Skip to the content
2 layers53 × 26 mmPusher, the printed circuit board in 3D

My design files. Abandon all hope ye who enter here.

Size
53 × 26 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
9
Pads
39
Tracks, vias
90, 0
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Pusher is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 53 × 26 mm with 12 parts on 9 nets, routed with 90 tracks and 0 vias.

It is built around the L293D. Its parts include 6 connectors, 2 capacitors, 2 resistors, 1 IC and 1 fuse.

Main components

1

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

12
QtyValueFootprintReferences
210Kfootprints:R__P5.08mmR1, R3
2NPTHWire_Pads:SolderWirePad_single_2-5mmDrillJ14, J14
10.1uFfootprints:C_Disc_D3.4mm_W2.1mm_P2.50mmC3
11uFfootprints:C_Disc_D5.0mm_W2.5mm_P2.50mmC2
1BATTfootprints:TerminalBlock_bornier-2_P5.08mmJ15
1JAMfootprints:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ4
1L293Dfootprints:DIP-16_W7.62mmU2
1PSH_INfootprints:Molex_PicoBlade_53047-0510_05x1.25mm_StraightJ17
1PTCfootprints:Fuse_Littelfuse-LVR125F2
1PUSHERfootprints:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ3

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 2 layers178 × 145 mmUltra DB X51 v1, the printed circuit board in 3D

    Ultra DB X51 v1

    ExploreEmbedded/8051_DevelopmentBoard

    Design files and sample code for 8051 development Ultra Boards

    145 parts70
  • 2 layers84.3 × 58.4 mmEnocderDriver, the printed circuit board in 3D

    EnocderDriver

    NikodemBartnik/Small-Projects

    All of smaller projects (Arduino, PCBs, electronics, code)

    35 parts55
  • 2 layers56.4 × 72.6 mmRas pi hat, the printed circuit board in 3D

    Ras pi hat

    geno543/Redropi_highway

    the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…

    8 parts13
  • 2 layers87.5 × 70 mmLaberinto, the printed circuit board in 3D

    Laberinto

    CRM-UAM/CRMaze

    Open source robot for maze solving + line following

    34 parts12
  • 2 layers92.5 × 62.5 mmDropGenPCB, the printed circuit board in 3D

    DropGenPCB

    harrislab-brown/DropGen

    DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.

    25 parts12CC-BY-SA-4.0
  • 2 layers47.5 × 49.5 mmElectronic, the printed circuit board in 3D

    Electronic

    zosko/magspoof

    Magspoof with Arduino Pro Micro

    5 parts11
  • 2 layers120.7 × 184.1 mmBeachRover circuit, the printed circuit board in 3D

    BeachRover circuit

    wizardofrobots/roverCode

    Jetson Nano powered Arduino Rover

    11 parts10
  • 2 layers90 × 53.4 mmOpenOx, the printed circuit board in 3D

    OpenOx

    hacklabkyiv/openox-pcb

    PCB design for OpenOx - open source oxygen concentrator

    43 parts7GPL-3.0

Questions

How big is the Pusher PCB?

It measures 53 × 26 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pusher use?

12 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pusher KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Nerf/Ardu RapidStrike/design_files V05/pusher.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pusher design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.