

TrainShield
My design files. Abandon all hope ye who enter here.
- Size
- 73 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 37
- Pads
- 172
- Tracks, vias
- 515, 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
TrainShield is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 73 × 53.3 mm with 46 parts on 37 nets, routed with 515 tracks and 1 via.
It is built around the L293D. Its parts include 16 diodes, 8 connectors, 7 resistors, 4 capacitors and 3 ICs.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N4001 | Diodes_ThroughHole:Diode_DO-41_SOD81_Vertical_AnodeUp | D2, D3, D4, D5, D6, D7, D8, D9 |
| 7 | LED | myFootPrints:LED-3MM | D10, D11, D12, D13, D14, D15, D16 |
| 6 | 330 | myFootPrints:Resistor_Horz | R2, R3, R4, R5, R6, R7 |
| 2 | CONN_01X03 | Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_3pol | P6, P7 |
| 2 | L293D | Housings_DIP:DIP-16_W7.62mm | U2, U3 |
| 2 | SW_PUSHBUTTON | myFootPrints:SW_PUSH_SMALL | SW1, SW2 |
| 2 | TERM_2 | myFootPrints:TERMx2 | P1, P3 |
| 2 | TERMx3 | myFootPrints:TERMx3 | P2, P4 |
| 1 | 0.1 uF | myFootPrints:C1 | C1 |
| 1 | 100uF | myFootPrints:C2 | C3 |
| 1 | 10uF | myFootPrints:C2 | C4 |
| 1 | 1N4001 | myFootPrints:1N4001 | D1 |
| 1 | 2K2 | myFootPrints:Resistor_Horz | R1 |
| 1 | 47uF | myFootPrints:C2 | C2 |
| 1 | 7805 | TO_SOT_Packages_THT:TO-220_Neutral123_Horizontal | U1 |
| 1 | ARDUINO_SHIELD | freetronics_footprints:ARDUINO_SHIELD | SHIELD1 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P5 |
| 1 | MB225rev | myFootPrints:MB225rev | VAL |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | POT | myFootPrints:BOURNS-PTA3043_30mm-slide-pot | RV1 |
| 1 | SW_PUSHBUTTON | SW_PUSH_SMALL | SW3 |
| 1 | val** | freetronics_footprints:1X01 | 1X01 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers178 × 145 mm

Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70 - 2 layers84.3 × 58.4 mm

EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers56.4 × 72.6 mm

Ras pi hat
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
8 parts13 - 2 layers87.5 × 70 mm

- 2 layers92.5 × 62.5 mm

DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 2 layers47.5 × 49.5 mm

- 2 layers120.7 × 184.1 mm

- 2 layers90 × 53.4 mm

Questions
How big is the TrainShield PCB?
It measures 73 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TrainShield use?
46 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TrainShield KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/train/trainShield/trainShield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TrainShield design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.