Skip to the content
2 layers21.6 × 32.4 mmCC ESP mod 02, the printed circuit board in 3D

CC ESP mod 02

attachix/ukit-pcb1

The PCBs needed to create the U:Kit sensor kit.

Size
21.6 × 32.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
28
Pads
56
Tracks, vias
113, 1
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
15 Apr 2018
Updated
4 Feb 2019

Overview

CC ESP mod 02 is an open-source printed circuit board by attachix, from the attachix/ukit-pcb repository on GitHub. It is a 2-layer board of 21.6 × 32.4 mm with 14 parts on 28 nets, routed with 113 tracks and 1 via.

It is built around the ESP-12E. Its parts include 9 resistors, 2 capacitors, 2 connectors and 1 IC. It belongs with the ESP8266 boards of this library.

Main components

1

README

README.md

About

This repository contains the files needed to view, modify and manufacture the Printed Circuit Boards(PCB) for the U:Kit sensor kit project.

UKit PCBs.

PCBs

U:Kit consists currently of 3 PCBS

Hardware Overview

Technical specification.

Required Software

For viewing and modifying the PCBs you will need KiCad version 4.0.5 or newer. In Ubuntu 16.04 you can install it by typing sudo apt install kicad.

Optional Software

If you want to be able to see better the differences between versions you will need

  • gerbv - for differences in Gerber files
  • ImageMagick - for differences in image files
  • diffpdf - for differences in PDF files
  • eeplot - for differences in Schema files.

Copyright

Copyright (c) 2016-2018, Slavey Karadzhov slav@attachix.com. All rights reserved.

Authors

License

All files in this repository are licensed under Creative Commons Non-Commercial-Share Alike 3.0 License . See the LICENSE file details. Basically it means that

You are free to

  • Share — copy and redistribute the material in any medium or format
  • Adapt — remix, transform, and build upon the material

The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

  • NonCommercial — You may not use the material for commercial purposes.

No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Credit can be attributed through a link to the creator website: https://attachix.com

Parts

14
QtyValueFootprintReferences
6220Resistors_SMD:R_0805_HandSolderingR3, R4, R5, R6, R8, R9
210KResistors_SMD:R_0805_HandSolderingR1, R2
1100nCapacitors_SMD:C_0805_HandSolderingC1
110kResistors_SMD:R_0805_HandSolderingR7
1220uCapacitors_THT:CP_Radial_D6.3mm_P2.50mmC2
1CONN_01X02Socket_Strips:Socket_Strip_Straight_1x02P2
1CONN_02X05Socket_Strips:Socket_Strip_Angled_2x05P1
1ESP-12EESP8266:ESP-12EU1

More from attachix/ukit-pcb

2
  • 2 layers66 × 58.4 mmCC SSD 02, the printed circuit board in 3D

    CC SSD 02

    attachix/ukit-pcb

    The PCBs needed to create the U:Kit sensor kit.

    42 parts1
  • 2 layers36.8 × 58.4 mmCC SM mod 01, the printed circuit board in 3D

    CC SM mod 01

    attachix/ukit-pcb

    The PCBs needed to create the U:Kit sensor kit.

    26 parts1

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers43 × 34.3 mmEspway, the printed circuit board in 3D

    Espway

    espway/espway

    Segway-like robot implemented on ESP8266

    37 parts122LGPL-3.0
  • 2 layers25.6 × 23 mmBreakout, the printed circuit board in 3D

    Breakout

    skorokithakis/tiny-ESP8266-breakout

    A very small and basic ESP8266 breakout board

    12 parts115BSD-2-Clause
  • 2 layers104.8 × 72.1 mmSST V2 4, the printed circuit board in 3D

    SST V2 4

    mcbittech/souliss-smart-thermostat-WiFi

    ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

    53 parts110GPL-2.0
  • 2 layers30 × 65 mmHardpass pcb, the printed circuit board in 3D

    Hardpass pcb

    girst/hardpass-passwordmanager-mirror-of-git.gir.st

    https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.

    34 parts101GPL-3.0
  • 2 layers82.5 × 22.4 mmWindow Sensor, the printed circuit board in 3D

    Window Sensor

    MakerMeik/Window-Sensor

    Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w

    19 parts67
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65
  • 2 layers100 × 45 mmTranspOtterNG, the printed circuit board in 3D

    TranspOtterNG

    Jana-Marie/transpOtterNG

    Next Generation of TranspOtter.

    63 parts51

Questions

How big is the CC ESP mod 02 PCB?

It measures 21.6 × 32.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CC ESP mod 02 use?

14 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CC ESP mod 02 KiCad files?

From the attachix/ukit-pcb repository on GitHub, at the commit this page was made from: the board is esp-board/CC_ESP_mod_02.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CC ESP mod 02 design in my own project?

Its repository states no licence, so its author keeps all rights: ask attachix before reusing the design.