Skip to the content
2 layersRegulator, the printed circuit board in 3D

Regulator

atopile/hil29

Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
11
Pads
43
Tracks, vias
60, 36
Pours
8
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
24 Jan 2025
Updated
22 May 2025

Overview

Regulator is an open-source printed circuit board by atopile, from the atopile/hil repository on GitHub, published under the MIT licence. It is a 2-layer board with 14 parts on 11 nets, routed with 60 tracks and 36 vias.

Its parts include 7 capacitors, 4 resistors, 1 IC, 1 diode and 1 inductor. It belongs with the power boards of this library.

README

README.md

Hardware Test 🧪 for Happy Engineers, PMs and CTOs

Hardware-in-the-Loop, or HiL (sometimes HitL), is a way to continuously validate your hardware and firmware together. By connecting actual hardware to virtual test scenarios, HiL enables thorough testing of embedded systems, control units, and firmware under realistic conditions without the risks and costs of full physical testing.

HiL testing catches integration issues early, accelerates development cycles, and ensures robust system performance before deployment. Typically the domain of the most sophisticated automotive and aerospace companies, this HiL suite is now for all 🚀.

Usage

If you haven't already, get atopile and run through the quickstart and tutorial.

This suite is intended to be used as a dependency on your project. So, create a new project (ato create project) and add this suite as a dependency (ato install https://github.com/atopile/hil)

Parts

14
QtyValueFootprintReferences
510µF ±10% 25V X5Ratopile:C0805-3b2e55C2, C3, C4, C5, C6
1atopile:VQFN-16_L3.0-W3.0-P0.50-BL-EP1.7-62c35aU1
1atopile:SMC_L7.1-W6.2-LS8.1-RD-d9649dD1
1atopile:IND-SMD_L7.1-W6.6-48b69fL1
110kΩ ±1% 62.5mWatopile:R0402-56259eR1
1180kΩ ±1% 62.5mWatopile:R0402-56259eR2
12.7kΩ ±1% 62.5mWatopile:R0402-56259eR3
14.7µF ±20% 6.3V X5Ratopile:C0402-b3ef17C7
16.8nF ±10% 50V X7Ratopile:C0402-b3ef17C1
175kΩ ±1% 62.5mWatopile:R0402-56259eR4

More from atopile/hil

12
  • 6 layers415 × 335 mmSpace bms hil, the printed circuit board in 3D

    Space bms hil

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    1,742 parts29MIT
  • 6 layers195.1 × 202.2 mmCellsim-16ch, the printed circuit board in 3D

    Cellsim-16ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    1,464 parts29MIT
  • 4 layers28 × 20 mmCellsim-8ch, the printed circuit board in 3D

    Cellsim-8ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    608 parts29MIT
  • 6 layers122 × 100 mmCanjay, the printed circuit board in 3D

    Canjay

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    153 parts29MIT
  • 4 layers1.5 × 9.6 mmHil core, the printed circuit board in 3D

    Hil core

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    114 parts29MIT
  • 4 layers29.7 × 28.3 mmThermistor-8ch, the printed circuit board in 3D

    Thermistor-8ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    78 parts29MIT
  • 6 layersBuck boost, the printed circuit board in 3D

    Buck boost

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    69 parts29MIT
  • 4 layersCell, the printed circuit board in 3D

    Cell

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    64 parts29MIT
  • 2 layers48.1 × 19.2 mmBlack magic probe, the printed circuit board in 3D

    Black magic probe

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    61 parts29MIT
  • 2 layersBlack magic debugger, the printed circuit board in 3D

    Black magic debugger

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    52 parts29MIT
  • 2 layers32.3 × 64.4 mmMicro vault dev board, the printed circuit board in 3D

    Micro vault dev board

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    41 parts29MIT
  • 2 layersEthernet, the printed circuit board in 3D

    Ethernet

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    32 parts29MIT

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

What parts does the Regulator use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Regulator KiCad files?

From the atopile/hil repository on GitHub, at the commit this page was made from: the board is elec/layout/regulator/regulator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Regulator design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).