

Base
My design files. Abandon all hope ye who enter here.
- Size
- 48.3 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 15
- Pads
- 65
- Tracks, vias
- 162, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 48.3 × 25.4 mm with 39 parts on 15 nets, routed with 162 tracks and 5 vias.
Its parts include 22 connectors, 5 resistors, 5 diodes, 1 capacitor and 1 IC.
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | Conn_01x01 | footprints:testPad | J1, J2, J3, J3, J4, J4, J5, J10, J10, J11, J11, J12, J12, J13, J14, J15 +4 |
| 1 | 0.1 uF | Capacitors_SMD:C_1206 | C1 |
| 1 | 330 | Resistors_SMD:R_0805 | R1 |
| 1 | 330 | footprints:R_0402 | R3 |
| 1 | 330 | Resistors_SMD:R_0603 | R2 |
| 1 | 330 | Resistors_SMD:R_1206 | R0 |
| 1 | 330 | Resistors_SMD:R_0201 | R4 |
| 1 | AVR-ISP-6 | footprints:AVR-ISP-6 | CON1 |
| 1 | Battery | footprints:BATT_CR2032_SMD | BT1 |
| 1 | CONN_01X01 | footprints:Pin_Header_Straight_1x01 | P5 |
| 1 | IC1 | footprints:SOIJ-8_5.3x5.3mm_Pitch1.27mm | IC1 |
| 1 | LED | LEDs:LED_0603 | D2 |
| 1 | LED | LEDs:LED_0805 | D1 |
| 1 | LED | LEDs:LED_0402 | D3 |
| 1 | LED | LED_0201 | D4 |
| 1 | LED | LEDs:LED_1206 | D0 |
| 1 | LOGO | footprints:SMDChallenge | G*** |
| 1 | LOGO | footprints:2019 | G*** |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | SW_Push_SPDT | footprints:SPST_SMD | SW1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers24.4 × 24.4 mm

OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
39 parts2.1k - 2 layers100 × 33.5 mm

Breakout 48pin 174917-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
39 parts1.2k - 2 layers33 × 26 mm

VL53L1x pwm
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915 - 2 layers43.4 × 18.8 mm

Usb sniffer lite
ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040
39 parts706BSD-3-Clause - 2 layers40 × 20 mm

ESP8266
windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器
39 parts690MIT - 2 layers100 × 70.3 mm

- 2 layers81.3 × 53.3 mm

RGB LED 1.4
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
39 parts429GPL-2.0 - 2 layers65.7 × 44.8 mm

Questions
How big is the Base PCB?
It measures 48.3 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Base use?
39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/Attiny85Challenge2019/design_files/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.