
H bridge controller
avi-guha/ROBOT
For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name

For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name
GOONER2000 is an open-source printed circuit board by avi-guha, from the avi-guha/ROBOT repository on GitHub. It is a 4-layer board of 142 × 110 mm with 103 parts on 144 nets, routed with 395 tracks and 0 vias.
It is built around the LM311, MCT62H and L7805. Its parts include 28 connectors, 15 ICs and 11 capacitors.
This repository is for sharing and preserving essential information for the robot.
The main branch is used to share safe, working resources. Any deployable resource should be safe to use before getting added to main. Any modification to the main branch should be done through Pull Requests.
Each teammate will have a dedicated branch. Any commits and pushes should be done to this personal branch. Unsafe code or resource can be pushed to personal branches. Once a new resource is confirmed to be safe, a Pull Request can be made to add it to the main branch.
Clone this repo to your local device.
git clone https://github.com/KazuoCalvin/ENPH-253-ROBO-SUMMER-.git
Switch to Personal branch
For your first time, use
git fetch origin
git checkout -b your-branch-name origin/your-branch-name
From next time, to switch branches, use
git checkout (Personal Branch name)
Commit and Push in Personal Branch
git commit -m "concise, but descriptive message"
git push origin (Personal Branch name)
Rebase to main often to prevent merge conflicts
git fetch origin
git rebase origin/main
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R_CLAW_PWM_P1, R_CLAW_PWM1, R_DHES_PU1, R_IRED_LEFT_PU1, R_IRED_LEFT1, R_IRED_RIGHT_PU1, R_IRED_RIGHT1, R_IRLF_BACKUP_PU1, R_IRLF_BACKUP1, R_IRLF_LEFT_PU1, R_IRLF_LEFT1, R_IRLF_RIGHT_PU1, R_IRLF_RIGHT1, R_PWM_BU_P1, R_PWM_BU_P2, R_SM1_DIR2 +4 |
| 13 | 100 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R_IRED_LEFT_LED1, R_IRED_RIGHT_LED1, R_IRLF_BACKUP_LED1, R_IRLF_LEFT_LED1, R_IRLF_RIGHT_LED1, R_PWM_BU1, R_PWM_BU2, R_SM1_DIR1, R_SM1_PWM1, R_SM2_DIR1, R_SM2_PWM1, R_SM3_DIR1, R_SM3_PWM1 |
| 10 | Conn_01x03_Socket | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4, J5, J10, J12, J13, J14, J15, J16, J17, J20 |
| 9 | Conn_01x04_Socket | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2, J3, J6, J7, J8, J11, J22, J23, J25 |
| 6 | 100p | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C3, C4, C5, C9, C10, C11 |
| 6 | LM311 | Package_DIP:DIP-8_W7.62mm | U1, U2, U4, U5, U6, U9 |
| 6 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T93YA_Vertical | RV1, RV2, RV3, RV4, RV5, RV6 |
| 5 | MCT62H | Package_DIP:DIP-8_W7.62mm | U3, U11, U13, U14, U15 |
| 4 | 47u | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C2, C6, C7, C8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J28, J29, J30 |
| 3 | Pololu_Breakout_DRV8825 | Module:Pololu_Breakout-16_15.2x20.3mm | A1, A2, A3 |
| 2 | 100k | Potentiometer_THT:Potentiometer_Vishay_T93YA_Vertical | RV_Kd1, RV_Kp1 |
| 2 | Conn_01x02_Socket | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J18, J19 |
| 2 | Conn_01x05_Socket | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1, J9 |
| 2 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U7, U10 |
| 1 | 47p | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C1 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J21 |
| 1 | R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R_SM3_DIR2 |
| 1 | Raspberry_Pi_4 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J24 |
| 1 | ~ | GOONER2000:ESP32_Pico_Devkit | U12 |
| 1 | ~ | Package_TO_SOT_THT:TO-220-3_Vertical | U8 |

avi-guha/ROBOT
For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name

avi-guha/ROBOT
For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name

Joshuah143/pet-rescue-robot-pcbs
Designed by Joshua Himmens and Jack Polloway for the 2025 Engineering Physics Robot Summer competition.

muhin19/ATE-PCB-DESIGN
PCB design for an Automatic Test Equipment (ATE) system, including circuit design, component placement, routing, and PCB layout for electronic testing applications.

ACHRAFAHAL/Obstacle_Detection_Alarm_With_Protection_Codes_Security_System
Laser-based obstacle detection alarm with multi-code deac tivation system, integrating analog sensing with digital microcontroller control.




artemisamsx/artemisa
Schematics, PCB designs and HDL simulations to build a 8-bits MSX computer

andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
It measures 142 × 110 mm and has 4 copper layers, 1.6 mm thick.
103 parts, built around the LM311, MCT62H and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the avi-guha/ROBOT repository on GitHub, at the commit this page was made from: the board is Electrical/PCB/GOONER2000/GOONER2000.kicad_pcb and its schematic Electrical/PCB/GOONER2000/GOONER2000.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask avi-guha before reusing the design.