Skip to the content
2 layers58.4 × 76.2 mmXiaoTcaBno ver2, the printed circuit board in 3D
Size
58.4 × 76.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
46
Pads
120
Tracks, vias
214, 29
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Apr 2026
Updated
3 Oct 2026

Overview

XiaoTcaBno ver2 is an open-source printed circuit board by Atsuko-Otsuka, from the Atsuko-Otsuka/PuppetManipulation repository on GitHub. It is a 2-layer board of 58.4 × 76.2 mm with 28 parts on 46 nets, routed with 214 tracks and 29 vias.

Its parts include 12 resistors, 8 capacitors, 5 connectors and 3 ICs. It belongs with the ESP32 and RISC-V boards of this library.

README

README.md

VRぬいぐるみアバター操作システム

ぬいぐるみの身体動作を用いてVR空間のアバターを操作するシステムです。ユーザーがぬいぐるみを「触る」「動かす」ことで、アバターに直感的な身体表現を与えます。全身ボディトラッキングのような装着負担を抑えながら、手軽に自然な操作を実現することを目指しています。

概要

背景

VR空間におけるアバター操作は普及が進む一方で、従来の手法には次のような課題がありました。

  • 全身ボディトラッキングでは、ユーザー自身の身体動作をそのまま反映できる一方で、装着や長時間の運用に伴う身体的負担が大きい
  • ボタン式コントローラでは、比較的手軽に操作できる一方で、入力とアバターの動作が一致せず、身体としての直感的な操作が難しい

提案

本システムでは、これらの課題を同時に解決するために「ぬいぐるみ」をインターフェースとして採用しました。

ぬいぐるみを用いることで、ユーザーは自然な身体動作をそのままアバター操作に転写できます。これにより、最小限の身体負荷で思い通りの動作を実現しつつ、ユーザーの心理的ハードルを下げることができます。特に、ぬいぐるみを媒介にすることで、キャラクターになりきって大胆で愛らしい動作を自然に引き出すことが可能になります。

システム構成

フロー図

主要な構成

  • 9軸センサ(頭部、両上腕、両前腕、胴体)
  • マルチプレクサ(I2C通信)
  • XIAO ESP32-C6 マイコン
  • Unity ベースのVRアプリケーション
  • Meta Quest 3 による視覚提示
  • 3Dプリントした筐体とぬいぐるみ内部への搭載

通信構成

text
9軸センサ × 7
   ↓ I2C
マルチプレクサ
   ↓ I2C
XIAO ESP32-C6 (マイコン)
   ↓ UDP
PC (Unity)
   ↓
Meta Quest 3 HMD

ハードウェア構成

  • センサ群は I2C で集約されます
  • マイコンがセンサデータを PC に送信します
  • PC 上の Unity でアバターの姿勢と動作を更新します
  • HMD によってユーザーは VR 空間でアバターを視覚的に確認します

メイン基板 センサ基板

使用技術

  • Unity(VRアプリケーション開発、アバター制御)
  • Arduino IDE / XIAO ESP32-C6(センサデータの取得、PCへのデータ送信)
  • KiCad(基板作成)
  • Meta Quest 3(ユーザーへの視覚提示)
  • Fusion360 / Bamboo Studio(筐体のモデリング、3Dプリンター印刷)

通信方式

本システムでは、センサデータを PC へ送信するために UDP 通信を採用しています。

  • 通信方式: UDP
  • 通信対象: マイコンボード → PC
  • 役割: 9軸センサの姿勢情報をリアルタイムに送信し、Unityでアバター制御に反映
  • 特徴: 低遅延・ワイヤレス・リアルタイム操作に適している

センサデータはI2Cでマルチプレクサ経由で収集され、ESP32-C6側でパケット化されたのち、Unityへ送信されます。

ハードウェア詳細

センサ配置

本システムでは7箇所に9軸センサを配置しています。

  • 頭部
  • 右上腕
  • 右前腕
  • 左上腕
  • 左前腕
  • 胴体
  • 追加の計測部位(実装に応じて可変)

基板と筐体

  • KiCad で設計したセンサ基板を使用
  • マルチプレクサにより複数のセンサを一括制御
  • 3Dプリントで筐体を作成し、ぬいぐるみの内部へ埋め込み
  • ぬいぐるみの内部にセンサユニットを埋め込み、見た目と操作性を両立

3Dプリントと製作例

  • 基板回路図と基板デザインを作成
  • 筐体をプリントして内部に組み込み
  • ぬいぐるみ内部へセンサー基板と配線を納めて完成

システムの流れ

  1. ぬいぐるみの各部位で姿勢が変化する
  2. 9軸センサがその変化を計測する
  3. マルチプレクサを介してマイコンへ送信される
  4. XIAO ESP32-C6 が UDP で Unity 側へデータ送信する
  5. Unity が受信した姿勢情報をアバターの各部位へ適用する
  6. HMD を通じてユーザーは VR 空間で操作結果を確認する

