
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

8x1088AS LED Matrix Board
1088as is an open-source printed circuit board by ashep, from the ashep/8x1088as repository on GitHub. It is a 2-layer board of 128.3 × 64.3 mm with 144 parts on 149 nets, routed with 1,384 tracks and 124 vias.
It is built around the MAX7219M. Its parts include 80 connectors, 16 ICs, 8 capacitors and 8 resistors. It belongs with the lEDs and displays boards of this library.

The 1088AS 3D model has been taken from aniline. All the credit goes to the author.
Initial release.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | MountingHole | FootPrints:MountingHole_3.2mm_M3 | H1, H2, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23 +16 |
| 16 | CLK | FootPrints:PinHeader_1x01_P2.54mm_Vertical | J7, J9, J17, J19, J27, J29, J37, J39, J47, J49, J57, J59, J67, J69, J77, J79 |
| 16 | CS | FootPrints:PinHeader_1x01_P2.54mm_Vertical | J4, J5, J14, J15, J24, J25, J34, J35, J44, J45, J54, J55, J64, J65, J74, J75 |
| 16 | GND | FootPrints:PinHeader_1x01_P2.54mm_Vertical | J6, J8, J16, J18, J26, J28, J36, J38, J46, J48, J56, J58, J66, J68, J76, J78 |
| 16 | Vcc | FootPrints:PinHeader_1x01_P2.54mm_Vertical | J1, J2, J11, J12, J21, J22, J31, J32, J41, J42, J51, J52, J61, J62, J71, J72 |
| 8 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | 1088A LED Matrix | FootPrints:1088A LED Matrix | U1, U3, U5, U7, U9, U11, U13, U15 |
| 8 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | DIN | FootPrints:PinHeader_1x01_P2.54mm_Vertical | J10, J20, J30, J40, J50, J60, J70, J80 |
| 8 | DOUT | FootPrints:PinHeader_1x01_P2.54mm_Vertical | J3, J13, J23, J33, J43, J53, J63, J73 |
| 8 | MAX7219 | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U2, U4, U6, U8, U10, U12, U14, U16 |

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.


StarGate01/hl-alyx-glove
Firmware and Hardware for a Half-Life: Alyx Gravity Glove Replica


Eigenbaukombinat/glowboard
The Glowboard Plotter plots images using 64 UV LEDs attached in a line moved over a 120cmx60cm glow-in-the-dark sheet by a stepper.



It measures 128.3 × 64.3 mm and has 2 copper layers, 1.6 mm thick.
144 parts, built around the MAX7219M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ashep/8x1088as repository on GitHub, at the commit this page was made from: the board is kicad/1088as.kicad_pcb and its schematic kicad/1088as.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ashep before reusing the design.