

RubberESP32-S3
A Rubber Ducky Devboard built around an ESP32-S3-WROOM-1U Module
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 48
- Pads
- 160
- Tracks, vias
- 315, 36
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Jul 2025
- Updated
- 2 Dec 2025
Overview
RubberESP32-S3 is an open-source printed circuit board by aviyanp, from the aviyanp/RubberESP32-S3 repository on GitHub. It is a 4-layer board of 50 × 50 mm with 28 parts on 48 nets, routed with 315 tracks and 36 vias.
It is built around the ESP32-S3-MINI-1U-N8 and AMS1117-3.3. Its parts include 11 resistors, 6 capacitors, 3 connectors, 2 ICs and 2 switches. It belongs with the microcontroller boards boards and the ESP32 boards of this library.
Main components
2ESP32-S3-MINI-1U-N8
VFQFN-56-EP-40℃~+105℃ -98.4dBm 1.8V~3.6V、3V~3.6V 2.4GHz 21dBm 340mA 88mA Bluetooth5.0 ESP32-S3 UART、SDIO、SPI、I2C、I2S、JTAG、USB VFQFN-56-EP WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdRubberESP32-S3
A Rubber Ducky Devboard built around an ESP32-S3-WROOM-1U Module. I built this because I really wanted to make my first devboard and it seemed like the perfect time to do so! It took way too much work, and it costs ~$90 because of Standard PCBA for the ESP32-S3, so I think it'd be better to just buy the parts needed to solder it on by hand and learn all about SMD soldering! It's definitely a learning curve trying to figure out what goes where and how to not screw up your routing so bad that you have to reverse ~4+ hours of work. I'm eventually trying to make an all-in-one mainboard for a robot that would incorporate 4 custom-made motor drivers and an ESP32-S3 controlling it all, so this is the first step in that direction! For now, I wanted something that I can easily test out and use IRL, so I decided to make a rubber ducky! It was really freaking rage-inducing, but it was all good fun and I learned a lot from it all.
Images

| Comment | Designator | Footprint | LCSC | Quantity | Price (Based on MOQ) | Notes |
|---|---|---|---|---|---|---|
| 5.1K | R12,R13 | R0603 | C14677 | 4 | $0.12 | |
| 10K | R10,R11,R3,R5,R6,R7,R8,R9 | R0603 | C15401 | 16 | $0.09 | |
| 100nF | C2,C4 | C0603 | C1591 | 4 | $0.28 | |
| 1uF | C3 | C0603 | C1592 | 2 | $0.17 | |
| 100R | R4 | R0603 | C25201 | 2 | $0.1 | |
| 22uF | C6 | CAP-SMD_BD6.3-L6.6-W6.6-FD | C267472 | 2 | $0.64 | |
| TYPE-C 16PIN 2MD(073) | USB1 | USB-C-SMD_TYPE-C-6PIN-2MD-073 | C2765186 | 2 | $1.1 | |
| 22uF | C1 | C1210 | C2918511 | 2 | $0.4 | |
| ESP32-S3-MINI-1U | U1 | ESP32-S2-MINI-1U | C2980296 | 3 | $10.8 | I have 3 because I'd otherwise get a $3 fee and it costs around that and it's pretty easy to mess up when soldering it. |
| AMS1117-3.3 | U2 | SOT-223-3_TabPin2 | C347222 | 2 | $0.2 | |
| TF PUSH | Card1 | TF-SMD_TF-PUSH | C393941 | 2 | $0.55 | |
| SW_SPST | SW1,SW2 | SW-SMD_L3.9-W3.0-P4.45 | C455280 | 4 | $0.46 | |
| 10uF | C5 | CAP-SMD_BD6.3-L6.6-W6.6-FD | C72482 | 2 | $0.45 | |
| Conn_01x02 | J2 | PinHeader_1x02_P2.54mm_Vertical | 1 | $5.49 | Price includes other headers | |
| Conn_01x02 | J1 | PinHeader_1x02_P2.54mm_Vertical | 1 | |||
| Conn_01x08 | J3 | PinHeader_1x08_P2.54mm_Vertical | 1 | |||
| Solder Paste | 1 | $13.95 | ||||
| Solder | 1 | $8 | ||||
| PCB | 5 | $2 | ||||
| Stencil | 1 | $7 | ||||
| Hotplate | 1 | $15 | ||||
| JLCPCB Shipping | $18.63 | |||||
| LCSC Shipping | $10.45 | |||||
| Amazon Shipping | $9 |
Total Cost: $104.88
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | EasyEDA2KiCad:R0603 | R5, R6, R7, R8, R9, R10, R11 |
| 2 | 100nF | EasyEDA2KiCad:C0603 | C2, C4 |
| 2 | 5.1K | EasyEDA2KiCad:R0603 | R12, R13 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SW_SPST | EasyEDA2KiCad:SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 1 | 100R | EasyEDA2KiCad:R0603 | R4 |
| 1 | 10k | EasyEDA2KiCad:R0603 | R3 |
| 1 | 10uF | EasyEDA2KiCad:CAP-SMD_BD6.3-L6.6-W6.6-FD | C5 |
| 1 | 1uF | EasyEDA2KiCad:C0603 | C3 |
| 1 | 22uF | EasyEDA2KiCad:CAP-SMD_BD6.3-L6.6-W6.6-FD | C6 |
| 1 | 22uF | EasyEDA2KiCad:C1210 | C1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | ESP32-S3-MINI-1U | RF_Module:ESP32-S2-MINI-1U | U1 |
| 1 | TF PUSH | EasyEDA2KiCad:TF-SMD_TF-PUSH | Card1 |
| 1 | TYPE-C 16PIN 2MD(073) | EasyEDA2KiCad:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
Similar boards
- 4 layers79.9 × 80 mm

- 4 layers

DAC PCB
saketharjun12-boop/High-Performance-DAC-system
This is a analog IC design for a High performance DAC system, The architecture is comprised of dual AKM4191EQ/EX flagship chips for lossless audio.
184 parts1 - 2 layers44 × 20 mm

- 2 layers40 × 40 mm

- 2 layers32 × 80 mm

- 2 layers38.5 × 38.5 mm

- 2 layers80 × 46 mm

Main control board
StarweaverAudioLabs/main_control_board
Main controller board for Haruto's DAC
51 partsGPL-3.0 - 4 layers40 × 40 mm

Questions
How big is the RubberESP32-S3 PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RubberESP32-S3 use?
28 parts, built around the ESP32-S3-MINI-1U-N8 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RubberESP32-S3 KiCad files?
From the aviyanp/RubberESP32-S3 repository on GitHub, at the commit this page was made from: the board is PCB/RubberESP32-S3.kicad_pcb and its schematic PCB/RubberESP32-S3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RubberESP32-S3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aviyanp before reusing the design.