

Design files attiny826
My design files. Abandon all hope ye who enter here.
- Size
- 25.4 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 46
- Pads
- 131
- Tracks, vias
- 421, 29
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files attiny826 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 25.4 × 25.4 mm with 30 parts on 46 nets, routed with 421 tracks and 29 vias.
It is built around the ATMEGA32U4-AU, MIC5225-3.3YM5 and MBR120. Its parts include 8 resistors, 5 diodes, 4 capacitors, 3 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MIC5225-3.3YM5
SOT23-53.3V 150mA Ultra-Low Current uCap Low Dropout RegulatorMicrochip TechnologyUncategorisedMBR120
SOD-123Schottky DiodesDoeshare
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10uF | beetje_footprints:C_0805 | C1, C2, C3 |
| 3 | 1K | beetje_footprints:R_0603 | R1, R2, R3 |
| 2 | 22 | beetje_footprints:R_0603 | R6, R7 |
| 2 | 4K7 | beetje_footprints:R_0603 | R4, R5 |
| 2 | MBR120 | beetje_footprints:D_SOD-123F | D4, D5 |
| 1 | 100K | beetje_footprints:R_0603 | R8 |
| 1 | 1uF | beetje_footprints:C_0603 | C4 |
| 1 | 5V | beetje_footprints:Jumper | JMP1 |
| 1 | 8 Mhz | beetje_footprints:Resonator_SMD_CTSC_1.3mmx3.2mm | Y1 |
| 1 | ATMEGA32U4-AU | beetje_footprints:TQFP-44_10x10mm_Pitch0.8mm | U1 |
| 1 | AVR-ISP-6 | beetje_footprints:Pin_Header_Straight_2x03_Pitch2.54mm | CON1 |
| 1 | Beetje Bottom | beetje_footprints:Beetje_Bottom | J2 |
| 1 | Beetje Top | beetje_footprints:Beetje_Top | J4 |
| 1 | D13 | beetje_footprints:LED_0603 | D3 |
| 1 | D4 | beetje_footprints:EVQ-P7A | SW2 |
| 1 | MIC5225-3.3 | beetje_footprints:SOT-23-5 | U2 |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | Polyfuse | beetje_footprints:R_1206 | F1 |
| 1 | RST | beetje_footprints:EVQ-P7A | SW1 |
| 1 | RX | beetje_footprints:LED_0603 | D2 |
| 1 | TX | beetje_footprints:LED_0603 | D1 |
| 1 | USB_OTG | beetje_footprints:USB_Micro-B_Molex-105017-0001 | X1 |
The 29 most common of 30 parts.
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers50.8 × 22.9 mm

Adafruit adafruit bluefruit le micro pcb adafruit bluefruit le micro rev b
oomlout/oomlout_oomp_project_bot_v_2
42 parts - 2 layers230.1 × 77.6 mm

- 2 layers112.6 × 42.6 mm

- 2 layers71.6 × 94.2 mm

Buta board v1
azerimaker/ButaBoard
This repo contains all the necessary design and fabrication files for the ButaBoard.
81 parts - 2 layers100 × 80.7 mm

Palette1202-OB
niltea/Palette1202
Nilgiri12-02ECは、イラストレーターのための左手デバイスです。 Clip studio Paint や、 Adobe Photoshopを使用した描画を快適に行うため設計されています。 各種ショートカットを使用するためのキーを備えていることはもちろん、 つまみを操作することで、ブラシサイズの変更やキャンバスの拡大・縮小等を快適に行うことができます。
55 parts4 - 2 layers31 × 30.5 mm

Christmas tree barrier
Petezah/roomba_wall_v2
An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba
17 parts32GPL-3.0 - 2 layers76.3 × 105.1 mm

- 2 layers28 × 20 mm

TMF882xBreakout
generationmake/TMF882xBreakout
Breakout board for the ams TMF8820, TMF8821 and TMF8828 multi-zone time-of-flight sensors
27 parts1
Questions
How big is the Design files attiny826 PCB?
It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files attiny826 use?
30 parts, built around the ATMEGA32U4-AU, MIC5225-3.3YM5 and MBR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files attiny826 KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Beetje/design_files_attiny826/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files attiny826 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.