
Sapflow gauge
21941211/WiLo
Full documentation of the WiLo (Wireless Logger) LoRa enabled environmental monitoring logger.

TVC is an open-source printed circuit board by awetzelkern, from the awetzelkern/TVC-PCB repository on GitHub. It is a 2-layer board of 38.1 × 101.6 mm with 45 parts on 63 nets, routed with 416 tracks and 147 vias.
It is built around the BMP390, W25Q128JVSIQ and RFM96W-433S2, with the TPS61022, DMN3051L and ICM-42670-P among its other parts. Its parts include 9 capacitors, 9 resistors, 7 connectors, 5 ICs and 4 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 470 | Resistor_SMD:R_0805_2012Metric | R105, R106, R108, R109, R110, R111 |
| 4 | MountingHole | MountingHole:MountingHole_3.5mm_Pad | H101, H102, H103, H104 |
| 4 | Switch | TerminalBlock_Wuerth:691137710002 | J103, J105, J107, J108 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C104, C105 |
| 2 | 100uF | Capacitor_SMD:C_0805_2012Metric | C106, C109 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C101, C107 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C102, C103 |
| 2 | DMN3051L | Package_TO_SOT_SMD:SOT-23 | Q101, Q102 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R102 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R114 |
| 1 | 1uH | Inductor_SMD:L_Bourns_SRN6045TA | L101 |
| 1 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C108 |
| 1 | 732k | Resistor_SMD:R_0805_2012Metric | R101 |
| 1 | BMP390 | BMP390:10LGA_2X2X0p75_BOS | U101 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_Mallory_AST1109MLTRQ | BZ101 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | J101 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D101 |
| 1 | ICM-42670-P | IMU:XDCR_ICM-42670-P | MT101 |
| 1 | JST-MAIN | JST:JST_B2B-PH-K-S | J104 |
| 1 | JST-PYRO | JST:JST_B2B-PH-K-S | J106 |
| 1 | ORANGE | LED_SMD:LED_0603_1608Metric | D102 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D103 |
| 1 | RFM96W-433S2 | RFM96W-433S2:MODULE_RFM96W-433S2 | U103 |
| 1 | Servo_X | Servo_Pins:WURTH_61300311121 | M101 |
| 1 | Servo_Y | Servo_Pins:WURTH_61300311121 | M102 |
| 1 | TPS61022 | Package_DFN_QFN:Texas_RWU0007A_VQFN-7_2x2mm_P0.5mm | U107 |
| 1 | Teensy4.0 | Teensy:Teensy40 | U102 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U104 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D104 |

21941211/WiLo
Full documentation of the WiLo (Wireless Logger) LoRa enabled environmental monitoring logger.

etet100/cnc_pendant
This project was designed with simplicity and practicality in mind, focusing on essential functions like jogging and basic machine control (start/stop/pause) rather than attempting to replicate all CNC controller…

Afligh8/FlightController
A simple Plug and Play FLight Controller for Wings. Supports two motors with ESC, 6 PWM pins, SPI, I2C and Serials. Also 6 ports for servos and extra GPIO pins for debug and freelance.

ShameemaCP2003/Custom-Flight-Controller-PCB
Open-source STM32 flight controller designed in KiCad for PX4 and ArduPilot-based UAV platforms.

vaishnav-ece/STM32-FixedWing-FlightController
Custom STM32-based flight controller PCB for fixed-wing UAVs featuring IMU and barometer integration, PWM servo outputs, UART/SPI/I2C/CAN interfaces, USB-C debugging, low-noise power design, PID stabilization…



SCREAM325/TI_INFINITY
contains PCB file for PCBway and GCODE files for speaker case.
It measures 38.1 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the BMP390, W25Q128JVSIQ, RFM96W-433S2 and TPS61022. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the awetzelkern/TVC-PCB repository on GitHub, at the commit this page was made from: the board is TVC Hardware/TVC.kicad_pcb and its schematic TVC Hardware/TVC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask awetzelkern before reusing the design.