2 layers373 × 132.3 mm
Solarinverter
cpipero/solarinverter
Kicad Project to build a programmable Solar Inverter
370 parts5CC0-1.0
4 layers200 × 150 mm
CabShield
Avery-Jutkowitz/CabShield- Size
- 200 × 150 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 158
- Nets
- 284
- Pads
- 781
- Tracks, vias
- 1,946, 158
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Jul 2024
- Updated
- 5 Jun 2025
Overview
CabShield is an open-source printed circuit board by Avery-Jutkowitz, from the Avery-Jutkowitz/CabShield repository on GitHub. It is a 4-layer board of 200 × 150 mm with 158 parts on 284 nets, routed with 1,946 tracks and 158 vias.
It is built around the FAN3122TMX, XL1509-5.0 and VNQ500PEPTR-E, with the TCMT4100, MF-MSMF030 and 1N4148W-7-F-CN among its other parts. Its parts include 59 resistors, 23 capacitors, 20 fuses, 19 ICs and 14 diodes.
Main components
8
FAN3122TMX
SOIC-8-40℃~+125℃ 1 1.7V 10.6A 11.4A 19ns 1V 23ns 4.5V~18V 650uA Low Side MOSFET Under Voltage Protection SOIC-8 Gate Drivers ROHSonsemiGate DriversXL1509-5.0
SOIC-8-40℃~+125℃ 1 150kHz 2A 2mA 4.5V~40V 5V Buck Buck Built-in Fixed No SOIC-8 DC-DC Converters ROHSUMWDC-DC Converters
VNQ500PEPTR-E
PowerSSO-12-40℃~+150℃ 4 400mA 5.5V~36V 500mΩ Active High High Side Switch 过压保护、欠压锁定、Overcurrent Protection、Over temperature protection、锁存保护、Short-Circuit Protection PowerSSO-12 Power Distribution Switches ROHSSTMicroelectronicsPower Distribution Switches
TCMT4100
SOP-16-4.4mm-40℃~+100℃ 1.35V 3.75kV 300mV@10mA,1mA 4 5.5us 50% 50mA 600% 60mA 6V 70V 7us DC Phototransistor SOP-16-4.4mm Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output Optoisolators
MF-MSMF030
PTC Resettable FuseBournsUncategorised
1N4148W-7-F-CN
SOD-123SOD-123 Switching Diodes ROHSChipNoboSwitching Diodes
PESD1CAN,215-ES
SOT-23ESD And Surge Protection (TVS/ESD)ElecSuper
SWRB1207S-680MT
SMD,12.5x12.5mm140mΩ 2.1A 68uH Magnetic Shielded Inductor ±20% SMD,12.5x12.5mm Power Inductors ROHSSunlordPower Inductors
Parts
158| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R10, R11, R13, R14, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41 +5 |
| 20 | MF-MSMF030 | Fuse:Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F1, F2, F3, F4, F5, F10, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20 +4 |
| 17 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17 +1 |
| 16 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30 |
| 16 | 4.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R44, R45, R46, R47, R48, R49, R50, R51, R52, R53, R54, R55, R56, R57, R58, R59 |
| 11 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C2, C6, C7, C8, C9, C16, C17, C18, C19, C20, C21 |
| 8 | 1N4148W-7-F | Diode_SMD:Nexperia_CFP3_SOD-123W | D7, D8, D9, D10, D11, D12, D13, D14 |
| 7 | 1uf | Capacitor_SMD:C_0603_1608Metric | C5, C12, C13, C14, C15, C22, C23 |
| 4 | LS7466-S | Package_SO:SOIC-16W_5.3x10.2mm_P1.27mm | U16, U17, U18, U19 |
| 4 | MMSZ5222BT1G | Diode_SMD:D_SOD-123 | D3, D4, D5, D6 |
| 3 | TXU0104PWR | HyprLib:TSSOP_0104PWR_TEX | U6, U7, U8 |
| 3 | VNQ500PEPTR-E | HyprLib:POWERSSO-12_STM | U9, U10, U11 |
| 2 | 100uF | HyprLib:CAP_CKG57N_TDK | C10, C11 |
| 2 | 100uf 6.3V | Capacitor_SMD:C_1210_3225Metric | C3, C4 |
| 2 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 15K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R9 |
| 2 | 20K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R12 |
| 2 | FAN3122TMX | HyprLib:SOIC8_4X5_ONS | U12, U13 |
| 2 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 2 | NIS3071MT3TWG | HyprLib:QFN105P500X600X80-17N | U14, U15 |
| 2 | PESD1CAN_215 | Package_TO_SOT_SMD:SOT-23 | CR1, CR2 |
| 2 | SS45B | Diode_SMD:D_SMB | D1, D2 |
| 1 | 3002 | Battery:BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | 855135013 | HyprLib:CONN_85513-5013_MOL | J1 |
| 1 | EEE-FK1V471SP | HyprLib:CAP_FKS_G_PAN | C1 |
| 1 | NUCLEO144-H743ZI | Module:ST_Morpho_Connector_144_STLink | U2 |
| 1 | SWRB1207S-680MT | Inductor_SMD:L_Sunlord_SWRB1204S | L1 |
| 1 | TCMT4100 | HyprLib:SOP-16_TCMT_VIS | U5 |
| 1 | XL1509-5.0 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | ~ | HyprLib:Compactus128 | J2 |
Questions
How big is the CabShield PCB?
It measures 200 × 150 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CabShield use?
158 parts, built around the FAN3122TMX, XL1509-5.0, VNQ500PEPTR-E and TCMT4100. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CabShield KiCad files?
From the Avery-Jutkowitz/CabShield repository on GitHub, at the commit this page was made from: the board is CabShield.kicad_pcb and its schematic AnalogInputs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CabShield design in my own project?
Its repository states no licence, so its author keeps all rights: ask Avery-Jutkowitz before reusing the design.
Similar boards
- 4 layers89 × 72.2 mm
Ocean harness
jericho-adler/ocean-harness
An ADAS CAN interposer for the Fisker Ocean, designed in KiCad. It plugs in between the car's harness and the ADAS ECU's main connector (CON1), so a comma device can sit between the car and the ECU.
33 partsCERN-OHL-S-2.0 - 2 layers60.3 × 44 mm
Local zappi power
donoghdb/local-zappi
A dedicated hardware implant for Myenergi Zappi V2.x EV Chargers. This project interfaces directly with the Zappi's internal control bus to provide Local MQTT, Home Assistant, and Web Control without relying on the…
40 parts12MIT - 2 layers48.3 × 123.8 mm
Altimeter v2
pimbongaerts/altimeter
Underwater sonar/USBL interface for photogrammetry surveys. PCB design files and Arduino code.
74 parts4 - 2 layers79.7 × 54 mm
- 4 layers80 × 150 mm
CAN Power Control
risingtideresearch/CAN-Power-Control
CAN device for switching high-current DC loads and reading sensors and switch closures
131 parts - 2 layers100 × 85 mm
Current
wojtek-00/HomeAutomation
A modular home automation system built around ESPHome, custom PCB design (KiCad), and 3D-printed enclosures.
102 parts - 4 layers100 × 75 mm
OpenAirScope
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
282 parts26MIT