Skip to the content
2 layers17.8 × 22.9 mmBNO055only, the printed circuit board in 3D
Size
17.8 × 22.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
8
Pads
12
Tracks, vias
24, 2
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Apr 2026
Updated
3 Oct 2026

Overview

BNO055only is an open-source printed circuit board by Atsuko-Otsuka, from the Atsuko-Otsuka/PuppetManipulation repository on GitHub. It is a 2-layer board of 17.8 × 22.9 mm with 2 parts on 8 nets, routed with 24 tracks and 2 vias.

Its parts include 1 IC and 1 connector.

README

README.md

VRぬいぐるみアバター操作システム

ぬいぐるみの身体動作を用いてVR空間のアバターを操作するシステムです。ユーザーがぬいぐるみを「触る」「動かす」ことで、アバターに直感的な身体表現を与えます。全身ボディトラッキングのような装着負担を抑えながら、手軽に自然な操作を実現することを目指しています。

概要

背景

VR空間におけるアバター操作は普及が進む一方で、従来の手法には次のような課題がありました。

  • 全身ボディトラッキングでは、ユーザー自身の身体動作をそのまま反映できる一方で、装着や長時間の運用に伴う身体的負担が大きい
  • ボタン式コントローラでは、比較的手軽に操作できる一方で、入力とアバターの動作が一致せず、身体としての直感的な操作が難しい

提案

本システムでは、これらの課題を同時に解決するために「ぬいぐるみ」をインターフェースとして採用しました。

ぬいぐるみを用いることで、ユーザーは自然な身体動作をそのままアバター操作に転写できます。これにより、最小限の身体負荷で思い通りの動作を実現しつつ、ユーザーの心理的ハードルを下げることができます。特に、ぬいぐるみを媒介にすることで、キャラクターになりきって大胆で愛らしい動作を自然に引き出すことが可能になります。

システム構成

フロー図

主要な構成

  • 9軸センサ(頭部、両上腕、両前腕、胴体)
  • マルチプレクサ(I2C通信)
  • XIAO ESP32-C6 マイコン
  • Unity ベースのVRアプリケーション
  • Meta Quest 3 による視覚提示
  • 3Dプリントした筐体とぬいぐるみ内部への搭載

通信構成

text
9軸センサ × 7
   ↓ I2C
マルチプレクサ
   ↓ I2C
XIAO ESP32-C6 (マイコン)
   ↓ UDP
PC (Unity)
   ↓
Meta Quest 3 HMD

ハードウェア構成

  • センサ群は I2C で集約されます
  • マイコンがセンサデータを PC に送信します
  • PC 上の Unity でアバターの姿勢と動作を更新します
  • HMD によってユーザーは VR 空間でアバターを視覚的に確認します

メイン基板 センサ基板

使用技術

  • Unity(VRアプリケーション開発、アバター制御)
  • Arduino IDE / XIAO ESP32-C6(センサデータの取得、PCへのデータ送信)
  • KiCad(基板作成)
  • Meta Quest 3(ユーザーへの視覚提示)
  • Fusion360 / Bamboo Studio(筐体のモデリング、3Dプリンター印刷)

通信方式

本システムでは、センサデータを PC へ送信するために UDP 通信を採用しています。

  • 通信方式: UDP
  • 通信対象: マイコンボード → PC
  • 役割: 9軸センサの姿勢情報をリアルタイムに送信し、Unityでアバター制御に反映
  • 特徴: 低遅延・ワイヤレス・リアルタイム操作に適している

センサデータはI2Cでマルチプレクサ経由で収集され、ESP32-C6側でパケット化されたのち、Unityへ送信されます。

ハードウェア詳細

センサ配置

本システムでは7箇所に9軸センサを配置しています。

  • 頭部
  • 右上腕
  • 右前腕
  • 左上腕
  • 左前腕
  • 胴体
  • 追加の計測部位(実装に応じて可変)