実装上のポイント

  • センサの取り付け位置は、アバターの自然な動きと操作性を両立するように設計
  • ぬいぐるみ内部への埋め込みにより、見た目の違和感を抑制
  • アバターの動きは、姿勢角度をそのまま各ボーンへ反映するのではなく、必要に応じて補正や平滑化を行う
  • UDP の低遅延性を活かして、VR環境における直感的な操作を優先

実装ファイル

このリポジトリには、Unity側の操作スクリプトやシリアル/UDP関連の実装が含まれています。

  • Unity アプリケーション: PuppetManipulation_Software/
  • ハードウェア(基板、Arduino IDE、3Dプリンタデータなど): PuppetManipulation_Hardware/
  • センサ制御と通信: Assets/ 配下のスクリプト群
  • キャラクター制御: Assets/Scripts/Puppet/ など

セットアップ

必要な環境

  • Unity
  • Meta Quest 3
  • XIAO ESP32-C6
  • Arduino IDE
  • KiCad(基板改造時)
  • 3Dプリンタ(筐体作成時)

基本的な手順

  1. このリポジトリをクローンする
  2. Unity プロジェクトを開く
  3. マイコンにセンサ制御プログラムを書き込む
  4. ぬいぐるみにセンサユニットを取り付ける
  5. Unity 実行時に UDP 接続を確認する
  6. VR 空間でアバターが動くことを確認する

Parts

28
QtyValueFootprintReferences
12RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14
7CCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C2, C3, C4, C5, C6, C7
5Conn_01x04_SocketConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ2, J3, J4, J5, J6
1CCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC8
1XIAO-ESP32-C6XIAO_Series_Footprints:XIAO-ESP32-C6-DIPU1
1~myLib:TCA9548AU2
1~Package_DIP:DIP-8_W7.62mmU4

More from Atsuko-Otsuka/PuppetManipulation

6
  • 2 layers109.2 × 139.7 mmRasPiMulti9jiku6, the printed circuit board in 3D

    RasPiMulti9jiku6

    Atsuko-Otsuka/PuppetManipulation

    22 parts
  • 2 layers40.6 × 78.7 mmRasPiBNO2, the printed circuit board in 3D

    RasPiBNO2

    Atsuko-Otsuka/PuppetManipulation

    7 parts
  • 2 layers78.7 × 114.3 mmRasPiMulti test, the printed circuit board in 3D

    RasPiMulti test

    Atsuko-Otsuka/PuppetManipulation

    7 parts
  • 2 layers30.5 × 25.4 mm9jikuwithR, the printed circuit board in 3D

    9jikuwithR

    Atsuko-Otsuka/PuppetManipulation

    4 parts
  • 2 layers17.8 × 22.9 mmBNO055only, the printed circuit board in 3D

    BNO055only

    Atsuko-Otsuka/PuppetManipulation

    2 parts

Similar boards

  • 2 layers44.5 × 72.7 mmOSO SWAT C1-jig, the printed circuit board in 3D

    OSO SWAT C1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    28 parts2.1k
  • 2 layers95 × 54 mmEinkPDA screen, the printed circuit board in 3D

    EinkPDA screen

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    28 parts2kApache-2.0
  • 2 layers45 × 45 mmSmartbuttons, the printed circuit board in 3D

    Smartbuttons

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    28 parts915
  • 2 layers24.1 × 36.2 mmEsp32miniBT, the printed circuit board in 3D

    Esp32miniBT

    asterics/esp32_mouse_keyboard

    ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)

    28 parts911GPL-3.0
  • 2 layers34.8 × 12.2 mmInfnoise goldfingers, the printed circuit board in 3D

    Infnoise goldfingers

    waywardgeek/infnoise

    The world's easiest TRNG to get right

    28 parts854CC0-1.0
  • 2 layers55.9 × 99.1 mmStm32f0 disco Luos shield, the printed circuit board in 3D

    Stm32f0 disco Luos shield

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    28 parts546MIT
  • 2 layers88 × 25 mmEleLab v2 Frontpanel a, the printed circuit board in 3D

    EleLab v2 Frontpanel a

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    28 parts531GPL-3.0

Questions

How big is the XiaoTcaBno ver2 PCB?

It measures 58.4 × 76.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the XiaoTcaBno ver2 use?

28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the XiaoTcaBno ver2 KiCad files?

From the Atsuko-Otsuka/PuppetManipulation repository on GitHub, at the commit this page was made from: the board is PuppetManipulation_Hardware/Kiban/XiaoTcaBno_ver2/XiaoTcaBno_ver2.kicad_pcb and its schematic PuppetManipulation_Hardware/Kiban/9jikuwithR/9jikuwithR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the XiaoTcaBno ver2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Atsuko-Otsuka before reusing the design.