Skip to the content
4 layers37.6 × 39.9 mmServo drive, the printed circuit board in 3D

SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀

Size
37.6 × 39.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
125
Nets
99
Pads
443
Tracks, vias
1,144, 252
Pours
39
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
24 Jan 2024
Updated
11 Apr 2025

Overview

Servo drive is an open-source printed circuit board by atopile, from the atopile/spin-servo-drive repository on GitHub, published under the MIT licence. It is a 4-layer board of 37.6 × 39.9 mm with 125 parts on 99 nets, routed with 1,144 tracks and 252 vias.

Its parts include 50 capacitors, 37 resistors, 37 ICs and 1 connector. It belongs with the robots and motor control boards of this library.

README

README.md

Servos are dope.

Compared to the steppers we stick on our 3D printers, CNC machines and paintball turrets:

  • They're way faster 🏃
  • Far more powerful (higher torque for longer) 💪
  • More accurate (higher resolution) 🎯
  • And they're closed loop (they know where they are) 🤖

The only downside is that they're expensive, like hundreds of dollars.

Introducing spin ✨ - the $30 servo for the masses (designed with atopile)

spin

Wiggle wiggle wiggle

wiggle-wiggle-wiggle

Build your own Spin Servo Motor Drive

This project is fully open source and designed with atopile, a new language and compiler to design electronics with code.

Goals + (default) Specs

  • Obviously better option than stepper motors for 3D printers, CNC machines and robotics

  • Open-source design that is easy to:

    • contribute to
    • fork maintainable derivatives of
    • robust
  • 2x CAN comms with JST-GH connectors

  • XT30 power connector

  • 0.25Nm continuous rated torque (0.75Nm peak)

  • <0.1° resolution

  • 12V-24V input voltage

Getting started

This project was written in ato, a new electronics description language we are developing to help create and share electronic designs. Get started here: https://atopile.io/

Electronics

Write me please!

Firmware

Install PlatformIO into VSCode. It has the utilities to build, upload and debug the firmware.

You may also need to install libusb (eg. brew install libusb on OSx) to run the build!

There are a few build configurations:

  • debug is intended as a JTAG configuration and includes symbols to run the debugger.
  • dfu-manual uses the GNU command-line dfu-utility to trigger the upload via USB (Recommended USB workflow)
  • dfu uses the built-in PlatformIO dfu utility to program via USB (which I struggled with on OSx)

To run a build either use the sidebar (easiest IMO) or PlatformIO CLI (pio run --help).

Side-bar

platformio

CLI

platformio-cli

Parts

125
QtyValueFootprintReferences
19lib:C0805C3, C4, C20, C21, C22, C25, C26, C27, C29, C30, C35, C36, C37, C38, C39, C47 +3
1125V 1uF X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C5, C7, C9, C14, C15, C33, C34, C41, C43, C45, C50
1016V 100nF X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C2, C13, C16, C17, C18, C19, C24, C28, C40, C51
762.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R2, R6, R13, R25, R44, R48, R50
6lib:NetTie-2_SMD_Pad0.25mmU17, U19, U31, U33, U34, U35
662.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 47kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R12, R14, R26, R45, R49, R51
4lib:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BRU4, U20, U21, U24
462.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 10kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R1, R15, R20, R38
3lib:OutputPadU7, U8, U9
3lib:V-DFN3030-8K_L3.0-W3.0-P0.65-BLU1, U3, U28
316V 4.7uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0603C23, C31, C32
33mΩ +/- 1%lib:R0805R4, R8, R47
350V 2.2nF X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C10, C11, C12
362.5mW Thick Film Resistors 50V -200ppm/℃~+500ppm/℃ ±1% 6.04Ω 0402 Chip Resistor - Surface Mount ROHSlib:R0402R16, R46, R52
2lib:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BLU22, U23
2lib:CONN-TH_XT30PW-MU2, U14
2lib:SOD-323_L1.8-W1.3-LS2.5-RDU30, U36
2lib:LED-SMD_4P-L4.0-W1.4_SK6805SIDE-SU5, U32
2lib:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BRU6, U18
2lib:CONN-SMD_4P-P1.25_SM04B-GHS-TB-LF-SNU26, U27
250V 22pF C0G ±5% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C42, C44
262.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 5.1kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R5, R9
1lib:TSSOP-16_L5.0-W4.4-P0.65-LS6.4-BLU29
1lib:IND-SMD_L4.0-W4.0U10
1lib:UFQFPN-48_L7.0-W7.0-P0.50-BL-EPU13
1lib:CONN-SMD_4P-P1.00_SM04B-SRSS-TB-LF-SNU15
1lib:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BLU25
1lib:USB-C-SMD_KH-TYPE-C-16PJ1
1lib:TAG-CONNECT_TC2050-IDCU16
1lib:OSC-SMD_4P-L3.2-W2.5-BLU37
1lib:KEY-SMD_SKTDLDE010U11
1lib:VQFN-24_L4.0-W4.0-P0.50-TL-EP2.5U12
110V 10uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0603C1
110kohm +/- 1%lib:R0402R19
125V 10uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0805C8
162.5mW Thick Film Resistors 50V ±1% ±200ppm/℃ 6.34kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R18
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 100kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R3
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 11.5kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R21
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 20.5kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R17
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 200Ω 0402 Chip Resistor - Surface Mount ROHSlib:R0402R7
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 27.4kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R10
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 3kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R11
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 4.3kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R30
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 41.2kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R29
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 43kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R31
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 6.2kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R22

