
GOONER2000
avi-guha/ROBOT
For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name

For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name
H bridge controller is an open-source printed circuit board by avi-guha, from the avi-guha/ROBOT repository on GitHub. It is a 2-layer board of 107.5 × 40.5 mm with 35 parts on 27 nets, routed with 146 tracks and 6 vias.
It is built around the VN2222LL-G and MCT6. It belongs with the interfaces and adapters boards of this library.
This repository is for sharing and preserving essential information for the robot.
The main branch is used to share safe, working resources. Any deployable resource should be safe to use before getting added to main. Any modification to the main branch should be done through Pull Requests.
Each teammate will have a dedicated branch. Any commits and pushes should be done to this personal branch. Unsafe code or resource can be pushed to personal branches. Once a new resource is confirmed to be safe, a Pull Request can be made to add it to the main branch.
Clone this repo to your local device.
git clone https://github.com/KazuoCalvin/ENPH-253-ROBO-SUMMER-.git
Switch to Personal branch
For your first time, use
git fetch origin
git checkout -b your-branch-name origin/your-branch-name
From next time, to switch branches, use
git checkout (Personal Branch name)
Commit and Push in Personal Branch
git commit -m "concise, but descriptive message"
git push origin (Personal Branch name)
Rebase to main often to prevent merge conflicts
git fetch origin
git rebase origin/main
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | ~ | Package_TO_SOT_THT:TO-220-3_Vertical | FET_HB1_A_bott1, FET_HB1_A_Top1, FET_HB1_B_bott1, FET_HB1_B_Top1, FET_HB2_A_bott1, FET_HB2_A_Top1, FET_HB2_B_bott1, FET_HB2_B_Top1 |
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_HB1_A_Input1, R_HB1_B_Input1, R_HB2_A_Input1, R_HB2_B_Input1 |
| 4 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_HB1_A1, R_HB1_B1, R_HB2_A1, R_HB2_B1 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 4 | VN2222LL-G | Package_TO_SOT_THT:TO-92_Inline | FET_HB1_A_prot1, FET_HB1_B_prot1, FET_HB2_A_prot1, FET_HB2_B_prot1 |
| 2 | 100nF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | Motor1_Capacitor1, Motor2_Capacitor1 |
| 2 | MCT6 | Package_DIP:DIP-8_W7.62mm | U_HB1_isolation1, U_HB2_Isolation1 |
| 2 | ~ | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | Conn_HB1_Motor1, Conn_HB1_Motor2 |
| 1 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C_HBcon1_LF1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | Batt_con1 |
| 1 | Conn_01x05_Pin | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J3 |
| 1 | LOGO | LOGO | G*** |
| 1 | LT1161CN-PBF | Package_DIP:DIP-20_W7.62mm | HBcon1 |

avi-guha/ROBOT
For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name

avi-guha/ROBOT
For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name

enph253-2025-team5/dual-h-bridge-pcb
Dual h-bridge design with a PWM signal and direction bit for controlling two motors.



johnerlandsson/cb50_ctrl
Control system for a rebuilt Camurri CB50 brewkettle.

Luca-Jones/enph-253-pet-rescue
The mechanical design was done with Onshape as our CAD tool. It is simple to use and allows for collaboration and version control.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
It measures 107.5 × 40.5 mm and has 2 copper layers, 1.6 mm thick.
35 parts, built around the VN2222LL-G and MCT6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the avi-guha/ROBOT repository on GitHub, at the commit this page was made from: the board is Electrical/PCB/H-bridge_controller/H-bridge_controller.kicad_pcb and its schematic Electrical/PCB/GOONER2000/GOONER2000.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask avi-guha before reusing the design.