
OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

Repo for the Sombrero hat
Sombrero V0-hat touched.route.kicad is an open-source printed circuit board by autorope, from the autorope/Sombrero-hat repository on GitHub, published under the MIT licence. It is a 2-layer board of 64 × 34 mm with 39 parts on 38 nets, routed with 278 tracks and 36 vias.
Its parts include 17 resistors, 6 capacitors, 3 ICs, 3 diodes and 3 connectors.
This is the board files for the Sombrero hat. The Sombrero hat should just work with the most recent donkey software, however if you are hacking on it. The following Pins will matter to you:
The most important one, is that the hat has an enable pin - this has to be pulled low in order for the car to work. This is always a nice feature for all robots as it can act as a kill switch. The LEDs need to be driven low as well in order to work.
Ths Sombrero buck converter is a 3A converter and will work with all Rasberry Pis including the pi4
For more information on the hat watch this video
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | RESC1005X35 | R0, R1, R2, R3, R4, R5, R6, R7, R8, R10, R11, R12, R13, R14, R15, R16 +1 | |
| 4 | CAPC1005X55 | C0, C1, C3, C5 | |
| 3 | LEDSC16080X80 | D0, D1, D2 | |
| 2 | pin-header-pkg | , | |
| 2 | CAPC3216X160 | C2, C4 | |
| 1 | INDM560520X300 | L0 | |
| 1 | pin-header-pkg$2 | ||
| 1 | SW-JS102011JCQN-pkg | S0 | |
| 1 | QFN50P300X300X100-16 | U0 | |
| 1 | SOP65P640X110-28N | U2 | |
| 1 | pin-header-pkg$4 | ||
| 1 | pin-header-pkg$3 | ||
| 1 | d-pak-5-pkg | U1 | |
| 1 | raspi-3B+-pkg | J7 | |
| 1 | XT-60-male-pkg | J0 | |
| 1 | XT-60-female-pkg | J1 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040

windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

It measures 64 × 34 mm and has 2 copper layers, 1.6 mm thick.
39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the autorope/Sombrero-hat repository on GitHub, at the commit this page was made from: the board is sombrero-V0-hat-touched.route.kicad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).