Skip to the content
2 layers38.1 × 58.4 mmBase, the printed circuit board in 3D

My design files. Abandon all hope ye who enter here.

Size
38.1 × 58.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
37
Pads
122
Tracks, vias
274, 0
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 38.1 × 58.4 mm with 32 parts on 37 nets, routed with 274 tracks and 0 vias.

It is built around the ULN2803. Its parts include 10 connectors, 6 resistors, 4 capacitors, 4 diodes and 3 transistors.

Main components

1

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

32
QtyValueFootprintReferences
4CONN_01X01library:Lego_PadP9, P9, P9, P9
2100library:R__7.62mmR2, R5
210Klibrary:R__7.62mmR6, R7
21uFlibrary:C_Disc_D3_P2.5C3, C4
2330library:R__7.62mmR3, R4
2LEDlibrary:LED-3MMD3, D4
2OPTO_NPNlibrary:LED-3MMQ1, Q2
1100uFlibrary:C_Radial_D7.5_L11.2_P2.5C1
110uFlibrary:C_Radial_D5_L11_P2.5C2
1BATT1library:TerminalBlock_Pheonix_PT-3.5mm_2polP5
1BATT2library:TerminalBlock_Pheonix_PT-3.5mm_2polP6
1IR LEDlibrary:LED-3MMD5
1IR_LEDlibrary:LED-3MMD2
1LEFT_STEPPERlibrary:JST_B5B-XH-AP3
1MB225revlibrary:MB225revVAL
1MCP1702TO_SOT_Packages_THT:TO-92_Inline_WideU2
1MadeInOregonRev25library:MadeInOregonRev25VAL
1NPNTO_SOT_Packages_THT:TO-92_Inline_WideQ3
1RIGHT_STEPPERlibrary:JST_B5B-XH-AP4
1SERVOlibrary:Pin_Header_Straight_1x03P7
1SPSTlibrary:SW_Micro_SPSTSW1
1ULN2803library:DIP-18_W7.62mmU1
1microbit_edge_connectorlibrary:MicroBit40J3

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 2 layers31.7 × 58.4 mmOSTR, the printed circuit board in 3D

    OSTR

    aspro648/OSTR

    Open Source Turtle Robot

    32 parts88
  • 2 layers88.9 × 142.2 mmMiniJoyMiniStepper, the printed circuit board in 3D

    MiniJoyMiniStepper

    Believotron/Believotronics

    Believotronics is a low-cost DIY open source robotics platform you can print and build at work or from home. Our first projects are a MicroscopeBot and a ThroughholeSolderBot.

    94 parts8MIT
  • 2 layers120 × 80 mmRB2AMPController, the printed circuit board in 3D

    RB2AMPController

    pa3gsb/RB2AMPController

    Radioberry 2.0 Amp Controller

    67 parts7
  • 2 layers100 × 86.5 mmSensactHs, the printed circuit board in 3D

    SensactHs

    klaus-liebler/sensact

    Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

    319 parts4Apache-2.0
  • 2 layers160 × 111.4 mmMotordrive, the printed circuit board in 3D

    Motordrive

    mentarus/vend

    control boards for hackspace vending machine

    37 parts1
  • 2 layersDwmb, the printed circuit board in 3D

    Dwmb

    qweqq/dwmb

    Dude, where's my bike?!

    120 parts1MIT
  • 2 layers94.6 × 94.6 mmStar of devops, the printed circuit board in 3D

    Star of devops

    accelerando-consulting/star-of-devops

    The Star of Devops - an LED christmas star that you can control and update over wifi

    44 parts
  • 2 layers74.8 × 35.8 mmPen Plotter, the printed circuit board in 3D

    Pen Plotter

    ashishjoy19/Mini-Plotter

    The PCB Files for the Mini-Plotter

    36 parts

Questions

How big is the Base PCB?

It measures 38.1 × 58.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Base use?

32 parts, built around the ULN2803. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Base KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/OSTR/design_files_MicroBit V0/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Base design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.