Skip to the content
2 layers25.4 × 58.4 mmBase, the printed circuit board in 3D

My design files. Abandon all hope ye who enter here.

Size
25.4 × 58.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
26
Pads
82
Tracks, vias
157, 0
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 25.4 × 58.4 mm with 22 parts on 26 nets, routed with 157 tracks and 0 vias.

It is built around the ULN2803. Its parts include 13 connectors, 3 capacitors, 1 resistor, 1 IC and 1 diode.

Main components

1

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

22
QtyValueFootprintReferences
4CONN_01X01myFootPrints:Lego_PadP9, P9, P9, P9
1100uFCapacitors_ThroughHole:C_Radial_D7.5_L11.2_P2.5C1
110uFCapacitors_ThroughHole:C_Radial_D5_L11_P2.5C2
11uFCapacitors_ThroughHole:C_Disc_D3_P2.5C3
1330myFootPrints:Resistor_HorzR1
1A4 - A0Pin_Headers:Pin_Header_Straight_1x03P11
1A5 - A1Pin_Headers:Pin_Header_Straight_1x03P8
1BATT1Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2polP5
1BATT2Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2polP6
1LEDLEDs:LED-3MMD1
1LEFT_STEPPERlibrary:JST_B5B-XH-AP3
1MB225revmyFootPrints:MB225revVAL
1MadeInOregonRev25myFootPrints:MadeInOregonRev25VAL
1RIGHT_STEPPERlibrary:JST_B5B-XH-AP4
1SERVOPin_Headers:Pin_Header_Straight_1x03P7
1SPSTmyFootPrints:SW_Micro_SPSTSW1
1TRINKET_LEFTPin_Headers:Pin_Header_Straight_1x12P1
1TRINKET_RIGHTPin_Headers:Pin_Header_Straight_1x12P2
1ULN2803Housings_DIP:DIP-18_W7.62mmU1

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 2 layers31.7 × 58.4 mmOSTR, the printed circuit board in 3D

    OSTR

    aspro648/OSTR

    Open Source Turtle Robot

    32 parts88
  • 2 layers88.9 × 142.2 mmMiniJoyMiniStepper, the printed circuit board in 3D

    MiniJoyMiniStepper

    Believotron/Believotronics

    Believotronics is a low-cost DIY open source robotics platform you can print and build at work or from home. Our first projects are a MicroscopeBot and a ThroughholeSolderBot.

    94 parts8MIT
  • 2 layers120 × 80 mmRB2AMPController, the printed circuit board in 3D

    RB2AMPController

    pa3gsb/RB2AMPController

    Radioberry 2.0 Amp Controller

    67 parts7
  • 2 layers100 × 86.5 mmSensactHs, the printed circuit board in 3D

    SensactHs

    klaus-liebler/sensact

    Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

    319 parts4Apache-2.0
  • 2 layers160 × 111.4 mmMotordrive, the printed circuit board in 3D

    Motordrive

    mentarus/vend

    control boards for hackspace vending machine

    37 parts1
  • 2 layersDwmb, the printed circuit board in 3D

    Dwmb

    qweqq/dwmb

    Dude, where's my bike?!

    120 parts1MIT
  • 2 layers94.6 × 94.6 mmStar of devops, the printed circuit board in 3D

    Star of devops

    accelerando-consulting/star-of-devops

    The Star of Devops - an LED christmas star that you can control and update over wifi

    44 parts
  • 2 layers74.8 × 35.8 mmPen Plotter, the printed circuit board in 3D

    Pen Plotter

    ashishjoy19/Mini-Plotter

    The PCB Files for the Mini-Plotter

    36 parts

Questions

How big is the Base PCB?

It measures 25.4 × 58.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Base use?

22 parts, built around the ULN2803. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Base KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/OSTR/design_files/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Base design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.