Skip to the content
2 layers42 × 18 mmDesign files Charger V0.4, the printed circuit board in 3D

Design files Charger V0.4

aspro648/KiCad33

My design files. Abandon all hope ye who enter here.

Size
42 × 18 mm
Copper layers
2
Thickness
1.6 mm
Parts
71
Nets
29
Pads
160
Tracks, vias
203, 11
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Design files Charger V0.4 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 42 × 18 mm with 71 parts on 29 nets, routed with 203 tracks and 11 vias.

It is built around the MCP73833. Its parts include 23 connectors, 11 resistors, 8 diodes, 2 capacitors and 1 IC. It belongs with the power boards of this library.

Main components

1

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

71
QtyValueFootprintReferences
12Connfootprints:SolderWirePad_single_0-8mmDrillJ44, J45, J46, J47, J48, J49, J54, J55, J56, J57, J58, J59
7100footprints:R_0603R6, R7, R8, R9, R10, R11, R12
5LEDfootprints:PIN_HEADER_LEDJ1, J6, J7, J8, J9
4LEDfootprints:LED_PADSJ20, J21, J22, J23
4LEDfootprints:LED_0805_HandSolderingD20, D21, D22, D23
210Kfootprints:R_0603R4, R5
210uFfootprints:C_0805C1, C2
21Kfootprints:R_0603R2, R3
2UNDfootprints:LED_0805_HandSolderingD4, D5
1BATfootprints:JST_SH_SM02B-SRSS-TB_02x1.00mm_AngledJ3
1CHGfootprints:LED_0805_HandSolderingD2
1DONEfootprints:LED_0805_HandSolderingD3
1MCP73833footprints:MSOP-10_3x3mm_Pitch0.5mmU1
1MadeInOregonRev25footprints:MadeInOregonRev25VAL
1SW_SPDTfootprints:SPST_SMDSW1
1USB-MICROfootprints:USB_Micro-B_Molex-105017-0001J2

The 47 most common of 71 parts.

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 4 layers36 × 50.2 mmRacer, the printed circuit board in 3D

    Racer

    StuckAtPrototype/Racer

    These are structured into their own files. I could have used submodules, but decided against it.

    83 parts3.8kApache-2.0
  • 4 layers74.7 × 30 mmController, the printed circuit board in 3D

    Controller

    StuckAtPrototype/Thumbtroller

    77 parts305
  • 4 layers49 × 74.9 mmPCB business card, the printed circuit board in 3D

    PCB business card

    StuckAtPrototype/PCB_business_card_remake

    A custom PCB based "business" card that lets you play a version of Flappy Bird.

    311 parts132Apache-2.0
  • 4 layers536.5 × 385.7 mmDC27-badge, the printed circuit board in 3D

    DC27-badge

    netik/dc27_badge

    Defcon 27 "DaBomb!" badge.

    141 parts30Apache-2.0
  • 6 layers50 × 85 mmRusty tracker, the printed circuit board in 3D

    Rusty tracker

    korken89/rusty-tracker

    There are 2 versions of the board, based on:

    181 parts14
  • 6 layers131 × 80 mmOpenHardwareHolterMonitor, the printed circuit board in 3D

    OpenHardwareHolterMonitor

    OpenElectronicsLab/OpenHardwareHolterMonitor

    OpenHardware ECG Holter Monitor

    165 parts9GPL-3.0
  • 4 layers70 × 40 mmLora daq module, the printed circuit board in 3D

    Lora daq module

    danielkm-ee/lora_daq_module

    This board is powered by the Seeed Studios Wio-E5 LoRA module for use with it's designated antenna.

    81 parts1MIT
  • 2 layers114.4 × 26.7 mmRobot1, the printed circuit board in 3D

    Robot1

    iwasz/robot-hw-design

    Open this repo with KiCad. Firmware is here : http://github.com/iwasz/robot-firmware

    111 parts1

Questions

How big is the Design files Charger V0.4 PCB?

It measures 42 × 18 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Design files Charger V0.4 use?

71 parts, built around the MCP73833. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Design files Charger V0.4 KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/HotWheels/LiPo/design_files Charger V0.4/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Design files Charger V0.4 design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.