2 layers148.5 × 90 mm
ZxRebornClock
popovb/zxRebornClock
Часы на ГРИ ИН-14 с синхронизацией времени через интернет
125 partsMIT
2 layers62 × 46 mm
HANmodule
Asbjoern/Kamstrup-Radius-Interface42ESP8266 interface for Kamstrup (Radius provided) electricity meter
- Size
- 62 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 30
- Pads
- 134
- Tracks, vias
- 252, 126
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jan 2020
- Updated
- 29 Apr 2026
Overview
HANmodule is an open-source printed circuit board by Asbjoern, from the Asbjoern/Kamstrup-Radius-Interface repository on GitHub. It is a 2-layer board of 62 × 46 mm with 46 parts on 30 nets, routed with 252 tracks and 126 vias.
It is built around the ESP-12F, TLV62568DBV and LL4148, with the M20-7920342R among its other parts. Its parts include 22 resistors, 9 capacitors, 4 diodes, 3 ICs and 3 transistors. It belongs with the ESP8266 boards of this library.
Main components
4
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
TLV62568DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 1A 2.5V~5.5V 35uA 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
M20-7920342R
-Female HeadersHarwin
README
README.mdKamstrup-Radius Interface
ESP8266 interface for Kamstrup (Radius provided) electricity meter
Please also have a look the ESPHome component based on this code and working on the HAN module:
https://github.com/Asbjoern/ESPHome-Kamstrup-Radius
This project interfaces with the Kampstrup electricity meter provided by Radius in Denmark.
It decrypts the messages pushed on the HAN port and publishes the readings on MQTT.
There is also a proof of concept Python3 script (Kamstrup reader.py). Reads serialport connected to meter, decrypts, parses and publishes result to mqtt.
Based on Python example provided by Radius.
Project contains:
- HAN module for the Radius provided Kamstrup Omnipower electricity meters
- Arduino based software for a ESP8266 module. For receiving, decrypting and parsing push messages from meter.
- Publish data to MQTT
Project uses:
- Relevant files from mbed TLS library https://tls.mbed.org/
- Modified mbusparser library from Jalla2000's norwegian project https://github.com/jalla2000/kamstrup-mqtt
- Use Wifimanager library (or similar) to get captive portal and configuration
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R8, R9, R10, R11, R16 |
| 5 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12, R13, R15, R19, R20 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5, C7, C9 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C8 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R4 |
| 2 | LL4148 | Diode_SMD:D_MiniMELF | D3, D4 |
| 2 | SI2301DS_P-FET | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 0.47F | housings:c_sup 17,3x15x8.5P12 | C2 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R21 |
| 1 | 1.5u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6 |
| 1 | 110k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 16k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4 |
| 1 | 2.2UH 4x4mm | Inductor_SMD:L_Bourns-SRN4018 | L1 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R18 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 4R7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 4k3 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R17 |
| 1 | 5R6 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | ESP-12F | RF_Module:ESP-12E | U3 |
| 1 | Fault | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Heartbeat | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | M20-7920342R | SamacSys_Parts:M20-7920342R | J1 |
| 1 | NC | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R22 |
| 1 | NCP308SNADJT1G | Package_SO:TSOP-6_1.65x3.05mm_P0.95mm | U2 |
| 1 | Prog | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | Reset | Button_Switch_SMD:Panasonic_EVQPUM_EVQPUD | SW1 |
| 1 | SI2302DS/2N7002 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | TLV62568DBV | Package_TO_SOT_SMD:SOT-23-5 | U1 |
Questions
How big is the HANmodule PCB?
It measures 62 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HANmodule use?
46 parts, built around the ESP-12F, TLV62568DBV, LL4148 and M20-7920342R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HANmodule KiCad files?
From the Asbjoern/Kamstrup-Radius-Interface repository on GitHub, at the commit this page was made from: the board is pcb/HANmodule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HANmodule design in my own project?
Its repository states no licence, so its author keeps all rights: ask Asbjoern before reusing the design.
Similar boards
- 6 layers276 × 93.5 mm
Mnt reform motherboard
Junkz3/wrench-board
A senior microsoldering technician, available to every repair shop from the seasoned pro to the apprentice. Powered by Claude Opus 5
505 parts259 - 4 layers100 × 68 mm
Basic ecp5-pcb
mattvenn/basic-ecp5-pcb
Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs
75 parts144CC0-1.0 - 2 layers131.5 × 184.4 mm
- 4 layers53 × 42 mm
MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
117 parts30GPL-3.0 - 4 layers101.8 × 83 mm
- 4 layers29 × 16.7 mm
Ram pak
esden/glasgow-addons
Various interface addon boards and expansions for the Glasgow Digital Interface Explorer
29 parts19 - 4 layers42.3 × 69.7 mm
