Skip to the content
2 layersEthernet, the printed circuit board in 3D

Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
33
Pads
126
Tracks, vias
180, 22
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
24 Jan 2025
Updated
22 May 2025

Overview

Ethernet is an open-source printed circuit board by atopile, from the atopile/hil repository on GitHub, published under the MIT licence. It is a 2-layer board with 32 parts on 33 nets, routed with 180 tracks and 22 vias.

Its parts include 16 capacitors, 13 resistors and 3 ICs. It belongs with the interfaces and adapters boards of this library.

README

README.md

Hardware Test 🧪 for Happy Engineers, PMs and CTOs

Hardware-in-the-Loop, or HiL (sometimes HitL), is a way to continuously validate your hardware and firmware together. By connecting actual hardware to virtual test scenarios, HiL enables thorough testing of embedded systems, control units, and firmware under realistic conditions without the risks and costs of full physical testing.

HiL testing catches integration issues early, accelerates development cycles, and ensures robust system performance before deployment. Typically the domain of the most sophisticated automotive and aerospace companies, this HiL suite is now for all 🚀.

Usage

If you haven't already, get atopile and run through the quickstart and tutorial.

This suite is intended to be used as a dependency on your project. So, create a new project (ato create project) and add this suite as a dependency (ato install https://github.com/atopile/hil)

Parts

32
QtyValueFootprintReferences
6100nF ±10% 16V X7Ratopile:C0402-b3ef17C8, C9, C10, C11, C12, C13
433Ω ±1% 62.5mWatopile:R0402-56259eR3, R4, R8, R9
449.9Ω ±1% 62.5mWatopile:R0402-56259eR5, R6, R10, R11
210nF ±10% 50V X7Ratopile:C0402-b3ef17C5, C6
210pF ±5% 50V C0Gatopile:C0402-b3ef17C15, C16
2220Ω ±1% 62.5mWatopile:R0402-56259eR1, R2
26.8nF ±10% 50V X7Ratopile:C0402-b3ef17C3, C4
1lib:RJ45-TH_J1B1211CCDU2
1lib:LQFP-48_L7.0-W7.0-P0.50-LS9.0-BLU1
1lib:CRYSTAL-SMD_4P-L3.2-W2.5-BLU3
110µF ±10% 25V X5Ratopile:C0805-3b2e55C14
110Ω ±1% 62.5mWatopile:R0402-56259eR7
112.4kΩ ±1% 62.5mWatopile:R0402-56259eR12
11MΩ ±1% 62.5mWatopile:R0402-56259eR13
11nF ±10% 50V X7Ratopile:C0805-3b2e55C1
122nF ±10% 50V X7Ratopile:C0402-b3ef17C2
14.7µF ±10% 10V X5Ratopile:C0402-b3ef17C7

More from atopile/hil

12
  • 6 layers415 × 335 mmSpace bms hil, the printed circuit board in 3D

    Space bms hil

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    1,742 parts29MIT
  • 6 layers195.1 × 202.2 mmCellsim-16ch, the printed circuit board in 3D

    Cellsim-16ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    1,464 parts29MIT
  • 4 layers28 × 20 mmCellsim-8ch, the printed circuit board in 3D

    Cellsim-8ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    608 parts29MIT
  • 6 layers122 × 100 mmCanjay, the printed circuit board in 3D

    Canjay

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    153 parts29MIT
  • 4 layers1.5 × 9.6 mmHil core, the printed circuit board in 3D

    Hil core

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    114 parts29MIT
  • 4 layers29.7 × 28.3 mmThermistor-8ch, the printed circuit board in 3D

    Thermistor-8ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    78 parts29MIT
  • 6 layersBuck boost, the printed circuit board in 3D

    Buck boost

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    69 parts29MIT
  • 4 layersCell, the printed circuit board in 3D

    Cell

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    64 parts29MIT
  • 2 layers48.1 × 19.2 mmBlack magic probe, the printed circuit board in 3D

    Black magic probe

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    61 parts29MIT
  • 2 layersBlack magic debugger, the printed circuit board in 3D

    Black magic debugger

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    52 parts29MIT
  • 2 layers32.3 × 64.4 mmMicro vault dev board, the printed circuit board in 3D

    Micro vault dev board

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    41 parts29MIT
  • 2 layers28 × 20 mmMicro vault, the printed circuit board in 3D

    Micro vault

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    26 parts29MIT

Similar boards

  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    32 parts1kGPL-3.0
  • 2 layers136.8 × 54.2 mmRetropie zero, the printed circuit board in 3D

    Retropie zero

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    32 parts915
  • 2 layersMooltipass top, the printed circuit board in 3D

    Mooltipass top

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    32 parts531
  • 2 layers16 × 20 mmESPKey, the printed circuit board in 3D

    ESPKey

    octosavvi/ESPKey

    Wiegand data logger, replay device and micro door-controller

    32 parts353GPL-2.0
  • 2 layers82 × 40.9 mmDisplay7447, the printed circuit board in 3D

    Display7447

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    32 parts269
  • 2 layers40 × 38 mmShield, the printed circuit board in 3D

    Shield

    murexrobotics/electrical

    Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

    32 parts192MIT
  • 2 layers47 × 39 mmQrss clock tx, the printed circuit board in 3D

    Qrss clock tx

    swharden/AVR-projects

    A collection of standalone AVR projects written in C

    32 parts184MIT
  • 2 layers30.9 × 63 mmStm32-io extend, the printed circuit board in 3D

    Stm32-io extend

    hardenedlinux/cheap-pcb

    Cheap PCB: Better understanding the current status of hardware supply chain

    32 parts170CC0-1.0

Questions

What parts does the Ethernet use?

32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ethernet KiCad files?

From the atopile/hil repository on GitHub, at the commit this page was made from: the board is elec/layout/ethernet/ethernet.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ethernet design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).