基板と筐体

  • KiCad で設計したセンサ基板を使用
  • マルチプレクサにより複数のセンサを一括制御
  • 3Dプリントで筐体を作成し、ぬいぐるみの内部へ埋め込み
  • ぬいぐるみの内部にセンサユニットを埋め込み、見た目と操作性を両立

3Dプリントと製作例

  • 基板回路図と基板デザインを作成
  • 筐体をプリントして内部に組み込み
  • ぬいぐるみ内部へセンサー基板と配線を納めて完成

システムの流れ

  1. ぬいぐるみの各部位で姿勢が変化する
  2. 9軸センサがその変化を計測する
  3. マルチプレクサを介してマイコンへ送信される
  4. XIAO ESP32-C6 が UDP で Unity 側へデータ送信する
  5. Unity が受信した姿勢情報をアバターの各部位へ適用する
  6. HMD を通じてユーザーは VR 空間で操作結果を確認する

実装上のポイント

  • センサの取り付け位置は、アバターの自然な動きと操作性を両立するように設計
  • ぬいぐるみ内部への埋め込みにより、見た目の違和感を抑制
  • アバターの動きは、姿勢角度をそのまま各ボーンへ反映するのではなく、必要に応じて補正や平滑化を行う
  • UDP の低遅延性を活かして、VR環境における直感的な操作を優先

実装ファイル

このリポジトリには、Unity側の操作スクリプトやシリアル/UDP関連の実装が含まれています。

  • Unity アプリケーション: PuppetManipulation_Software/
  • ハードウェア(基板、Arduino IDE、3Dプリンタデータなど): PuppetManipulation_Hardware/
  • センサ制御と通信: Assets/ 配下のスクリプト群
  • キャラクター制御: Assets/Scripts/Puppet/ など

セットアップ

必要な環境

  • Unity
  • Meta Quest 3
  • XIAO ESP32-C6
  • Arduino IDE
  • KiCad(基板改造時)
  • 3Dプリンタ(筐体作成時)

基本的な手順

  1. このリポジトリをクローンする
  2. Unity プロジェクトを開く
  3. マイコンにセンサ制御プログラムを書き込む
  4. ぬいぐるみにセンサユニットを取り付ける
  5. Unity 実行時に UDP 接続を確認する
  6. VR 空間でアバターが動くことを確認する

Parts

2
QtyValueFootprintReferences
1Conn_01x04_SocketConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ1
1~Package_DIP:DIP-8_W7.62mmU1

More from Atsuko-Otsuka/PuppetManipulation

6
  • 2 layers58.4 × 76.2 mmXiaoTcaBno ver2, the printed circuit board in 3D

    XiaoTcaBno ver2

    Atsuko-Otsuka/PuppetManipulation

    28 parts
  • 2 layers109.2 × 139.7 mmRasPiMulti9jiku6, the printed circuit board in 3D

    RasPiMulti9jiku6

    Atsuko-Otsuka/PuppetManipulation

    22 parts
  • 2 layers40.6 × 78.7 mmRasPiBNO2, the printed circuit board in 3D

    RasPiBNO2

    Atsuko-Otsuka/PuppetManipulation

    7 parts
  • 2 layers78.7 × 114.3 mmRasPiMulti test, the printed circuit board in 3D

    RasPiMulti test

    Atsuko-Otsuka/PuppetManipulation

    7 parts
  • 2 layers30.5 × 25.4 mm9jikuwithR, the printed circuit board in 3D

    9jikuwithR

    Atsuko-Otsuka/PuppetManipulation

    4 parts

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the BNO055only PCB?

It measures 17.8 × 22.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BNO055only use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BNO055only KiCad files?

From the Atsuko-Otsuka/PuppetManipulation repository on GitHub, at the commit this page was made from: the board is PuppetManipulation_Hardware/Kiban/BNO055only/BNO055only.kicad_pcb and its schematic PuppetManipulation_Hardware/Kiban/9jikuwithR/9jikuwithR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BNO055only design in my own project?

Its repository states no licence, so its author keeps all rights: ask Atsuko-Otsuka before reusing the design.