Skip to the content
2 layers94.6 × 94.6 mmStar of devops, the printed circuit board in 3D

The Star of Devops - an LED christmas star that you can control and update over wifi

Size
94.6 × 94.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
44
Nets
38
Pads
148
Tracks, vias
434, 48
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
19 Nov 2018
Updated
23 Jan 2019

Overview

Star of devops is an open-source printed circuit board by accelerando-consulting, from the accelerando-consulting/star-of-devops repository on GitHub. It is a 2-layer board of 94.6 × 94.6 mm with 44 parts on 38 nets, routed with 434 tracks and 48 vias.

It is built around the ULN2803 and WS2812B. Its parts include 16 capacitors, 16 diodes, 2 ICs, 1 resistor and 1 switch. It belongs with the radio and wireless boards of this library.

Main components

2

Parts

44
QtyValueFootprintReferences
16CCapacitors_SMD:C_0805_HandSolderingC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16
16WS2812BLEDs:LED_WS2812B-PLCC4D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16
8MountingHole_PadAccelerando:pin_sewable_2.5mmH1, H2, H3, H4, H5, H6, H7, H8
1RResistors_SMD:R_0805_HandSolderingR1
1SW_MEC_5G_LEDAccelerando:SW_PUSH-12mm-LEDSW1
1ULN2803Housings_SOIC:SOIC-18W_7.5x11.6mm_Pitch1.27mmU2
1WeMos_miniwemos-d1-mini:wemos-d1-mini-connectors-onlyU1

Similar boards

  • 2 layers31.7 × 58.4 mmOSTR, the printed circuit board in 3D

    OSTR

    aspro648/OSTR

    Open Source Turtle Robot

    32 parts88
  • 2 layers88.9 × 142.2 mmMiniJoyMiniStepper, the printed circuit board in 3D

    MiniJoyMiniStepper

    Believotron/Believotronics

    Believotronics is a low-cost DIY open source robotics platform you can print and build at work or from home. Our first projects are a MicroscopeBot and a ThroughholeSolderBot.

    94 parts8MIT
  • 2 layers120 × 80 mmRB2AMPController, the printed circuit board in 3D

    RB2AMPController

    pa3gsb/RB2AMPController

    Radioberry 2.0 Amp Controller

    67 parts7
  • 2 layers100 × 86.5 mmSensactHs, the printed circuit board in 3D

    SensactHs

    klaus-liebler/sensact

    Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

    319 parts4Apache-2.0
  • 2 layers160 × 111.4 mmMotordrive, the printed circuit board in 3D

    Motordrive

    mentarus/vend

    control boards for hackspace vending machine

    37 parts1
  • 2 layersDwmb, the printed circuit board in 3D

    Dwmb

    qweqq/dwmb

    Dude, where's my bike?!

    120 parts1MIT
  • 2 layers74.8 × 35.8 mmPen Plotter, the printed circuit board in 3D

    Pen Plotter

    ashishjoy19/Mini-Plotter

    The PCB Files for the Mini-Plotter

    36 parts
  • 2 layers151 × 90.9 mmNucleo shield, the printed circuit board in 3D

    Nucleo shield

    clementleger/chc

    Configurable Home Controller

    77 partsGPL-3.0

Questions

How big is the Star of devops PCB?

It measures 94.6 × 94.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Star of devops use?

44 parts, built around the ULN2803 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Star of devops KiCad files?

From the accelerando-consulting/star-of-devops repository on GitHub, at the commit this page was made from: the board is pcb/star_of_devops.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Star of devops design in my own project?

Its repository states no licence, so its author keeps all rights: ask accelerando-consulting before reusing the design.