More from atopile/spin-servo-drive

6
  • 2 layers225.7 × 100.8 mmDrv8300, the printed circuit board in 3D

    Drv8300

    atopile/spin-servo-drive

    SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀

    15 parts130MIT
  • 2 layers225.7 × 100.8 mmLdk220m r, the printed circuit board in 3D

    Ldk220m r

    atopile/spin-servo-drive

    SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀

    5 parts130MIT
  • 2 layers225.7 × 100.8 mmSaleae header, the printed circuit board in 3D

    Saleae header

    atopile/spin-servo-drive

    SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀

    5 parts130MIT
  • 2 layers225.7 × 100.8 mmMa732, the printed circuit board in 3D

    Ma732

    atopile/spin-servo-drive

    SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀

    2 parts130MIT
  • 2 layers225.7 × 100.8 mmSk6805side, the printed circuit board in 3D

    Sk6805side

    atopile/spin-servo-drive

    SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀

    2 parts130MIT
  • 2 layers225.7 × 100.8 mmSn65hvd230dr, the printed circuit board in 3D

    Sn65hvd230dr

    atopile/spin-servo-drive

    SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀

    2 parts130MIT

Similar boards

  • 4 layers38 × 38 mmMoteus c1, the printed circuit board in 3D

    Moteus c1

    mjbots/moteus

    Brushless DC motor controller

    125 parts1.4kApache-2.0
  • 4 layers35 × 110 mmEurorack pmod pcb, the printed circuit board in 3D

    Eurorack pmod pcb

    apfaudio/eurorack-pmod

    A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.

    125 parts241
  • 4 layers70 × 70 mmBAGEL MK1.1-Butter, the printed circuit board in 3D

    BAGEL MK1.1-Butter

    ISSUIUC/ISS-PCB

    Building custom flight computers

    125 parts33
  • 4 layers104 × 69.4 mmDock, the printed circuit board in 3D

    Dock

    gamebub/gamebub-pcb

    PCB design files for the Game Bub project

    125 parts31CERN-OHL-S-2.0
  • 4 layers140.3 × 101.7 mmSheet1, the printed circuit board in 3D

    Sheet1

    horychen/ProjectEureka

    12 phase motor drive including inverter, microcontroller-mother-board, sensing, communication, DAC, etc.

    125 parts17GPL-3.0
  • 4 layers109.2 × 47 mmArty a7-expansion, the printed circuit board in 3D

    Arty a7-expansion

    antmicro/arty-expansion-board

    IO expansion board compatible with Digilent Arty A7

    125 parts14Apache-2.0
  • 4 layers88.4 × 63.6 mmCompute, the printed circuit board in 3D

    Compute

    hstarmans/firestarter

    Kicad design files for prism laser direct imager using up5k FPGA and ESP32

    125 parts13
  • 4 layers53.4 × 49 mmRoboMotor GIM6010-V2, the printed circuit board in 3D

    RoboMotor GIM6010-V2

    baoqi-zhong/RoboMotor

    A fully open-sourced motor controller project

    125 parts6MIT

Questions

How big is the Servo drive PCB?

It measures 37.6 × 39.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Servo drive use?

125 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Servo drive KiCad files?

From the atopile/spin-servo-drive repository on GitHub, at the commit this page was made from: the board is elec/layout/default/servo-drive.kicad_pcb and its schematic elec/layout/default/servo-drive.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Servo drive design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).