2 layers89 × 100 mm
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388
2 layers287 × 105.2 mm
Keyboard KiCad
AveryLion03/60-KeyboardCustom 60 Percent Keyboard Created as a Hobby Project
- Size
- 287 × 105.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 216
- Nets
- 168
- Pads
- 949
- Tracks, vias
- 1,981, 134
- Pours
- 980
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Nov 2024
- Updated
- 2 Dec 2024
Overview
Keyboard KiCad is an open-source printed circuit board by AveryLion03, from the AveryLion03/60-Keyboard repository on GitHub. It is a 2-layer board of 287 × 105.2 mm with 216 parts on 168 nets, routed with 1,981 tracks and 134 vias.
It is built around the ATMEGA32U4 and WS2812B. Its parts include 126 diodes, 8 capacitors, 6 resistors, 2 connectors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.md60-Keyboard
Custom 60 Percent Keyboard Created as a Hobby Project
Parts
216| Qty | Value | Footprint | References |
|---|---|---|---|
| 63 | Diode | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +47 |
| 63 | WS2812B | WS2812B.pretty-master:WS2812B | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +47 |
| 52 | Keyswitch | MX_Hotswap:MX-Hotswap-1U | S_1, S_2, S_3, S_4, S_5, S_6, S_7, S_8, S_9, S_A1, S_Apost1, S_B1, S_C1, S_Ctrl2, S_D1, S_Down1 +36 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C6 |
| 3 | Keyswitch | MX_Hotswap:MX-Hotswap-1.25U | S_Alt1, S_Ctrl1, S_Win1 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | Keyswitch | MX_Hotswap:MX-Hotswap-1.5U | S_Tab1, S_Vert_Bar1 |
| 2 | Keyswitch | MX_Hotswap:MX-Hotswap-2U | S_Shift1, S_Shift2 |
| 2 | LOGO | Hookem:Hooked | G***, G*** |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 330 Ohm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | ATMEGA32U4 | ATmega32U4:ATmega32U4 | U1 |
| 1 | Conn_01x06_Pin | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type059_RT06306HBWC_1x06_P3.50mm_Horizontal | J2 |
| 1 | Keyswitch | MX_Hotswap:MX-Hotswap-2U-ReversedStabilizers | S_BackSpace1 |
| 1 | Keyswitch | MX_Hotswap:MX-Hotswap-1.75U | S_Caps1 |
| 1 | Keyswitch | MX_Hotswap:MX-Hotswap-2.25U | S_Enter1 |
| 1 | Keyswitch | MX_Hotswap:MX-Hotswap-6.25U | S_Space1 |
| 1 | LOGO | Hookem:Longhorn | G*** |
| 1 | LOGO | Hookem:Lion | G*** |
| 1 | SW_PUSH | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | XTAL_GND | keyboard_parts.pretty-master:FA-238 | X1 |
The 212 most common of 216 parts.
Similar boards
- 2 layers232.2 × 76.7 mm
- 2 layers230.5 × 82 mm
Vitamins included
Duckle29/Vitamins-included
This repo holds a variation of the lets split. This board requires no soldering
214 parts49BSD-3-Clause - 2 layers229.6 × 77.2 mm
- 2 layers316.7 × 133.4 mm
- 2 layers61.9 × 65.9 mm
- 4 layers25 × 29.6 mm
Micro
0xCB-dev/0xCB-micro
1% - 65% keyboard controller with RGB underglow and a backlight driver
45 parts5 - 2 layers285 × 116 mm
Questions
How big is the Keyboard KiCad PCB?
It measures 287 × 105.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard KiCad use?
216 parts, built around the ATMEGA32U4 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad KiCad files?
From the AveryLion03/60-Keyboard repository on GitHub, at the commit this page was made from: the board is Keyboard_KiCad/Keyboard_KiCad.kicad_pcb and its schematic Keyboard_KiCad/Keyboard_KiCad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard KiCad design in my own project?
Its repository states no licence, so its author keeps all rights: ask AveryLion03 before reusing the design.