

Design files LiPo
My design files. Abandon all hope ye who enter here.
- Size
- 25.4 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 25
- Pads
- 57
- Tracks, vias
- 114, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files LiPo is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 25.4 × 25.4 mm with 18 parts on 25 nets, routed with 114 tracks and 8 vias.
It is built around the MCP73833. Its parts include 5 resistors, 4 diodes, 4 connectors, 2 capacitors and 1 IC. It belongs with the power boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1K | footprints:R_0805_HandSoldering | R1, R2, R3 |
| 2 | 10uF | Capacitors_SMD:C_1206 | C1, C2 |
| 1 | 10K | footprints:R_0805_HandSoldering | R4 |
| 1 | 4K7 | footprints:R_0805_HandSoldering | R5 |
| 1 | Beetje_Bottom | beetje_footprints:Beetje_Bottom | J2 |
| 1 | Beetje_Top | beetje_footprints:Beetje_Top | J4 |
| 1 | CHG | footprints:LED_0805_HandSoldering | D2 |
| 1 | D | footprints:D_SOD-123F | D4 |
| 1 | DONE | footprints:LED_0805_HandSoldering | D3 |
| 1 | JSTPH | footprints:JST_PH_S2B-PH-K_02x2.00mm_Angled | J3 |
| 1 | JSTSH | footprints:JST_SH_SM02B-SRSS-TB_02x1.00mm_Angled | J1 |
| 1 | MCP73833 | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | U1 |
| 1 | MadeInOregonRev25 | footprints:MadeInOregonRev25 | VAL |
| 1 | PWR | footprints:LED_0805_HandSoldering | D1 |
| 1 | SW_SPDT | footprints:SPST_SMD | SW1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 4 layers36 × 50.2 mm

Racer
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
83 parts3.8kApache-2.0 - 4 layers74.7 × 30 mm

- 4 layers49 × 74.9 mm

PCB business card
StuckAtPrototype/PCB_business_card_remake
A custom PCB based "business" card that lets you play a version of Flappy Bird.
311 parts132Apache-2.0 - 4 layers536.5 × 385.7 mm

- 6 layers50 × 85 mm

- 6 layers131 × 80 mm

OpenHardwareHolterMonitor
OpenElectronicsLab/OpenHardwareHolterMonitor
OpenHardware ECG Holter Monitor
165 parts9GPL-3.0 - 4 layers70 × 40 mm

Lora daq module
danielkm-ee/lora_daq_module
This board is powered by the Seeed Studios Wio-E5 LoRA module for use with it's designated antenna.
81 parts1MIT - 2 layers114.4 × 26.7 mm

Robot1
iwasz/robot-hw-design
Open this repo with KiCad. Firmware is here : http://github.com/iwasz/robot-firmware
111 parts1
Questions
How big is the Design files LiPo PCB?
It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files LiPo use?
18 parts, built around the MCP73833. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files LiPo KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Beetje/design_files_LiPo/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files LiPo design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.