Skip to the content
4 layers42.1 × 63.9 mmCamera cable, the printed circuit board in 3D

This project explores how “non-optimal” digital cameras can be used to critically analyze photography. Each camera is missing one or more of the key affordances of a modern camera.

Size
42.1 × 63.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
2
Nets
16
Pads
37
Tracks, vias
95, 10
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Mar 2025
Updated
25 Nov 2025

Overview

Camera cable is an open-source printed circuit board by awdriggs, from the awdriggs/non_optimal_imaging repository on GitHub. It is a 4-layer board of 42.1 × 63.9 mm with 2 parts on 16 nets, routed with 95 tracks and 10 vias.

README

README.md

This project explores how “non-optimal” digital cameras can be used to critically analyze photography. Each camera is missing one or more of the key affordances of a modern camera. By reintroducing limitations we can begin to understand our collective and individual relationships with photography at a moment when photography itself is being rapidly reshaped by machine learning.

Parts

2
QtyValueFootprintReferences
1~AWD_camera_ribbon:FPC_22pin_0.5mm_VerticalJ2
1~AWD_camera_ribbon:FPC_15pin_1mm_Verticalj1

More from awdriggs/non_optimal_imaging

1
  • 2 layers100 × 80 mmCamera base, the printed circuit board in 3D

    Camera base

    awdriggs/non_optimal_imaging

    This project explores how “non-optimal” digital cameras can be used to critically analyze photography. Each camera is missing one or more of the key affordances of a modern camera.

    19 parts2

Similar boards

  • 4 layers25 × 35 mmQfn csi underpad diff, the printed circuit board in 3D

    Qfn csi underpad diff

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    2 parts744MIT
  • 4 layers25.7 × 13 mmCpw test, the printed circuit board in 3D

    Cpw test

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    2 parts205
  • 4 layers54 × 16 mmBnc test, the printed circuit board in 3D

    Bnc test

    azonenberg/starshipraider

    Open hardware test equipment

    2 parts193BSD-3-Clause
  • 4 layers94 × 53.4 mmMegaProgrammer, the printed circuit board in 3D

    MegaProgrammer

    clydeshaffer/gametank

    design files for the gametank hardware implementation

    2 parts150
  • 4 layers90.2 × 55.9 mmArduinox86 486 shield, the printed circuit board in 3D

    Arduinox86 486 shield

    dbalsom/arduinoX86

    An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

    2 parts114
  • 4 layers45.3 × 11.8 mmIdeswap, the printed circuit board in 3D

    Ideswap

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    2 parts87
  • 4 layers39.4 × 53.3 mmSAB To RPi, the printed circuit board in 3D

    SAB To RPi

    whollender/SuperAudioBoard

    High quality, 24-bit audio codec board for Teensy 3.x

    2 parts75
  • 4 layers99.7 × 13 mmE Field 10cm, the printed circuit board in 3D

    E Field 10cm

    imendizabal/Near-Field-Probes

    Open Source kit of Near Field Probes for Electromagnetic Compatibility (EMC) troubleshooting

    2 parts59GPL-3.0

Questions

How big is the Camera cable PCB?

It measures 42.1 × 63.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Camera cable use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Camera cable KiCad files?

From the awdriggs/non_optimal_imaging repository on GitHub, at the commit this page was made from: the board is circuit/camera_cable/camera_cable.kicad_pcb and its schematic circuit/camera_base/camera_base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Camera cable design in my own project?

Its repository states no licence, so its author keeps all rights: ask awdriggs before reusing the design.