Skip to the content
2 layers47 × 111.5 mmMacropad, the printed circuit board in 3D

custom 2x2 macropad

Size
47 × 111.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
40
Pads
66
Tracks, vias
74, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Aug 2026
Updated
6 Aug 2026

Overview

Macropad is an open-source printed circuit board by atharvarao123, from the atharvarao123/macropad repository on GitHub. It is a 2-layer board of 47 × 111.5 mm with 9 parts on 40 nets, routed with 74 tracks and 0 vias.

It is built around the ESP32-DEVKITC-VE. Its parts include 4 diodes, 4 switches and 1 IC. It belongs with the keyboards and input boards and the ESP32 boards of this library.

Main components

1

README

README.md

Macropad

Custom 2x2 Macropad designed in KiCad.

Hardware

  • ESP32 DevKitC
  • 2x2 (originally planned 3x3) mechanical switch matrix
  • 1N4148 diodes, one per switch, for anti-ghosting

Firmware (ESP-IDF)

Scans the matrix continuously, debounces with a combined state-check + time-window approach (needed since the scan loop runs way faster than a human can press a key), and logs row col over serial on every clean press.

PC-side listener (Python)

Reads the serial output, parses out the row/col pair, and dispatches to whatever action is mapped for that key . Is in communication/.

Images

PCB

PCB

Assembled Macropad Macropad

Parts

9
QtyValueFootprintReferences
41N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D4, D6
4SW_PushMacroPad:SW_MXSW1, SW2, SW4, SW5
1ESP32-DevKitCPCM_Espressif:ESP32-DevKitCU2

Similar boards

  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers115 × 75 mmSpinCoater, the printed circuit board in 3D

    SpinCoater

    RParkerE/OpenSilicon

    OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.

    11 parts55GPL-3.0
  • 2 layers127.3 × 54.1 mmESP32 SolarBox, the printed circuit board in 3D

    ESP32 SolarBox

    cole8888/SRNE-Solar-Charge-Controller-Monitor

    Read data from SRNE solar charge controllers.

    34 parts42
  • 2 layers62.2 × 57.1 mmWs2mqtt, the printed circuit board in 3D

    Ws2mqtt

    Tho85/ws2mqtt

    Connect WiSafe2 devices to Home Assistant

    8 parts28BSD-3-Clause
  • 2 layers99.9 × 99.9 mmSplit flap, the printed circuit board in 3D

    Split flap

    tinkermax/split-flap

    DIY mechanical spli-flap display

    28 parts13CC-BY-4.0
  • 2 layersJF ECU32, the printed circuit board in 3D

    JF ECU32

    JoachimF/JF-ECU32

    RC Jet Engine ECU

    27 parts12GPL-3.0
  • 2 layers72.5 × 84.8 mmDevboard, the printed circuit board in 3D

    Devboard

    ste2425/PSP-Bluetooth-AVConnector

    An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)

    13 parts12
  • 2 layers100 × 88.9 mmGen2, the printed circuit board in 3D

    Gen2

    Alignof/Juggernaut

    疑似時限爆弾解除競技

    41 parts10MIT

Questions

How big is the Macropad PCB?

It measures 47 × 111.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Macropad use?

9 parts, built around the ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Macropad KiCad files?

From the atharvarao123/macropad repository on GitHub, at the commit this page was made from: the board is macropad.kicad_pcb and its schematic macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Macropad design in my own project?

Its repository states no licence, so its author keeps all rights: ask atharvarao123 before reusing the design.