2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
32 parts1kGPL-3.0
2 layers50 × 42 mm
I2c vga
atx/TWILight23VGA-I2C Breakout board with few LEDs and Atmega
- Size
- 50 × 42 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 35
- Pads
- 146
- Tracks, vias
- 339, 35
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 15 May 2014
- Updated
- 22 Jun 2014
Overview
I2c vga is an open-source printed circuit board by atx, from the atx/TWILight repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 50 × 42 mm with 32 parts on 35 nets, routed with 339 tracks and 35 vias.
Its parts include 9 resistors, 7 diodes, 4 capacitors and 1 switch. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
README
README.mdTWILight
VGA-I2C Breakout board with few LEDs and Atmega. The footprint libraries used are the ones by oshec and Dangerous Prototypes.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R | SM0805 | R4, R5, R7, R9, R11, R13, R15 |
| 6 | LED | LED-0805 | D2, D3, D4, D5, D6, D7 |
| 2 | pinhead-1-2X05 | , | |
| 2 | 12pF | SM0805 | C3, C4 |
| 2 | 3.3kR | SM0805 | R2, R3 |
| 2 | MOSFET-N | SOT23 | , |
| 1 | burr-brown-SOT223 | ||
| 1 | pinhead-1-2X04 | ||
| 1 | m-pad-2.1-181-015-212-171 | ||
| 1 | pinhead-1-2X06 | ||
| 1 | 10uF | SM0805 | C6 |
| 1 | 12M | HC-49V | |
| 1 | 1uF | SM0805 | C5 |
| 1 | 328P | TQFP32 | |
| 1 | LED-PWR | LED-0805 | D1 |
| 1 | SPST | SM1206 | SW1 |
| 1 | UART | dp_devices-M1X3 |
Questions
How big is the I2c vga PCB?
It measures 50 × 42 mm and has 2 copper layers, 1.6 mm thick.
What parts does the I2c vga use?
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the I2c vga KiCad files?
From the atx/TWILight repository on GitHub, at the commit this page was made from: the board is pcb/i2c-vga.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the I2c vga design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers136.8 × 54.2 mm
Retropie zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
32 parts915 - 2 layers
- 2 layers16 × 20 mm
ESPKey
octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller
32 parts353GPL-2.0 - 2 layers82 × 40.9 mm
Display7447
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
32 parts269 - 2 layers40 × 38 mm
Shield
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
32 parts192MIT - 2 layers47 × 39 mm
Qrss clock tx
swharden/AVR-projects
A collection of standalone AVR projects written in C
32 parts184MIT - 2 layers30.9 × 63 mm
Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
32 parts170CC0-1.0