

QURO hardware training
Learining STM32
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 20
- Pads
- 79
- Tracks, vias
- 125, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Sep 2022
- Updated
- 16 Mar 2023
Overview
QURO hardware training is an open-source printed circuit board by Ashutoshkarve007, from the Ashutoshkarve007/STM32_Learning repository on GitHub. It is a 2-layer board with 32 parts on 20 nets, routed with 125 tracks and 0 vias.
It is built around the LNK625DG and MB6S-TP. Its parts include 10 capacitors, 9 resistors, 4 connectors, 3 diodes and 2 inductors.
Main components
2README
README.mdSTM32_Learning
Learn STM32 together. Create your name folder, >> create pull request.
#add to discord webhook lk
Slave Board
pin 1 - VCC Modbus side pin 2 - DO pin 3 - CLK pin 4 - rst* pin 5 - GND
Master - Slave
Request Data - {slave_id, 0x06, CRC_L, CRC_H}
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Screw_Terminal_01x01 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360272_1x01_Horizontal_ScrewM2.6 | J1, J2, J3, J4 |
| 2 | CGRM4007-G | Diode_SMD:D_MiniMELF | D1, D2 |
| 1 | 0805--10E | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1.2 mH | Inductor_THT:L_Radial_D8.7mm_P5.00mm_Fastron_07HCP | L1 |
| 1 | 100uF 10V | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C9 |
| 1 | 105K | Resistor_SMD:R_0815_2038Metric | R5 |
| 1 | 10uF 25V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C7 |
| 1 | 16K | Resistor_SMD:R_0815_2038Metric | R4 |
| 1 | 180K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 18E | Resistor_SMD:R_0815_2038Metric | R6 |
| 1 | 1nF 250V | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C3 |
| 1 | 1nF 50V | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C10 |
| 1 | 1nF 50V | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C6 |
| 1 | 1uF 50V | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C4 |
| 1 | 221E | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 3.92K | Resistor_SMD:R_0815_2038Metric | R8 |
| 1 | 330pF 50V | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C5 |
| 1 | 4.7 uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 4.7K | Resistor_SMD:R_0815_2038Metric | R7 |
| 1 | 4.7uF 400V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 4.7uF 400V | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C1 |
| 1 | 470uF 10V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C8 |
| 1 | 909E | Resistor_SMD:R_0815_2038Metric | R9 |
| 1 | EE13 | Transformer_THT:Transformer_Wuerth_750343373 | T1 |
| 1 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | LNK625DG | Package_SO:PowerIntegrations_SO-8C | IC1 |
| 1 | MB6S-TP | Package_TO_SOT_SMD:TO-269AA | BR1 |
| 1 | SS24-E3_52T | Diode_SMD:D_MiniMELF | D3 |
More from Ashutoshkarve007/STM32_Learning
1- 2 layers78.7 × 58.4 mm

Similar boards
- 2 layers100 × 44 mm

Opensolder
howie-j/opensolder
Fully open source JBC T245-compatible soldering station
69 parts55GPL-3.0 - 2 layers70.5 × 40.1 mm

Kicad flyback
nguyenthanhluan171205-tech/flyback-converter-10w
Design, simulation, PCB layout, and experimental validation of a 10W Flyback converter (80-220VAC to 12VDC, 90% efficiency).
63 parts - 4 layers62 × 67 mm

Adapter
tridentsx/tmc-gateway
TinyGo firmware for an RP2350-based USB/PoE-LAN instrument gateway: bridges USBTMC/USB488 and HiSLIP to GPIB
92 parts - 2 layers50 × 23.2 mm

Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
32 parts1kGPL-3.0 - 2 layers136.8 × 54.2 mm

Retropie zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
32 parts915 - 2 layers

- 2 layers16 × 20 mm

ESPKey
octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller
32 parts353GPL-2.0 - 2 layers82 × 40.9 mm

Display7447
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
32 parts269
Questions
What parts does the QURO hardware training use?
32 parts, built around the LNK625DG and MB6S-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the QURO hardware training KiCad files?
From the Ashutoshkarve007/STM32_Learning repository on GitHub, at the commit this page was made from: the board is shambhavi/QURO hardware training/5V/5V.kicad_pcb and its schematic shambhavi/QURO hardware training/5V/5V.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the QURO hardware training design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ashutoshkarve007 before reusing the design.