

Revision 2
Contains some PCBs by Atharva.
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 37
- Pads
- 104
- Tracks, vias
- 178, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Mar 2026
- Updated
- 3 Mar 2026
Overview
Revision 2 is an open-source printed circuit board by Athyo30, from the Athyo30/PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 23 parts on 37 nets, routed with 178 tracks and 12 vias.
It is built around the ATMEGA328-PU. Its parts include 8 resistors, 4 capacitors, 2 connectors, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdPCB
Contains some PCBs by Atharva.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R_US | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R4, R5, R6, R7, R8 |
| 4 | C | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2, C3, C4 |
| 3 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3386C_Horizontal | RV1, RV2, RV3 |
| 2 | 5K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R1, R3 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R2 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | Conn_01x01_Pin | Connector:Banana_Jack_1Pin | J1 |
| 1 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | Crystal | Crystal:Crystal_HC52-U_Vertical | Y1 |
| 1 | LED | LED_THT:LED_D5.0mm_Horizontal_O6.35mm_Z15.0mm | D1 |
| 1 | SW_Push_Dual | Button_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH2xxxxxxV2 | SW1 |
| 1 | WC1602A | Display:WC1602A | DS1 |
More from Athyo30/PCB
1- 4 layers60.4 × 46.1 mm

Similar boards
- 2 layers104.9 × 75.2 mm

- 2 layers228 × 98 mm

- 2 layers94.6 × 46.1 mm

- 2 layers50 × 50 mm

- 2 layers284.7 × 94.2 mm

Lumberjack
peej/lumberjack-keyboard
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
165 parts403MIT - 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers63.3 × 57.2 mm

- 2 layers285 × 117 mm

Questions
How big is the Revision 2 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Revision 2 use?
23 parts, built around the ATMEGA328-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Revision 2 KiCad files?
From the Athyo30/PCB repository on GitHub, at the commit this page was made from: the board is TempSensor/revision_2.kicad_pcb and its schematic SeniorDesign/GoldenForm_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Revision 2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).