
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

custom 2x2 macropad
Macropad is an open-source printed circuit board by atharvarao123, from the atharvarao123/macropad repository on GitHub. It is a 2-layer board of 47 × 111.5 mm with 9 parts on 40 nets, routed with 74 tracks and 0 vias.
It is built around the ESP32-DEVKITC-VE. Its parts include 4 diodes, 4 switches and 1 IC. It belongs with the keyboards and input boards and the ESP32 boards of this library.
Custom 2x2 Macropad designed in KiCad.
Scans the matrix continuously, debounces with a combined state-check + time-window approach (needed since the scan loop runs way faster than a human can press a key), and logs row col over serial on every clean press.
Reads the serial output, parses out the row/col pair, and dispatches to whatever action is mapped for that key . Is in communication/.
PCB

Assembled Macropad

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D4, D6 |
| 4 | SW_Push | MacroPad:SW_MX | SW1, SW2, SW4, SW5 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U2 |

harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.

cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.




ste2425/PSP-Bluetooth-AVConnector
An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)

It measures 47 × 111.5 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the atharvarao123/macropad repository on GitHub, at the commit this page was made from: the board is macropad.kicad_pcb and its schematic macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask atharvarao123 before reusing the design.