Skip to the content
2 layersUsb uart bridge, the printed circuit board in 3D

Usb uart bridge

atopile/hil29

Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
27
Pads
41
Tracks, vias
39, 8
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Jan 2025
Updated
22 May 2025

Overview

Usb uart bridge is an open-source printed circuit board by atopile, from the atopile/hil repository on GitHub, published under the MIT licence. It is a 2-layer board with 7 parts on 27 nets, routed with 39 tracks and 8 vias.

Its parts include 4 capacitors, 2 resistors and 1 IC. It belongs with the interfaces and adapters boards of this library.

README

README.md

Hardware Test 🧪 for Happy Engineers, PMs and CTOs

Hardware-in-the-Loop, or HiL (sometimes HitL), is a way to continuously validate your hardware and firmware together. By connecting actual hardware to virtual test scenarios, HiL enables thorough testing of embedded systems, control units, and firmware under realistic conditions without the risks and costs of full physical testing.

HiL testing catches integration issues early, accelerates development cycles, and ensures robust system performance before deployment. Typically the domain of the most sophisticated automotive and aerospace companies, this HiL suite is now for all 🚀.

Usage

If you haven't already, get atopile and run through the quickstart and tutorial.

This suite is intended to be used as a dependency on your project. So, create a new project (ato create project) and add this suite as a dependency (ato install https://github.com/atopile/hil)

Parts

7
QtyValueFootprintReferences
2100nF ±10% 16V X7Ratopile:C0402-b3ef17C1, C3
1atopile:WQFN-28_L5.0-W5.0-P0.50-BL-EP3.2-79d8c5U1
110kΩ ±1% 62.5mWatopile:R0402-56259eR1
11µF ±10% 25V X5Ratopile:C0402-b3ef17C2
14.7kΩ ±1% 62.5mWatopile:R0402-56259eR2
14.7µF ±20% 10V X5Ratopile:C0402-b3ef17C4

More from atopile/hil

12
  • 6 layers415 × 335 mmSpace bms hil, the printed circuit board in 3D

    Space bms hil

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    1,742 parts29MIT
  • 6 layers195.1 × 202.2 mmCellsim-16ch, the printed circuit board in 3D

    Cellsim-16ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    1,464 parts29MIT
  • 4 layers28 × 20 mmCellsim-8ch, the printed circuit board in 3D

    Cellsim-8ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    608 parts29MIT
  • 6 layers122 × 100 mmCanjay, the printed circuit board in 3D

    Canjay

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    153 parts29MIT
  • 4 layers1.5 × 9.6 mmHil core, the printed circuit board in 3D

    Hil core

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    114 parts29MIT
  • 4 layers29.7 × 28.3 mmThermistor-8ch, the printed circuit board in 3D

    Thermistor-8ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    78 parts29MIT
  • 6 layersBuck boost, the printed circuit board in 3D

    Buck boost

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    69 parts29MIT
  • 4 layersCell, the printed circuit board in 3D

    Cell

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    64 parts29MIT
  • 2 layers48.1 × 19.2 mmBlack magic probe, the printed circuit board in 3D

    Black magic probe

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    61 parts29MIT
  • 2 layersBlack magic debugger, the printed circuit board in 3D

    Black magic debugger

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    52 parts29MIT
  • 2 layers32.3 × 64.4 mmMicro vault dev board, the printed circuit board in 3D

    Micro vault dev board

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    41 parts29MIT
  • 2 layersEthernet, the printed circuit board in 3D

    Ethernet

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    32 parts29MIT

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

What parts does the Usb uart bridge use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usb uart bridge KiCad files?

From the atopile/hil repository on GitHub, at the commit this page was made from: the board is elec/layout/usb-uart-bridge/usb-uart-bridge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usb uart bridge design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).