
Vga breakout
asinghani/mpw3-bringup
Bringup and testing of MPW-3 chips from SKY130 tapeout in Nov 2021

Bringup and testing of MPW-3 chips from SKY130 tapeout in Nov 2021
Mpw3-common is an open-source printed circuit board by asinghani, from the asinghani/mpw3-bringup repository on GitHub. It is a 4-layer board of 91.4 × 54.6 mm with 69 parts on 100 nets, routed with 1,277 tracks and 347 vias.
It is built around the W25Q32JVSSIQ, MCP23017-E/SS and TPS76201DBV, with the DS1077LU-50 and MIC5504-3.3YM5 among its other parts. Its parts include 20 capacitors, 12 resistors, 11 ICs, 8 connectors and 3 diodes.
Experiments in bringing up SKY130 MPW-3 chips from the initial tapeout in November 2021. Similarly to MPW-1, the standardized "Caravel" padframe used in this tapeout had hold-time violations between
Characterization PCB Schematic
FTDI Breakout Schematic
VGA Breakout Schematic
boards/ - KiCAD design files for breakout PCBsparts/ - I/O characterization results for several diesscripts/i2c_iface.py - Script for interfacing with the voltage regulators, clock generator, and GPIO expanders on the characterization boardprograms/ - Programs for running on the Caravel processor for the different applications
aes_test.c - Test the AES core on crypto-accelerator-chip-v2 designgpio_config_io_dino.py - GPIO configuration for the VGA runner gamegpio_config_io_pong.py - GPIO configuration for the VGA pong gamepicorf0_test.c - Test program for the picoRF0 custom CPU coreread_ident.c - Reads the ROM identifier and build number in the SHA and AES coressha256_test.c - Test the SHA256 core with some test vectorsspi_fram.c - Test program for using the Caravel SPI master to interface with an FRAM chipuart_working.c - Workaround for UART RX on MPW-3 Caravel| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C7, C23, C24, C25, C26, C27 |
| 8 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R11, R13 |
| 8 | 1u | Capacitor_SMD:C_0603_1608Metric | C4, C6, C10, C11, C14, C15, C16, C22 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C5, C12, C13 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R7, R8, R9 |
| 3 | GND_TP | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP10, TP11, TP12 |
| 3 | MCP23017 | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U9, U10, U11 |
| 2 | TPS76201 | Package_TO_SOT_SMD:SOT-23-5 | U5, U6 |
| 2 | VC_TP | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP8, TP9 |
| 2 | VU_TP | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP6, TP7 |
| 1 | 0R, DNF | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 3V3_TP | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP4 |
| 1 | BTN_RST | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | CLK_DIS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | DBG | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | DS1077LU-50 | DS1077LU-50:SOP65P490X110-8N | U8 |
| 1 | FLASH_HEADER | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | GPIO | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | HDR_LEFT | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J9 |
| 1 | HDR_RIGHT | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J10 |
| 1 | HKSPI_HEADER | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | JP_CARAVEL | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP4 |
| 1 | JP_IO | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP2 |
| 1 | JP_USER | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP3 |
| 1 | MCP1319MT-29LE | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MICROMOD-Standoff | MicroMod-Sparkfun:MicroMod-Standoff | H1 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | PWR_OUT_HDR | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | RST_TP | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | TPL0102-100PWR | TPL0102:SOP65P640X120-14N | U7 |
| 1 | UART_HEADER | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | XCLK | Connector_Coaxial:SMB_Jack_Vertical | J8 |
| 1 | caravel-M.2-card | MicroMod-Sparkfun:M.2-CONNECTOR-E | U1 |

asinghani/mpw3-bringup
Bringup and testing of MPW-3 chips from SKY130 tapeout in Nov 2021

asinghani/mpw3-bringup
Bringup and testing of MPW-3 chips from SKY130 tapeout in Nov 2021

asinghani/mpw3-bringup
Bringup and testing of MPW-3 chips from SKY130 tapeout in Nov 2021

henryhallam/quickie-mc-hw
KiCAD design for the Quick-E motor controller (inverter)


nkrackow/SingularitySurfer-FPGA-Lock-In-Amplifier
Repository for the development of an FPGA based DSP Lock-In Amplifier

humanHardDrive/Gamecube-Controller-Wireless-Adapter
A wireless adapter for 4 Gamecube controllers

asinghani/ibm-5151-controller
Building a VT100 emulator out of an IBM 5151 monitor and an FPGA


mattchesters/zmk-apple-desktop-bus-keyboard
ZMK shield for Apple Desktop Bus Keyboard

ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
It measures 91.4 × 54.6 mm and has 4 copper layers, 1.6 mm thick.
69 parts, built around the W25Q32JVSSIQ, MCP23017-E/SS, TPS76201DBV and DS1077LU-50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the asinghani/mpw3-bringup repository on GitHub, at the commit this page was made from: the board is boards/mpw3-common/mpw3-common.kicad_pcb and its schematic boards/button-board/button-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask asinghani before reusing the design.