EPD

    Touchscreen e-paper input module for Framework Laptop 16

    67 parts44CC-BY-SA-4.0
  • 4 layers54 × 94 mmEnku mainboard r0.1, the printed circuit board in 3D

    Enku mainboard r0.1

    raznoglaz1y/enku

    Open-source compact e-reader built around a 3.97″ e-paper display and ESP32-S3.

    156 parts1Apache-2.0
  • 4 layers46 × 46 mmLFX FC R1, the printed circuit board in 3D

    LFX FC R1

    nguyencanhanh/luckfox-rv1103-drone

    AI quadcopter on one RV1103 (Luckfox Pico Mini B): Linux + RISC-V MCU flight loop, SITL with 3D pilot view, KiCad flight-controller board

    85 partsMIT
  • 2 layers234.5 × 120.8 mmSmk kbd devkit, the printed circuit board in 3D

    Smk kbd devkit

    mburger89/SMK_Keyboard_DevKit

    59-key hot-swap mechanical keyboard PCB carrier for a socketed ESP32-C6-DevKitC-1 dev board — KiCad project generated/routed by Python scripts

    148 parts
  • 2 layers26.6 × 14.9 mmIris led v2, the printed circuit board in 3D

    Iris led v2

    bunnie/iris-hw

    CAD files for IRIS hardware designs

    28 parts14CERN-OHL-S-2.0
  • 4 layers34 × 45 mmZigbee Air Sensor, the printed circuit board in 3D

    Zigbee Air Sensor

    acha666/Zigbee-Air-Sensor

    Low power air sensor with E-ink screen and ESP32-H2

    89 parts1GPL-3.0
  • 2 layers42 × 38 mmL103 DRV8316C, the printed circuit board in 3D

    L103 DRV8316C

    bjthemost-hub/l103-drv8316c-joint

    Joint motor driver: CH32L103 + DRV8316C + MT6701. KiCad hardware, FOC firmware, 2-stage planetary gearbox (J, 25:1). MIT.

    82 partsMIT

Questions

How big is the Pager panel PCB?

It measures 32 × 20 mm and has 2 copper layers, 1 mm thick.

What parts does the Pager panel use?

27 parts, built around the B5819W, SWPA3015S470MT, SM08B-SRSS-TB and FH34SRJ-24S-0.5SH(50). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pager panel KiCad files?

From the awong-dev/pager repository on GitHub, at the commit this page was made from: the board is hardware/carrier/panel/pager-panel.kicad_pcb and its schematic hardware/carrier/core_components.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pager panel design in my own project?

Its repository states no licence, so its author keeps all rights: ask awong-dev before reusing the design.